Manufacturer profile

Emerson Electric Co.

Emerson Electric Co. is a manufacturer based in St. Louis, Missouri, United States. [S2][S1]

Country
United States [S1]
City
St. Louis, Missouri [S2]
Annual sales
US$18.016 billion net sales (FY 2025) [S3]
Fisher V270 full-bore ball control valve
Official product image [S39]

Evidence scope

The retained official product route documents: Emerson's final-control portfolio includes industrial ball valves configured for isolation and control applications. This dossier uses that cited route as the editorial scope. [S13]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S26]

Ball Valve

Documented series: Industrial ball valves: full- and reduced-bore standard and customized designs, including soft-seated and metal-seated options

Emerson's final-control portfolio includes industrial ball valves configured for isolation and control applications. [S13]

Documented specifications for Ball Valve
MaterialStainless Steel [S27]
  • Industrial ball valves: full- and reduced-bore standard and customized designs, including soft-seated and metal-seated options [S5]
  • Fisher V270 full-bore ball control valve [S6]
  • Emerson Final Control globe valves, including shutoff globe valves [S7]
  • Emerson Final Control gate valves for general-purpose, high-pressure and high-temperature applications [S8]
  • Clarkson knife gate valves for light- to heavy-slurry service, including KS1, KS3, KGA+, KGD and SU10R families [S9]
  • Emerson high-performance butterfly valves for on-off and isolation applications, including Fisher 8590 and Keystone K-LOK designs [S10]
  • Emerson specialty check valves, including compact wafer, swing, spring-loaded swing and dual-plate wafer designs [S11]
  • Fisher GX globe control valve and actuator system, including a three-way construction [S12]
  • Fisher 1061 pneumatic piston rotary actuators for Vee-Ball, eccentric-disk and butterfly valves [S14]
  • Bettis electric actuators for multi-turn, quarter-turn and linear valve motion [S15]
  • Spence ES-150, ES-300 and ES-600 steam and air separators, including fabricated and custom-design options [S16]

Selection fit: The company states that these configured valves address industrial process applications, including severe conditions, elevated temperatures and cryogenic service. Confirm final configuration, standards, availability and lead time directly with Emerson. [S17]

Pressure Reducing Valve

Documented series: Fisher 627 Series Commercial / Industrial pressure reducing regulators.

Emerson documents Fisher 627 Series as direct-operated pressure reducing regulators. [S28]

Documented system scope
The cited Fisher 627 Series route covers low- and high-pressure systems. [S30]
Published media
The cited product route lists natural gas, air and other gases depending on construction. [S31]
  • Fisher 627 Series Commercial / Industrial pressure reducing regulators. [S29]

Selection fit: Start with Fisher 627 Series when the cited direct-operated regulator, pressure-system and gas-service scope fits. Confirm construction, pressure range, gas, approvals and final configuration with Emerson. [S32]

Safety Relief Valve

Documented series: Crosby Style JCE safety relief valves.

Emerson documents the Crosby Style JCE Safety Relief Valve. [S34]

Documented design
The cited JCE route describes full-lift construction for maximum discharge capability. [S35]
Published test note
The cited route says each JCE valve is individually tested and set. [S36]
  • Crosby Style JCE safety relief valves. [S34]

Selection fit: Use the Crosby Style JCE route as a process-system safety-relief shortlist only after confirming code, set pressure, fluid, capacity and final configuration with Emerson. [S37]

Product range and documented series

Emerson's final-control portfolio includes industrial ball valves configured for isolation and control applications. [S13]

  • Industrial ball valves: full- and reduced-bore standard and customized designs, including soft-seated and metal-seated options [S5]Source note: Emerson's ball valve portfolio includes a diverse range of standard and customized valves. There are soft seated designs and metal-seated valves.
  • Fisher V270 full-bore ball control valve [S6]Source note: Fisher V270 Full-Bore Ball Control Valve.
  • Emerson Final Control globe valves, including shutoff globe valves [S7]Source note: Globe Valve Products. Shutoff Globe Valves.
  • Emerson Final Control gate valves for general-purpose, high-pressure and high-temperature applications [S8]Source note: Gate valves are designed to shut off flow in general purpose, high pressure, and high temperature applications.
  • Clarkson knife gate valves for light- to heavy-slurry service, including KS1, KS3, KGA+, KGD and SU10R families [S9]Source note: Clarkson Knife Gate Valves are trusted in erosive slurry applications. Clarkson KS1 Severe Service Knife Gate Valve. Clarkson KS3 Severe Service Knife Gate Valve. Clarkson KGA+ Heavy Slurry Knife Gate Valve. Clarkson Model KGD Slurry Knife Gate Valve. Clarkson SU10R Knife Gate Valve.
  • Emerson high-performance butterfly valves for on-off and isolation applications, including Fisher 8590 and Keystone K-LOK designs [S10]Source note: Fisher 8590 High Performance Butterfly Valve. Keystone K-LOK. Emerson’s high performance butterfly valves designed for on-off and isolation applications.
  • Emerson specialty check valves, including compact wafer, swing, spring-loaded swing and dual-plate wafer designs [S11]Source note: Emerson’s specialty check valves range includes models with a compact wafer style design ... swing type wafer check valves ... high capacity, spring loaded swing type wafer check valves ... dual plate, spring loaded, wafer style designs.
  • Fisher GX globe control valve and actuator system, including a three-way construction [S12]Source note: The Fisher GX globe valve and actuator system features a compact, durable, and simple design engineered for reliable, smooth flow control. A three-way construction is available.

