Manufacturer profile

KSB SE & Co. KGaA

KSB SE & Co. KGaA is a manufacturer based in Frankenthal, Germany. [S2][S1]

Country
Germany [S1]
City
Frankenthal [S2]
Website
ksb.com
KSB has the right pump for every challenge
Official product image [S31]

Evidence scope

The retained official product route documents: KSB's official company overview presents a pump and valve portfolio under the KSB legal entity. This dossier uses that cited route as the editorial scope. [S12]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S14]

Centrifugal Pump

Documented series: KSB pump types including Etanorm single-stage volute pumps and multi-stage pump routes shown in its official pump catalogue.

KSB's official company overview presents a pump and valve portfolio under the KSB legal entity. [S12]

Documented specifications for Centrifugal Pump
Pressure rating8 bar [S15]
Materialcast iron [S16]
Flow rate4.4 to 160 m³/h [S17]
  • KSB pump types including Etanorm single-stage volute pumps and multi-stage pump routes shown in its official pump catalogue. [S4]
  • KSB Movitec ring-section pump configurations listed in KSB's official product catalogue. [S5]

Selection fit: Use KSB's pump-type catalogue to start by separating the required pump architecture, then confirm duty point, liquid, materials, seals, standards, availability and lead time directly with KSB. [S13]

Globe Valve

Documented series: KSB globe valves, including BOA-Compact, ECOLINE GLB 800 and NORI 40 ZXLBV/ZXSBV

KSB is a Germany-founded, globally active pump and valve manufacturer with a globe-valve product range for industrial applications. [S18]

Documented specifications for Globe Valve
Materialcast iron [S29]
Pressure rating25 bar [S30]
  • KSB globe valves, including BOA-Compact, ECOLINE GLB 800 and NORI 40 ZXLBV/ZXSBV [S6]
  • KSB wedge gate valves, including EF2A, Z05A and Z14A series [S7]
  • KSB HERA-BD bi-directional knife gate valve with a wafer-type single- or two-piece nodular-cast-iron body, PN 10 and up to DN 1200 [S8]
  • KSB butterfly valves with selectable body types, elastomers and automation options [S9]
  • KSB BOA-R spring-loaded lift check valves with flanged DIN/EN ends [S10]
  • KSB DIN/EN and ANSI/ASME control valves, butterfly and centred-disc designs, 2-way/3-way valves, high-temperature, cryogenic, high-pressure globe and microflow valves [S11]
  • KSB Actuatech pneumatic scotch-yoke actuators for butterfly and ball valves [S19]
  • KSB control-valve programme with matching electric actuators [S20]

Selection fit: KSB states that its globe valves are used for water and other fluids in heating systems, industrial plants and power stations, and describes them as suitable for insulation and maintenance-free. Confirm the selected valve, standards, availability and lead time directly with KSB. [S21]

Product range and documented series

KSB's official company overview presents a pump and valve portfolio under the KSB legal entity. [S12]

  • KSB pump types including Etanorm single-stage volute pumps and multi-stage pump routes shown in its official pump catalogue. [S4]Source note: Pumps; Etanorm; single-stage; multi-stage
  • KSB Movitec ring-section pump configurations listed in KSB's official product catalogue. [S5]Source note: Movitec; Ring-section pump
  • KSB globe valves, including BOA-Compact, ECOLINE GLB 800 and NORI 40 ZXLBV/ZXSBV [S6]Source note: Our top-selling globe valves: BOA-Compact; ECOLINE GLB 800; NORI 40 ZXLBV/ZXSBV.
  • KSB wedge gate valves, including EF2A, Z05A and Z14A series [S7]Source note: Our top-selling wedge gate valves and knife gate valves. EF2A. Z05A. Z14A.
  • KSB HERA-BD bi-directional knife gate valve with a wafer-type single- or two-piece nodular-cast-iron body, PN 10 and up to DN 1200 [S8]Source note: Knife gate valve to DIN/EN with wafer-type single-piece or two-piece body made of nodular cast iron, bi-directional. Nominal pressure PN 10. Max. nominal size DN 1200.
  • KSB butterfly valves with selectable body types, elastomers and automation options [S9]Source note: KSB offers a broad portfolio of butterfly valves. Body types and elastomers by KSB, matching your requirements. Easy to automate thanks to variable actuators.
  • KSB BOA-R spring-loaded lift check valves with flanged DIN/EN ends [S10]Source note: Lift check valve to DIN/EN with flanged ends, spring-loaded valve disc, maintenance-free.
  • KSB DIN/EN and ANSI/ASME control valves, butterfly and centred-disc designs, 2-way/3-way valves, high-temperature, cryogenic, high-pressure globe and microflow valves [S11]Source note: KSB’s programme includes control valves to DIN/EN and ANSI/ASME, butterfly control valves and centred-disc butterfly valves, 2-way and 3-way combining and diverting control valves, high-temperature or cryogenic valves, high-pressure globe valves, microflow valves, and matching actuators.

