Manufacturer profile

Danfoss

Danfoss is a manufacturer based in Nordborg, Denmark. [S2][S1]

Country
Denmark [S1]
City
Nordborg [S2]
LENO MSV-BD, DN 20
Official product image [S63]

Evidence scope

The retained official product route documents: Danfoss documents the LENO MSV-BD DN 20 internal-thread manual balancing valve within its static-balancing route. This dossier uses that cited route as the editorial scope. [S12]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S14]

Balancing Valve

Documented series: LENO MSV-BD DN 20 internal-thread manual balancing valve, product 003Z4002, with G 3/4 connection and PN 20 pressure class.

Danfoss documents the LENO MSV-BD DN 20 internal-thread manual balancing valve within its static-balancing route. [S12]

  • LENO MSV-BD DN 20 internal-thread manual balancing valve, product 003Z4002, with G 3/4 connection and PN 20 pressure class. [S4]

Selection fit: Use the LENO MSV-BD route for static/manual balancing when the stated DN 20 internal-thread configuration fits; confirm final valve selection and installation conditions with Danfoss. [S13]

Electric Ball Valve

Documented series: Danfoss GBC M motorised shut-off ball valves with MQT electric actuator.

Danfoss documents GBC M with MQT as a motorised shut-off ball valve for refrigeration liquid, suction and hot-gas lines. [S15]

Documented specifications for Electric Ball Valve
Service temperature-40°C [S20]
Flow path
The GBC M route describes a full-port, bidirectional motorised shut-off ball-valve line. [S16]
Stated operating range
The cited product route states operating-temperature coverage from -40 to 150 °C. [S17]
  • Danfoss GBC M motorised shut-off ball valves with MQT electric actuator. [S5]

Selection fit: Use the GBC M route when a full-port, bidirectional electric shut-off ball valve suits refrigeration liquid, suction or hot-gas service within the cited temperature range. Confirm refrigerant, pressure, connection and selected actuator with Danfoss. [S18]

Harmonic Filter

Documented series: Danfoss Advanced Active Filter AAF 007

Danfoss documents AAF 007 as an advanced active harmonic-filter family. [S6]

Voltage and current
The family lists 380–480 V AC and 35, 55, 100 and 150 A modules, with up to four 150 A modules in parallel. [S21]
Functions and efficiency
The page lists greater than 98% efficiency, harmonic mitigation, power-factor correction and imbalance compensation. [S22]
  • Danfoss Advanced Active Filter AAF 007 [S6]

Selection fit: Current and parallel capacity remain configuration scoped; the registered address is not asserted as a production plant. [S23]

Hydraulic Motor

Documented series: Industrial piston, vane and cam-lobe motors; mobile piston and low-speed high-torque motor routes.

Danfoss groups both industrial motors and mobile motors within its Power Solutions motor range. [S25]

  • Industrial piston, vane and cam-lobe motors; mobile piston and low-speed high-torque motor routes. [S7]
  • ViPak standard hydraulic power units, custom hydraulic power units and Vickers by Danfoss motor-pump routes, with related manifold blocks, valve stands and accumulator support. [S8]
  • H1P closed-circuit variable-displacement axial-piston pumps with published displacements from 45 to 280 cm³/rev. [S9]
  • PVG proportional valves, directional-control valves, cartridge valves, hydraulic integrated circuits, industrial valves and subsystem valves. Danfoss states that its cartridge portfolio contains more than 500 models from check valves to high-precision proportional valves. [S10]

Selection fit: Start by separating industrial from mobile duty, then select the published piston, vane, cam-lobe or low-speed high-torque route. Confirm circuit, torque, speed, displacement, mounting, controls, availability and lead time with Danfoss. [S26]

Medium Voltage Vfd

Documented series: Danfoss VACON 3000 medium-voltage drive

Danfoss documents VACON 3000 as a modular medium-voltage drive system. [S11]

Voltage and kVA
The page lists variable-torque ranges at 3,300 V and 4,160 V up to roughly 7 MVA. [S31]
Front-end options
It describes a 12-pulse diode-front-end baseline and an active-front-end option for regeneration and lower harmonics. [S32]
  • Danfoss VACON 3000 medium-voltage drive [S11]

Selection fit: Final cabinet, voltage, kVA, front end, transformer, cooling and enclosure require project-specific integration. [S33]

Safety Relief Valve

Documented series: SFA 10 item 148F4325 safety relief valve.

Danfoss documents SFA 10 item 148F4325 as a safety relief valve. [S35]

Published setting
The cited SFA 10 item lists a 25 bar pressure setting. [S36]
Published working pressure
The cited item lists 65 bar maximum working pressure. [S37]
  • SFA 10 item 148F4325 safety relief valve. [S35]

Selection fit: Start with SFA 10 item 148F4325 only if the cited 25 bar setting and 65 bar maximum working pressure fit the selected cooling duty. Confirm medium, approvals, connection and final configuration with Danfoss. [S38]

Soft Starter

Documented series: Danfoss VLT Soft Starter MCD 600

Danfoss documents MCD 600 as a named finished VLT soft-starter family. [S40]

Documented specifications for Soft Starter
Ingress protectionIP20 [S45]
Supply ranges
The family supports 200–525 V and 380–690 V three-phase supplies. [S41]
Current and bypass
Nominal current spans 20–129 A in IP20 versions and 144–1250 A in IP00 versions, with an integrated bypass contactor. [S42]
  • Danfoss VLT Soft Starter MCD 600 [S40]

Selection fit: Supply, current, enclosure, communication card, pump functions and protection depend on the exact MCD 600 variant. [S43]

Solenoid Coil

Documented series: Danfoss HVACR solenoid coil family.

