Procurement directory

Pressure Reducing Valve Manufacturers

Compare the documented product facts shown for each cited route before opening a dossier. A missing dimension remains absent rather than being inferred from a related series.

Coverage
10 canonical company dossiers
Compare here
Product range, product facts and selection scope
Evidence basis
Official product routes retained per category

Source-bound comparison

Compare documented product facts

Each cell repeats only the product facts retained for that company’s category evidence. Open the dossier for the source note and evidence boundary.

ManufacturerPressure ratingFlow rateMaterial
Caleffi S.p.A. 90 psi 7.3 gpm
Cla-Val Company Aluminum
Emerson Electric Co.
GIACOMINI S.p.A. 400 PSI
HydraForce, Inc. 427bar 0 to 50 gpm
Spirax Sarco, Inc.
Taco Comfort Solutions 50 PSI stainless steel
TLV Co., Ltd. 0.01 MPa stainless steel
Yoshitake Inc. cast iron
Zurn Water, LLC 100 psi stainless steel
  1. Balancing valve for hydraulic systems.

    Caleffi S.p.A.

    Documented seriesPresCal 535340HA NPT pressure reducing valve.

    Documented model
    PresCal 535340HA pressure reducing valve with NPT connections.
    Published category
    The cited route is classified within pressure reducing valves.
    Selection scope
    Start with PresCal 535340HA only when the cited NPT pressure-reducing-valve configuration matches the line. Confirm size, medium, pressure, temperature and final configuration with Caleffi.

    LocationFontaneto d'Agogna, Italy

    Official product evidence

  2. 90-01 & 690-01; Pressure Reducing Valve

    Cla-Val Company

    Documented seriesCla-Val 90-01 full-port and 690-01 reduced-port pressure reducing valves.

    Documented port variants
    The cited route identifies 90-01 as full port and 690-01 as reduced port.
    Published control principle
    The cited route describes an accurate pilot-operated regulator holding downstream pressure to a pre-determined limit.
    Selection scope
    Start with 90-01 or 690-01 when the cited pilot-operated downstream-pressure duty and port style fit the system. Confirm body, pilot, connections, media and final configuration with Cla-Val.

    LocationCosta Mesa, California, United States

    Official product evidence

  3. Fisher V270 full-bore ball control valve

    Emerson Electric Co.

    Documented seriesFisher 627 Series Commercial / Industrial pressure reducing regulators.

    Documented system scope
    The cited Fisher 627 Series route covers low- and high-pressure systems.
    Published media
    The cited product route lists natural gas, air and other gases depending on construction.
    Selection scope
    Start with Fisher 627 Series when the cited direct-operated regulator, pressure-system and gas-service scope fits. Confirm construction, pressure range, gas, approvals and final configuration with Emerson.

    LocationSt. Louis, Missouri, United States

    Official product evidence

  4. R206B Static balancing valve

    GIACOMINI S.p.A.

    Documented seriesA202 field-adjustable pressure reducing valve.

    Documented use context
    The cited A202 route describes zone control for sprinkler, standpipe and combined fire-protection systems.
    Published rated pressure
    The cited A202 route lists a 400 PSI rated pressure.
    Selection scope
    Start with A202 when its cited adjustable zone-control role, fire-protection context and 400 PSI rating fit. Confirm applicable code, size, connections and final configuration with Giacomini.

    LocationSan Maurizio d'Agogna, Italy

    Official product evidence

  5. HydraForce, Inc.

    Documented seriesER10-S30 screw-in pressure-reducing cartridge logic element.

    Documented construction
    The cited ER10-S30 is a screw-in, cartridge-style, spool-type, spring-biased pressure-reducing logic element.
    Published operating context
    The cited element is described for use with a pilot relief valve connected to port 3.
    Selection scope
    Start with ER10-S30 when its cited screw-in cartridge, spool-type, pilot-relief-valve circuit role fits. Confirm cavity, pilot, hydraulic fluid, pressure limits and final circuit design with HydraForce.

    LocationLincolnshire, United States

    Official product evidence

  6. SRV66 Sanitary Pressure Reducing Valve

    Spirax Sarco, Inc.

    Documented seriesSRV66 sanitary pressure reducing valve.

    Published construction
    The cited SRV66 route identifies a self-draining 316L stainless-steel sanitary pressure regulating valve.
    Published media
    The cited route lists steam, water and inert industrial gases.
    Selection scope
    Start with SRV66 when its cited sanitary, self-draining 316L construction and steam, water or inert-gas scope fit. Confirm size, pressure, connections, cleanability and final configuration with Spirax Sarco.

    LocationBlythewood, South Carolina, United States

    Official product evidence

  7. Accu-Flo Balancing Valves

    Taco Comfort Solutions

    Documented seriesTaco self-compensating Cartridge Style Pressure Reducing Valve.

    Documented construction
    The cited valve places its parts in a one-piece cartridge.
    Published service note
    The cited cartridge is described as removable and serviceable without reducing system pressure.
    Selection scope
    Start with Taco's cartridge-style route when the cited self-compensating, serviceable cartridge construction fits. Confirm size, medium, pressure and final configuration with Taco.

    LocationCranston, Rhode Island, United States

    Official product evidence

  8. COSPECT® Pressure Reducing Valves

    TLV Co., Ltd.

    Documented seriesCOSPECT process-steam pressure reducing valves: COS-3, COS-16 and COS-21.

    Documented models
    The cited COSPECT route names COS-3, COS-16 and COS-21.
    Published integrated components
    The cited COSPECT range is described with a built-in strainer, separator and steam trap.
    Selection scope
    Start with COSPECT when a process-steam pressure reducing valve with the cited integral strainer, separator and steam trap is under comparison. Confirm model, pressure, temperature, capacity and final configuration with TLV.

    LocationKakogawa, Hyogo, Japan

    Official product evidence

  9. GD-26G

    Yoshitake Inc.

    Documented seriesGD-26G pressure reducing valve and drain separator.

    Documented product type
    The cited GD-26G route lists a pilot-operated product type.
    Published pressure range
    The cited GD-26G route lists maximum inlet pressure of 1.0 MPa and reduced pressure of 0.05 to 0.7 MPa.
    Selection scope
    Start with GD-26G when the cited pressure-reducing and drain-separator configuration plus published pressure range fit. Confirm fluid, nominal size, connections, temperature and final setting with Yoshitake.

    LocationNagoya, Japan

    Official product evidence

  10. Wilkins 500XL3 Pressure Reducing Valve

    Zurn Water, LLC

    Documented seriesWilkins 500XL3 high-flow commercial pressure reducing valve.

    Published use context
    The cited route describes 500XL3 for commercial and industrial water distribution environments.
    Published material detail
    The cited product description lists an all-bronze body, stainless-steel stem and cartridge internals.
    Selection scope
    Start with 500XL3 when the cited commercial or industrial water-distribution context and high-flow route fit. Confirm size, pressure range, water chemistry and final configuration with Zurn.

    LocationMilwaukee, Wisconsin, United States

    Official product evidence

Return to the Pressure Reducing Valve encyclopedia guide