Procurement fit

For centrifugal pumps, the documented approach is to start from the KSB pump-type catalogue and separate the required pump architecture, then confirm duty point, liquid, materials, seals, standards, availability and lead time directly with KSB. Where a ring-section multistage-pump comparison is needed, the Movitec route is documented as the entry point, with duty point, liquid, materials, seals, motor, standards, availability and lead time again confirmed directly with the manufacturer. For globe valves, KSB states that the selected valve, standards, availability and lead time should be confirmed directly with KSB.

Technical capabilities

Centrifugal pump data references EN 50347 as the cited standard. The catalogue presents Etanorm single-stage volute pumps together with multi-stage routes including Movitec for ring-section multistage comparisons. Globe valve data is documented for the BOA-Compact, ECOLINE GLB 800 and NORI 40 ZXLBV/ZXSBV series. Documented parameters include cast iron as the material, a supply length of 4000 mm, a service temperature of 200 °C, an efficiency class of IE5, a power range of 0.55 to 7.5 kW and ingress protection IP 68.

Markets and applications

KSB states that its globe valves are applied with water and other fluids in heating systems, industrial plants and power stations, and describes them as suitable for insulation and maintenance-free. Gate valves, referenced within the same product data, are stated for use with water, steam, gas, oil and other non-aggressive fluids in power stations and process engineering. For centrifugal pumps, application coverage is documented at series level rather than as consolidated market text and should be confirmed with the manufacturer for each selection.

Evidence limitations

Several commonly requested procurement fields are not publicly documented in the source material reviewed for this profile. Production capacity, lead times by series, regional availability, authorised distributor coverage and installed-base references are not publicly documented. Quality management certifications, material test certificates, factory acceptance test scope and country-of-origin statements beyond Frankenthal, Germany are not publicly documented. Pricing bands, minimum order quantities and warranty terms for Etanorm, Movitec, BOA-Compact, ECOLINE GLB 800 and NORI 40 ZXLBV/ZXSBV are not publicly documented.

Editorial summary

KSB SE & Co. KGaA is a German manufacturer headquartered in Frankenthal, documented in this directory under two product categories: centrifugal pump and globe valve. The centrifugal pump range is presented through the KSB pump-type catalogue, which includes Etanorm single-stage volute pumps and multi-stage pump routes. The globe valve range is represented by named series including BOA-Compact, ECOLINE GLB 800 and NORI 40 ZXLBV/ZXSBV. Specifications and ordering data covered in this profile are drawn from publicly available catalogue information as cited under each category.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Corporate identity and headquarters are retained from KSB's official company overview. Centrifugal-pump portfolio evidence is retained from its official pump-type catalogue. Revenue, certification, availability and delivery claims were not asserted. [S14]Company-stated
  • Corporate identity, location context and company overview are retained from KSB's official company page. Globe-, gate-, knife-gate-, butterfly-, check-, control-valve, pneumatic-valve-actuator and electric-actuator range and application context are retained from the respective official KSB product pages. [S28]Company-stated

Frequently asked questions

What Centrifugal Pump product is documented for KSB SE & Co. KGaA?

The retained product material names KSB pump types including Etanorm single-stage volute pumps and multi-stage pump routes shown in its official pump catalogue. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S14]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.