Manufacturer profile

BARTEC Top Holding GmbH

BARTEC Top Holding GmbH is a manufacturer based in Bad Mergentheim, Germany. [S2][S1]

Country
Germany [S1]
City
Bad Mergentheim [S2]
Website
bartec.com

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Protection and zones
The page lists Ex db IIC and Ex tb IIIC protection for Zones 1, 2, 21 and 22 with IP66. [S4]
Construction and temperature
The aluminium family has a published ambient range from minus 60 to plus 60 degrees Celsius. [S5]
BARTEC EFDC flameproof control stations
Official product image [S6]

Evidence scope

The retained official product route documents: BARTEC documents EFDC as a completed flameproof control-station family. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S10]

Explosion Proof Control Station

Documented series: BARTEC EFDC flameproof control stations

BARTEC documents EFDC as a completed flameproof control-station family. [S6]

Protection and zones
The page lists Ex db IIC and Ex tb IIIC protection for Zones 1, 2, 21 and 22 with IP66. [S4]
Construction and temperature
The aluminium family has a published ambient range from minus 60 to plus 60 degrees Celsius. [S5]
  • BARTEC EFDC flameproof control stations [S6]

Selection fit: Product facts remain family scoped; the headquarters is not asserted as the EFDC factory. [S9]

Explosion Proof Junction Box

Documented series: BARTEC Ethernet and PoE junction box 07-3103-1105/9007

BARTEC documents 07-3103-1105/9007 as an exact Ethernet and PoE hazardous-area junction box. [S7]

Documented specifications for Explosion Proof Junction Box
Service temperature-40 °C [S15]
Connection and data function
The Ex e polyester box connects four CAT cable wire pairs through spring-loaded terminals and supports PoE. [S11]
Transmission and zones
The page lists transmission rates to 1 Gbit per second and suitability for Zones 1 and 21. [S12]
  • BARTEC Ethernet and PoE junction box 07-3103-1105/9007 [S7]

Selection fit: The exact product route did not fall back to the generic finder; headquarters is not asserted as a factory. [S13]

Explosion Proof Light

Documented series: BARTEC Escape Ex1 emergency LED lighting fixture

BARTEC documents Escape Ex1 as a completed emergency LED fixture for hazardous locations. [S8]

Documented specifications for Explosion Proof Light
Service temperature-30 °C [S20]
Ingress protectionIP66 [S21]
Materialpolycarbonate [S22]
Efficiency and service life
The fixture is documented to 126 lumens per watt and more than 100,000 operating hours. [S16]
Approvals and environmental limits
The page lists ATEX and IECEx Zone 1 and 21, IP66 and IP67, IK08 and minus 30 to plus 50 degrees Celsius operation. [S17]
  • BARTEC Escape Ex1 emergency LED lighting fixture [S8]

Selection fit: The headquarters route establishes the canonical entity, not the product's manufacturing site. [S18]

Product range and documented series

BARTEC documents EFDC as a completed flameproof control-station family. [S6]

  • BARTEC EFDC flameproof control stations [S6]Source note: BARTEC EFDC flameproof control stations
  • BARTEC Ethernet and PoE junction box 07-3103-1105/9007 [S7]Source note: BARTEC Ethernet and PoE junction box 07-3103-1105/9007
  • BARTEC Escape Ex1 emergency LED lighting fixture [S8]Source note: BARTEC Escape Ex1 emergency LED lighting fixture

Procurement fit

The headquarters entity, BARTEC Top Holding GmbH in Bad Mergentheim, Germany, establishes the canonical corporate record. For the EFDC flameproof control stations, the 07-3103-1105/9007 Ethernet and PoE junction box, and the Escape Ex1 emergency LED fixture, the supplied documentation does not assert the headquarters as the manufacturing site. The product facts therefore remain family scoped, and the procurement route did not resolve to a generic finder.

Technical capabilities

The EFDC flameproof control stations provide Ex db IIC and Ex tb IIIC protection for Zones 1, 2, 21 and 22 at IP66, in an aluminium family rated minus 60 to plus 60 degrees Celsius ambient. The 07-3103-1105/9007 junction box uses an Ex e polyester enclosure, spring-loaded terminals for four CAT cable wire pairs, supports PoE, transmits to 1 Gbit per second, and suits Zones 1 and 21. The Escape Ex1 fixture is polycarbonate, RAL 7035, IP66 and IP67, IK08, rated minus 30 to plus 50 degrees Celsius, 126 lumens per watt, and more than 100,000 operating hours, approved ATEX and IECEx for Zone 1 and 21.

Markets and applications

The documented scope covers hazardous area work in process plants and infrastructure where flammable gases or combustible dusts may be present. Control stations address local actuator and signalling duties in Zones 1, 2, 21 and 22. The 07-3103-1105/9007 junction box supports Ethernet and PoE networking in Zone 1 and 21 areas. The Escape Ex1 fixture delivers emergency lighting under ATEX and IECEx for Zone 1 and 21 sites.

Evidence limitations

Several procurement fields are not publicly documented, including country of manufacture for the EFDC control stations, the 07-3103-1105/9007 junction box, and the Escape Ex1 fixture, along with lead times, unit pricing, distributor network, and warranty terms. ATEX and IECEx are stated for the Escape Ex1 only, while equivalent certification listings for the EFDC stations and the 07-3103-1105/9007 box are not publicly documented. EMC test data and detailed mechanical drawings are likewise not publicly documented.

Editorial summary

BARTEC Top Holding GmbH is a German manufacturer headquartered in Bad Mergentheim. The product range documented in this profile spans three hazardous area equipment categories: explosion proof control stations, explosion proof junction boxes, and explosion proof lights. Each category is represented by a single named series sourced from the manufacturer's published catalogue pages, and the entries below restrict themselves to those specific lines.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Identity and location are retained from the cited official source. Product facts and visual are limited to BARTEC EFDC flameproof control stations; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S10]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to BARTEC Ethernet and PoE junction box 07-3103-1105/9007; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S14]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to BARTEC Escape Ex1 emergency LED lighting fixture; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S19]Company-stated

Frequently asked questions

What Explosion-Proof Lighting product is documented for BARTEC Top Holding GmbH?

The retained product material names BARTEC EFDC flameproof control stations. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published protection and zones should a buyer compare?

The cited product material records: The page lists Ex db IIC and Ex tb IIIC protection for Zones 1, 2, 21 and 22 with IP66. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published construction and temperature should a buyer compare?

The cited product material records: The aluminium family has a published ambient range from minus 60 to plus 60 degrees Celsius. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S10]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.