Procurement directory
Balancing Valve Manufacturers
Compare the documented product facts shown for each cited route before opening a dossier. A missing dimension remains absent rather than being inferred from a related series.
- Coverage
- 8 canonical company dossiers
- Compare here
- Product range, product facts and selection scope
- Evidence basis
- Official product routes retained per category
Source-bound comparison
Compare documented product facts
Each cell repeats only the product facts retained for that company’s category evidence. Open the dossier for the source note and evidence boundary.
| Manufacturer | Retained product facts |
|---|---|
| Cimberio S.p.A. |
|
| Victaulic |
|
| Taco Comfort Solutions |
|
| Caleffi S.p.A. |
|
| Crane Fluid Systems |
|
| GIACOMINI S.p.A. |
|
| Danfoss |
|
| FlowCon International ApS |
|
-
Cimberio S.p.A.
Category evidenceCimberio documents Cim 790 as an automatic balancing valve.
- Published product fact
- Cim 790 automatic balancing valve with product codes across DN15, DN20, DN25, DN32, DN40 and DN50 and a stated PN25 nominal pressure.
-
Victaulic
Category evidenceVictaulic documents the TA Series 78BL as a balancing ball valve for hydronic balancing.
- Published product fact
- TA Series 78BL balancing ball valve with shut-off, manual-throttling and measuring functions, in 1/2- to 2-inch sizes (DN15-DN50) and up to 28 bar stated pressure.
- Published product fact
- Series 78Y Y-Strainer/Ball Valve Combination in 1/2–2 in / DN15–DN50 sizes
-
Taco Comfort Solutions
Category evidenceTaco documents Accu-Flo fixed-port Venturi balancing valves with calibrated presetting and a tamper-resistant memory stop.
- Published product fact
- Accu-Flo fixed-port Venturi balancing valves with flow measurement independent of stem and ball position, calibrated presetting and a tamper-resistant memory stop.
- Published product fact
- KV Series vertical in-line pumps with a close-coupled design.
-
Caleffi S.p.A.
Category evidenceCaleffi documents Series 130 balancing valves for hydraulic systems with a Venturi flow meter and pressure test ports.
- Published product fact
- Series 130 balancing valve for hydraulic systems with a Venturi flow meter, 16 bar maximum working pressure and stated water or glycol service.
- Published product fact
- Caleffi Series 6446 motorised two-way ball valves, represented by item 644646.
-
Crane Fluid Systems
Category evidenceCrane Fluid Systems documents the bronze D923 low-flow double regulating valve for precise flow regulation.
- Published product fact
- D923 bronze low-flow double regulating valve, DN15, with 1/2-inch and 3/4-inch parallel-threaded options and a published ±5% flow-regulation accuracy statement.
-
GIACOMINI S.p.A.
Category evidenceGIACOMINI documents R206B as a static balancing valve with a fixed-orifice Venturi principle.
- Published product fact
- R206B static fixed-orifice Venturi balancing valve with female-female connections, 5-110 °C working temperature and 25 bar maximum working pressure.
- Published product fact
- A202 field-adjustable pressure reducing valve.
-
Danfoss
Category evidenceDanfoss documents the LENO MSV-BD DN 20 internal-thread manual balancing valve within its static-balancing route.
- Published product fact
- LENO MSV-BD DN 20 internal-thread manual balancing valve, product 003Z4002, with G 3/4 connection and PN 20 pressure class.
- Published product fact
- Danfoss GBC M motorised shut-off ball valves with MQT electric actuator.
-
FlowCon International ApS
Category evidenceFlowCon documents E-JUST as an externally adjustable flow-control cartridge within its dynamic-balancing route.
- Published product fact
- FlowCon E-JUST externally adjustable flow-control cartridges covering 100-17,000 l/h, with optional valve bodies from DN15 to DN50; larger sizes are described separately as FlowCon SH valves up to DN150.