Procurement fit

For ball valves, the documented scope includes industrial process applications covering severe conditions, elevated temperatures, and cryogenic service. Emerson instructs buyers to confirm final configuration, standards, availability, and lead time directly with the company. For Fisher 627 Series regulators, the recommended starting point applies when the direct-operated regulator, low- or high-pressure system, and natural gas, air, or other gas service fit the project; construction, pressure range, gas, approvals, and final configuration should be confirmed with Emerson. For Crosby Style JCE valves, the route is to be used as a process-system safety-relief shortlist only after code, set pressure, fluid, capacity, and final configuration are confirmed with Emerson.

Technical capabilities

The ball valve range is documented as offering both standard and customized designs, with soft-seated and metal-seated variants in cast iron construction. The Fisher 627 Series is documented as a direct-operated regulator for low- and high-pressure systems handling natural gas, air, and other gases depending on construction. The Crosby Style JCE safety relief valve is documented as full-lift construction intended for maximum discharge capability, with each valve individually tested and set per the published route. Specific pressure ratings, temperature limits, size ranges, end connections, and detailed standards compliance are not publicly documented in the cited sources.

Markets and applications

Documented applications for Emerson Electric Co. valves center on industrial process systems. Ball valves are stated to address severe conditions, elevated temperatures, and cryogenic service within industrial process lines. Fisher 627 Series pressure reducing regulators are documented for low- and high-pressure systems using natural gas, air, or other gases as construction permits. Crosby Style JCE safety relief valves are positioned for process-system overpressure protection. Specific industry verticals, named end users, regional market coverage beyond the United States, and application case histories are not publicly documented in the cited material.

Evidence limitations

Several standard procurement fields are not publicly documented in the cited Emerson sources. For the ball valve line, ASME or other standards body designations, exact pressure and temperature ratings, size ranges, end connections, certification listings such as PED or CRN, and lead times are not publicly documented. For the Fisher 627 Series, specific pressure range values, capacity figures, and approval listings are not publicly documented. For the Crosby Style JCE valve, set pressure ranges, orifice sizes, capacity tables, and code-stamp ratings are not publicly documented. Company history, revenue, employee count, and customer references are likewise not publicly documented.

Editorial summary

Emerson Electric Co., based in St. Louis, Missouri, United States, is documented in three industrial valve categories: ball valves, pressure reducing valves, and safety relief valves. The ball valve offering covers full- and reduced-bore industrial designs in cast iron, with soft-seated and metal-seated options. The pressure reducing line is represented by the Fisher 627 Series Commercial / Industrial pressure reducing regulators. The safety relief offering consists of Crosby Style JCE safety relief valves in stainless steel. This profile reflects only those product routes presently captured in the directory's documented record.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Production capacity [S33]
  • Certifications [S33]
  • Availability or stock [S33]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Corporate identity, headquarters and FY2025 net sales are retained from Emerson's official contact and 10-K pages. Ball-, globe-, gate-, knife-gate-, butterfly-, check-, control-valve, pneumatic-valve-actuator, electric-actuator and Spence steam-separator range and procurement fit are company-stated product evidence from official catalogues. [S26]Company-stated
  • Emerson company context is retained from its official imprint. Fisher 627 facts and the page-bound image are scoped only to the cited product route. Revenue, certification, capacity, stock, delivery and service claims were not asserted. [S33]Company-stated
  • Emerson corporate context is retained from its official imprint. Crosby Style JCE facts and the page-bound product image are scoped only to the cited safety-relief route. Revenue, certification, capacity, stock, delivery and service claims were not asserted. [S38]Company-stated

Frequently asked questions

What Ball Valve product is documented for Emerson Electric Co.?

The retained product material names Industrial ball valves: full- and reduced-bore standard and customized designs, including soft-seated and metal-seated options. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Production capacity, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S26][S33]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.