Manufacturer profile

GSR Ventiltechnik GmbH & Co. KG

GSR Ventiltechnik GmbH & Co. KG is a manufacturer based in Vlotho-Exter, Germany. [S2][S1]

Country
Germany [S1]
City
Vlotho-Exter [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Published connection
The cited Coil .182 card identifies a plug connection and 6.8 W DC value. [S4]
Published AC values
The cited Coil .182 card lists 14.5 VA and 10.5 VA AC values. [S5]
Magnetspule .182
Official product image [S17]

Evidence scope

The retained official product route documents: GSR documents standard solenoid coils, including Coil .182. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S9]

Solenoid Coil

Documented series: GSR Standard solenoid coils, including Coil .182.

GSR documents standard solenoid coils, including Coil .182. [S6]

Published connection
The cited Coil .182 card identifies a plug connection and 6.8 W DC value. [S4]
Published AC values
The cited Coil .182 card lists 14.5 VA and 10.5 VA AC values. [S5]
  • GSR Standard solenoid coils, including Coil .182. [S6]

Selection fit: Use the cited Coil .182 card only after matching the published connection and electrical values; confirm voltage, duty, valve interface and final configuration with GSR. [S8]

Solenoid Valve

Documented series: GSR solenoid valves for gaseous or liquid media switching.

GSR documents electromagnet-actuated solenoid valves that switch gaseous or liquid media. [S10]

Documented specifications for Solenoid Valve
Pressure rating1,200 bar [S15]
Service temperature+400 °C [S16]
Published Series 23 design
The pictured Series 23 is listed as a 2/2-way valve with a plate seal. [S11]
Published Series 23 envelope
The cited table lists DN15-DN100, 0-1.4 bar and cast-iron or cast-steel housing options for Series 23. [S12]
  • GSR solenoid valves for gaseous or liquid media switching. [S7]

Selection fit: Use the cited route to compare GSR solenoid-valve series, then confirm media, pressure, DN and housing material for the chosen series. [S13]

Product range and documented series

GSR documents standard solenoid coils, including Coil .182. [S6]

  • GSR Standard solenoid coils, including Coil .182. [S6]Source note: Standard solenoid coils; Coil .182
  • GSR solenoid valves for gaseous or liquid media switching. [S7]Source note: Solenoid valves

Procurement fit

For solenoid coils, the cited Coil .182 card is only to be used after matching the published plug connection and the listed 6.8 W DC or 14.5 VA and 10.5 VA AC electrical values to the target valve. Final configuration must be confirmed with GSR for voltage, duty, and valve interface. For solenoid valves, the cited route supports comparison between GSR series, with media, pressure, DN, and housing material confirmed prior to order release.

Technical capabilities

The Coil .182 card specifies a plug connection with a 6.8 W DC rating and AC variants at 14.5 VA and 10.5 VA. Series 23 is documented as a 2/2-way valve with a plate seal. Its published envelope covers DN15 to DN100, an operating pressure window of 0 to 1.4 bar, and housing options in cast iron or cast steel. Coil insulation class, IP rating, duty cycle designation, and material grades are not publicly documented.

Markets and applications

GSR solenoid valves are documented for switching of gaseous or liquid media, which places them in scope for general industrial fluid-handling circuits. The Series 23 plate-seal 2/2-way configuration, combined with the DN15 to DN100 size range and 0 to 1.4 bar pressure window, is suited to low-pressure gas, compressed air, water, and similar utility services. Named end-uses, target industries, and reference installations are not publicly documented.

Evidence limitations

Company founding year, employee count, annual revenue, quality or product certifications, and named customer references are not publicly documented within the cited facts. Coil insulation class, IP rating, duty cycle designation, ambient temperature limits, and electromagnetic compatibility data for Coil .182 are not publicly documented. Pressure-temperature ratings outside the 0 to 1.4 bar window, elastomer compound for the Series 23 plate seal, and detailed material grades for Series 23 housings are not publicly documented.

Editorial summary

GSR Ventiltechnik GmbH & Co. KG is documented in this directory under two categories: solenoid coils and solenoid valves. The company is located in Vlotho-Exter, Germany. The coil product range references GSR Standard solenoid coils, with the cited Coil .182 card offered as representative technical data. The solenoid valve range covers devices intended for switching of gaseous or liquid media, with the pictured Series 23 listed among the documented designs.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S9]
  • Production capacity [S9]
  • Certifications [S9]
  • Availability or stock [S9]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • GSR corporate context, Coil .182 facts and image are retained from its official Standard solenoid coils route. Claims remain scoped to the cited coil card; revenue, certifications, capacity, stock, delivery and service claims are not asserted. [S9]Company-stated
  • GSR identity, valve facts and image all come from the cited official solenoid-valve route. They are limited to the described overview and Series 23 row; commercial availability and unsupported corporate claims are not asserted. [S14]Company-stated

Frequently asked questions

What Solenoid Coils product is documented for GSR Ventiltechnik GmbH & Co. KG?

The retained product material names GSR Standard solenoid coils, including Coil .182. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published connection should a buyer compare?

The cited product material records: The cited Coil .182 card identifies a plug connection and 6.8 W DC value. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published ac values should a buyer compare?

The cited product material records: The cited Coil .182 card lists 14.5 VA and 10.5 VA AC values. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Production capacity, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S9]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.