Procurement directory
Needle Valve Manufacturers
Compare the documented product facts shown for each cited route before opening a dossier. A missing dimension remains absent rather than being inferred from a related series.
- Coverage
- 10 canonical company dossiers
- Compare here
- Product range, product facts and selection scope
- Evidence basis
- Official product routes retained per category
Source-bound comparison
Compare documented product facts
Each cell repeats only the product facts retained for that company’s category evidence. Open the dossier for the source note and evidence boundary.
| Manufacturer | Pressure rating | Standard | Service temperature | Material |
|---|---|---|---|---|
| Armaturenfabrik Franz Schneider GmbH + Co. KG | 400 bar | EN 12266-1 | 200°C | Stainless Steel |
| BMT Co., Ltd. | 413 bar | — | 232°C | stainless steel |
| Fujikin Incorporated | 99.9MPa | — | — | — |
| High Pressure Equipment Company | 150,000 psi | — | — | stainless steel |
| Hy-Lok Corporation | 69bar | — | — | — |
| NIPPON VALVE CONTROLS, INC. | 4.0MPa | — | 150℃ | Stainless steel |
| Oliver Valves | 413bar | — | — | — |
| SSP | 413 bar | — | 648° C | stainless steel |
| Swagelok Company | — | — | — | — |
| VICI Valco Instruments Co. Inc. | 1000 psi | — | 100°C | aluminum |
-
Armaturenfabrik Franz Schneider GmbH + Co. KG
Documented seriesAS-Schneider integral-bonnet needle-type globe valves, represented by Type S338.
- Stem and seat design
- The cited S338 route specifies an internal stem thread, integral seat and non-rotating needle.
- Published envelope
- The S338 route lists a 6 mm bore and 400 bar / 5,801 psi standard pressure.
- Selection scope
- Start with Type S338 when an integral-bonnet needle valve with the cited 6 mm bore and 400 bar standard-pressure point fits the duty. Confirm the selected material, temperature and configuration with AS-Schneider.
-
BMT Co., Ltd.
Documented seriesBMT SUPERLOK Integral Bonnet Needle Valves.
- Published pressure point
- The cited integral-bonnet range is specified to 6,000 psig / 413 bar at 100 °F.
- Published options
- The range names stainless-steel, brass and Monel material options, with PTFE and graphite temperature variants.
- Selection scope
- Start with BMT SUPERLOK Integral Bonnet Needle Valves when the cited pressure point and published material/packing variants suit the duty. Confirm medium, temperature, selected alloy and final configuration with BMT.
-
Fujikin Incorporated
Documented seriesFujikin DS-31 manual angle-type needle valves.
- Published construction
- The cited DS-31 route specifies brass C3771B and screw connections.
- Published envelope
- The DS-31 route states 1 MPa maximum pressure and -20 to 80 °C operating temperature.
- Selection scope
- Start with DS-31 when a brass, screw-connected manual angle needle valve within the cited 1 MPa and -20 to 80 °C envelope fits the duty. Confirm medium and final configuration with Fujikin.
-
High Pressure Equipment Company
Documented seriesHigh Pressure Equipment Company Taper Seal needle valves.
- Published pressure family
- The cited Taper Seal line covers 10,000 and 15,000 psi service.
- Construction and tubing
- The cited route lists nonrotating-stem designs, 316 stainless-steel bodies, 17-4PH stems and 1/16 through 3/8 in OD compression tubing sizes.
- Selection scope
- Start with Taper Seal needle valves when the cited pressure family, nonrotating-stem design and compression-tubing sizes suit the system. Confirm selected pressure, material, tubing and final configuration with High Pressure Equipment Company.
-
Hy-Lok Corporation
Documented seriesHy-Lok NV and SV Series needle valves.
- Published material choices
- The cited NV/SV route lists stainless steel, brass, Alloy 400 and A105 options in inline or angle patterns.
- Published envelope
- The NV/SV page lists 6,000 psig / 413 bar at 100 °F maximum operating pressure and -65 to 600 °F operating temperature.
- Selection scope
- Start with NV or SV when the cited pattern, material options and published operating envelope fit the duty. Confirm medium, pressure, temperature, end connection and final configuration with Hy-Lok.
-
NIPPON VALVE CONTROLS, INC.
Documented seriesNIPPON VALVE CONTROLS NS, NH and NP needle-valve series.
- NS series
- The cited NS threaded-end series lists 4.0 MPa maximum allowable pressure.
- NH series
- The cited NH threaded-end series lists 14.0 MPa maximum allowable pressure, alongside the wafer-type NP series.
- Selection scope
- Start with NS, NH or NP only after matching the published pressure point and end style to the duty. Confirm selected series, material, medium and final configuration with NIPPON VALVE CONTROLS.
-
Oliver Valves
Documented seriesOliver Compression BI Type single-isolating needle valves.
- Shutoff and stem
- The Compression BI page describes bubble-tight shutoff, a non-rotating anti-galling tip and a dynamic self-adjusting spindle seal.
- Published pressure options
- The cited product page lists a 413 bar / 6,000 psi standard rating with a 689 bar / 10,000 psi option.
- Selection scope
- Start with the Compression BI Type when its single-isolating function, cited shutoff/stem design and published pressure options suit the duty. Confirm material, temperature and final pressure rating with Oliver Valves.
-
SSP
Documented seriesSSP 100 and 600 Series integral-bonnet needle valves.
- Construction
- The cited range describes live-loaded PTFE/PEEK chevron packing and straight or angle patterns.
- Published envelope
- The cited 100/600 integral-bonnet models list MAWP to 6,000 psig and a -40 to 600 °F range.
- Selection scope
- Start with SSP 100 or 600 Series when an integral-bonnet needle valve with the cited packing, pattern and operating envelope fits the duty. Confirm medium, fitting, packing and final configuration with SSP.
-
Swagelok Company
Documented seriesSwagelok GU and F10 general-utility needle valves.
- Valve pattern
- The cited GU/F10 route describes a hardened stainless-steel nonrotating needle in straight and angle patterns.
- Published envelope
- The range supports pressures up to 6,000 psig, with temperature limits differentiated by PTFE or Grafoil packing.
- Selection scope
- Start with GU or F10 when a straight or angle general-utility needle valve with the cited pressure range suits the system. Confirm packing, temperature, medium, fittings and final configuration with Swagelok.
-
VICI Valco Instruments Co. Inc.
Documented seriesVICI micrometering needle valves.
- Application format
- The cited valves combine zero-dead-volume fittings with bulkhead mounting for low-internal-volume gas control.
- Published envelope
- The cited source lists 1,000 psi maximum gas service and operation to 315 °C, with individual mass-spectrometer leak testing.
- Selection scope
- Start with VICI micrometering needle valves when low-internal-volume gas control, zero-dead-volume fittings and bulkhead mounting suit the system. Confirm gas, material, fittings, pressure and final configuration with VICI.