Danfoss documents a family of HVACR solenoid coils for matching valve-and-coil combinations. [S46]

Published selection route
Danfoss says these coils are normally ordered separately, allowing buyers to select a valve-and-coil combination. [S47]
Published handling
The cited North American clip-on coil family is attached without tools and removed with a standard screwdriver. [S48]
  • Danfoss HVACR solenoid coil family. [S46]

Selection fit: Use this route to compare a Danfoss valve-and-coil combination, then confirm valve model, voltage, connector, duty and final configuration with Danfoss. [S49]

Solenoid Valve

Documented series: Industrial solenoid valves for fluid and non-flammable-gas control.

Danfoss documents industrial solenoid valves for controlling fluids and non-flammable gases. [S51]

Published valve types
Direct-operated, servo-operated and assisted-lift versions are listed for this industrial family. [S53]
Published supply route
Bodies and coils are normally supplied separately, while complete valve units are also available. [S54]
  • Industrial solenoid valves for fluid and non-flammable-gas control. [S52]

Selection fit: Use the cited family to compare direct, servo or assisted-lift control; confirm medium, body, coil and final assembly before purchase. [S55]

Vfd

Documented series: Danfoss VLT AutomationDrive FC 301/302

Danfoss documents FC 301/302 as a VLT variable-frequency-drive family. [S57]

Documented specifications for Vfd
Ingress protectionIP00 [S62]
Motor and power scope
The family controls variable-speed asynchronous and permanent-magnet motors, with high-overload ranges from 0.25 kW upward across listed voltage classes. [S58]
Safety function
The retained page documents Safe Stop and Safe Torque Off functions. [S59]
  • Danfoss VLT AutomationDrive FC 301/302 [S57]

Selection fit: Voltage, overload class, power, enclosure and safety options remain model-specific. [S60]

Product range and documented series

Danfoss documents the LENO MSV-BD DN 20 internal-thread manual balancing valve within its static-balancing route. [S12]

  • LENO MSV-BD DN 20 internal-thread manual balancing valve, product 003Z4002, with G 3/4 connection and PN 20 pressure class. [S4]Source note: MSV-BD DN 20, Internal thread, manual balancing valve; G ¾; Pressure class PN 20
  • Danfoss GBC M motorised shut-off ball valves with MQT electric actuator. [S5]Source note: GBC M; MQT; motorised shut-off ball valve
  • Danfoss Advanced Active Filter AAF 007 [S6]Source note: Danfoss Advanced Active Filter AAF 007
  • Industrial piston, vane and cam-lobe motors; mobile piston and low-speed high-torque motor routes. [S7]Source note: Industrial piston motors; Industrial vane motors; ICMB Industrial cam lobe motor; Mobile piston motors; Low-speed high-torque motors
  • ViPak standard hydraulic power units, custom hydraulic power units and Vickers by Danfoss motor-pump routes, with related manifold blocks, valve stands and accumulator support. [S8]Source note: Standard hydraulic power units ViPak; Custom hydraulic power units; Hydraulic motor pumps
  • H1P closed-circuit variable-displacement axial-piston pumps with published displacements from 45 to 280 cm³/rev. [S9]Source note: closed circuit variable displacement axial piston pumps; 45 to 280 cm³ per round
  • PVG proportional valves, directional-control valves, cartridge valves, hydraulic integrated circuits, industrial valves and subsystem valves. Danfoss states that its cartridge portfolio contains more than 500 models from check valves to high-precision proportional valves. [S10]Source note: PVG proportional valves; DCV directional control valves; ICS cartridge valves; HICs; over 500 models ... from simple check valves to high-precision proportional valves
  • Danfoss VACON 3000 medium-voltage drive [S11]Source note: Danfoss VACON 3000 medium-voltage drive

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Danfoss remains an existing canonical profile. This additional membership is limited to the LENO MSV-BD product route and its page-bound image; revenue, certification, stock, service and delivery claims were not asserted. [S14]Company-stated
  • Danfoss legal identity and Nordborg context are retained from its general-information page. GBC M line facts and its page-bound product image are scoped only to the cited refrigeration valve route. Revenue, certification, stock, delivery and service claims were not asserted. [S19]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to Danfoss Advanced Active Filter AAF 007; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S24]Company-stated
  • Corporate identity and Nordborg location are retained from Danfoss's official history. Hydraulic Motor, Hydraulic Power Unit, Hydraulic Pump and Hydraulic Valve category routes are retained from official product pages. Revenue, certifications, availability and delivery claims were not asserted. [S30]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to Danfoss VACON 3000 medium-voltage drive; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S34]Company-stated
  • Danfoss corporate context is retained from its official general-information page. SFA 10 item 148F4325 facts and the page-bound image are scoped only to the cited safety-relief route. Revenue, certification, capacity, stock, delivery and service claims were not asserted. [S39]Company-stated

Frequently asked questions

What Balancing Valve product is documented for Danfoss?

The retained product material names LENO MSV-BD DN 20 internal-thread manual balancing valve, product 003Z4002, with G 3/4 connection and PN 20 pressure class. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications, Availability or stock, Production capacity. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S14][S39]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.