Procurement directory

Knife Gate Valve Manufacturers

Compare the documented product facts shown for each cited route before opening a dossier. A missing dimension remains absent rather than being inferred from a related series.

Coverage
9 canonical company dossiers
Compare here
Product range, product facts and selection scope
Evidence basis
Official product routes retained per category

Source-bound comparison

Compare documented product facts

Each cell repeats only the product facts retained for that company’s category evidence. Open the dossier for the source note and evidence boundary.

ManufacturerRetained product facts
AVK International A/S
  • Published product factAVK Series 779/91 uni-directional wafer-type knife gate valve, PN 10, with cast-iron body, stainless-steel blade, PTFE packing and EPDM seal
  • Published product factAVK centric double-flanged butterfly valve, PN 10/16, with short fixed NBR liner and duplex disc
Stafsjö Valves AB
  • Published product factStafsjö knife gate valves from DN 50 (2 inches) to DN 1800 (72 inches), including HG, HL, HP, HPT, HX, MV, RKO, SLV, SLF, SLH/SLX and WB series
DeZURIK, Inc.
  • Published product factDeZURIK knife gate valve lines including KGC-ES, KGC-BD, KGC-MD, KGC-MC, KGN-RSB/KGN-MSU, KGI, KSV, KUL and KSL
  • Published product factDeZURIK BHP high-performance, BAW AWWA, BOS-US resilient-seated, BOS-CL on-center resilient-seated and BTG tail-gas butterfly valve families
Red Valve Company, Inc.
  • Published product factRed Valve KFD Series D Flexgate manual and actuated knife gate valves, plus KDX Series DX knife gate valves
  • Published product factRed Valve PCV Series 5200 pneumatic-actuated control pinch valves in 1 to 4 inch sizes
Bray International, Inc.
Metso
KSB SE & Co. KGaA
Flowserve Corporation
VAG GmbH
  • Published product factVAG ZETA resilient-seated, fully flanged knife gate valve with hand lever, PN 10 and DN 50 to 150
  • Published product factVAG EKN double-offset butterfly-valve platform, including H-, M- and B-series

  1. AVK International A/S

    Category evidenceAVK supplies valves, hydrants and accessories for water and gas distribution, wastewater treatment and fire protection.

    Published product fact
    AVK Series 779/91 uni-directional wafer-type knife gate valve, PN 10, with cast-iron body, stainless-steel blade, PTFE packing and EPDM seal
    Published product fact
    AVK centric double-flanged butterfly valve, PN 10/16, with short fixed NBR liner and duplex disc

    LocationGalten, Denmark

    Official product evidence

  2. Stafsjö Valves AB

    Category evidenceStafsjö develops and manufactures high-performance knife gate valves for demanding industrial processes.

    Published product fact
    Stafsjö knife gate valves from DN 50 (2 inches) to DN 1800 (72 inches), including HG, HL, HP, HPT, HX, MV, RKO, SLV, SLF, SLH/SLX and WB series

    LocationStavsjö, Sweden

    Official product evidence

  3. DeZURIK, Inc.

    Category evidenceDeZURIK manufactures valves for water treatment, sewage treatment, water distribution, pulp and paper, mining, power and other process industries.

    Published product fact
    DeZURIK knife gate valve lines including KGC-ES, KGC-BD, KGC-MD, KGC-MC, KGN-RSB/KGN-MSU, KGI, KSV, KUL and KSL
    Published product fact
    DeZURIK BHP high-performance, BAW AWWA, BOS-US resilient-seated, BOS-CL on-center resilient-seated and BTG tail-gas butterfly valve families

    LocationSartell, Minnesota, United States

    Official product evidence

  4. Red Valve Company, Inc.

    Category evidenceRed Valve supplies flow-control products for municipal and industrial applications, including a knife gate valve range for slurry handling.

    Published product fact
    Red Valve KFD Series D Flexgate manual and actuated knife gate valves, plus KDX Series DX knife gate valves
    Published product fact
    Red Valve PCV Series 5200 pneumatic-actuated control pinch valves in 1 to 4 inch sizes

    LocationPittsburgh, Pennsylvania, United States

    Official product evidence

  5. Flow-Tek Series 5000/6000 three-piece ball valve

    Bray International, Inc.

    Category evidenceBray manufactures flow-control and automation products, including an industrial ball-valve portfolio.

    LocationHouston, Texas, United States

  6. Metso

    Category evidenceMetso - Partner for positive change - Metso Skip to main content

    LocationFinland

  7. KSB has the right pump for every challenge

    KSB SE & Co. KGaA

    Category evidenceKSB - leading supplier of pumps, valves and services

    LocationFrankenthal, Germany

  8. Flowserve company overview

    Flowserve Corporation

    Category evidenceFlowserve's Flow Control Division designs, manufactures and distributes engineered-to-order and configured-to-order isolation valves, control valves, valve automation products and related services.

    LocationIrving, Texas, United States

  9. VAG GmbH

    Category evidenceVAG is a valve manufacturer providing water, wastewater and water-control solutions.

    Published product fact
    VAG ZETA resilient-seated, fully flanged knife gate valve with hand lever, PN 10 and DN 50 to 150
    Published product fact
    VAG EKN double-offset butterfly-valve platform, including H-, M- and B-series

    LocationMannheim, Germany

    Official product evidence

Return to the Knife Gate Valve encyclopedia guide