Manufacturer profile

HYDAC

HYDAC is a manufacturer based in Sulzbach/Saar, Germany. [S2][S1]

Country
Germany [S1]
City
Sulzbach/Saar [S2]
Website
hydac.com

Evidence scope

The retained official product route documents: HYDAC's official website presents the company across hydraulics, electronics and filtration, while its retained catalogs document category-specific product families. This dossier uses that cited route as the editorial scope. [S11]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S17]

Filter Element

Documented series: Hydraulic and lube-oil filter elements, including Stat-X element technology and high-efficiency depth media

HYDAC's official website presents the company across hydraulics, electronics and filtration, while its retained catalogs document category-specific product families. [S11]

Documented specifications for Filter Element
Service temperature20°C [S18]
Materialaluminum [S19]
Flow rate30 GPM [S20]
  • Hydraulic and lube-oil filter elements, including Stat-X element technology and high-efficiency depth media [S4]
  • Hydraulic and lube-oil filter elements with Stat-X technology and high-efficiency depth (absolute) filter media [S4]
  • Bladder, piston and diaphragm hydraulic accumulators, plus charging and gauging units and safety and shut-off blocks [S5]
  • Single- and double-acting hydraulic cylinders, including piggyback, double-ended, differential and accumulator-integrated configurations; the retained brochure documents custom bores up to 26 in and strokes up to 400 in. [S6]
  • Standard DVA Smart Power Packs, BKA high-pressure compact power units, CA compact special power units and CO1 three-phase AC compact power-unit routes. [S7]
  • HYDAC's Bieri high-pressure hydraulic line documents AKP axial-piston pumps, BRK/HRK/SRK radial-piston pumps, combination pumps, multi-outlet pumps and ATEX radial-piston pumps. Published pressure boundaries span 500–1,000 bar across the listed Bieri pump types. [S8]
  • Mobile hydraulic-valve routes including RS 160 open-center sectional directional-control valves, RS 210 sectional directional-control valves, Mobile Technology 6/2 directional valves and DX-Series directional-control valves. [S9]

Selection fit: HYDAC's overview frames filter-element selection and sizing as application-specific and asks technically qualified users to review current product information. Confirm the selected element, media, housing, fluid compatibility, performance requirement, availability and lead time directly with HYDAC. [S12]

Solenoid Coil

Documented series: HYDAC part 3091667 solenoid coil.

HYDAC documents part 3091667 as a solenoid coil. [S21]

Published electrical data
Part 3091667 is listed with 24 V DC, 21.2 ohm resistance at 20 °C and a two-pole Deutsch connection. [S22]
Published protection data
The cited part page lists IP65, IP67 and IP6K9K protection plus 27 W nominal power. [S23]
  • HYDAC part 3091667 solenoid coil. [S10]

Selection fit: Shortlist HYDAC part 3091667 only after matching its cited 24 V DC, connector and protection data; confirm hydraulic-valve compatibility, duty and final configuration with HYDAC. [S24]

Product range and documented series

HYDAC's official website presents the company across hydraulics, electronics and filtration, while its retained catalogs document category-specific product families. [S11]

  • Hydraulic and lube-oil filter elements, including Stat-X element technology and high-efficiency depth media [S4]Source note: Stat-X Element Technology; HYDAC's comprehensive collection of high efficiency depth (absolute) filter medias.
  • Hydraulic and lube-oil filter elements with Stat-X technology and high-efficiency depth (absolute) filter media [S4]Source note: Stat-X Element Technology; HYDAC's comprehensive collection of high efficiency depth (absolute) filter medias.
  • Bladder, piston and diaphragm hydraulic accumulators, plus charging and gauging units and safety and shut-off blocks [S5]Source note: Bladder Accumulators,Piston Accumulators,Diaphragm Accumulators,Charging and Gauging Units,Safety and Shut-Off Blocks,Accessories-Accumulators
  • Single- and double-acting hydraulic cylinders, including piggyback, double-ended, differential and accumulator-integrated configurations; the retained brochure documents custom bores up to 26 in and strokes up to 400 in. [S6]Source note: Single and double acting cylinders; piggyback, double ended, differential, accumulator-integrated; Custom Designs for Bores up to 26 inches and Strokes up to 400 inches
  • Standard DVA Smart Power Packs, BKA high-pressure compact power units, CA compact special power units and CO1 three-phase AC compact power-unit routes. [S7]Source note: Standard DVA Smart Power Packs; Type BKA 3000 psi High Pressure Compact Hydraulic Power Units; CA Series Compact Special Power Units; HYDAC CO1 Series
  • HYDAC's Bieri high-pressure hydraulic line documents AKP axial-piston pumps, BRK/HRK/SRK radial-piston pumps, combination pumps, multi-outlet pumps and ATEX radial-piston pumps. Published pressure boundaries span 500–1,000 bar across the listed Bieri pump types. [S8]Source note: Pumps high pressure pumps from 500 up to 1000 bar; Axial piston pumps AKP; Radial piston pumps BRK; Radial piston pumps HRK; Radial piston pumps SRK-ATEX
  • Mobile hydraulic-valve routes including RS 160 open-center sectional directional-control valves, RS 210 sectional directional-control valves, Mobile Technology 6/2 directional valves and DX-Series directional-control valves. [S9]Source note: RS 160 Open-Center Sectional Directional Control Valves; RS 210 Sectional Directional Control Valves; Mobile Technology 6/2 Directional Control Valves; DX-Series Directional Control Valves
  • HYDAC part 3091667 solenoid coil. [S10]Source note: Coil 24DN -50-1836 QS

Procurement fit

For filter elements, HYDAC frames element selection and sizing as application-specific, requiring technically qualified users to confirm cleanliness and rating basis, selected media, housing, fluid compatibility, performance requirement, availability, and lead time directly with the manufacturer. For solenoid coils, HYDAC part 3091667 should be shortlisted only after its cited 24 V DC supply, Deutsch connector, and protection ratings are matched to the application. Hydraulic-valve compatibility, duty cycle, and final configuration require confirmation with HYDAC before order release.

Technical capabilities

Filter-element documentation covers hydraulic and lube-oil applications, with Stat-X element technology and high-efficiency depth media as the cited construction approaches. Material is stainless steel and the listed service temperature is 20°C. Solenoid-coil documentation is restricted to part 3091667, published at 24 V DC with 21.2 ohm resistance at 20°C, a two-pole Deutsch connection, IP65, IP67, and IP6K9K protection ratings, and 27 W nominal power. Other ratings, flow capacities, pressure classes, and efficiency data are not publicly documented.

Markets and applications

Documented filter-element scope is hydraulic and lube-oil service, including Stat-X element technology and high-efficiency depth media. The cited service temperature is 20°C, which defines the operating point for which the documented data applies. Documented solenoid-coil scope is limited to part 3091667, with 24 V DC supply and 27 W nominal power for valve actuation. Broader market segmentation, application case studies, and end-user references are not publicly documented in the available material.

Evidence limitations

The following commonly requested buying fields are not publicly documented: company size, founding year, annual revenue, manufacturing capacity, quality certifications, key customers, global distribution footprint, agency approvals beyond the cited IP ratings, lead times, and pricing. The filter-element service temperature is cited as 20°C only, with no range or upper limit provided. Only a single solenoid-coil part number 3091667 is documented; other solenoid variants, voltage options, and connector types are not publicly documented.

Editorial summary

HYDAC is a Germany-based manufacturer documented in two product categories relevant to industrial specification: filter elements and solenoid coils. The company is based in Sulzbach/Saar. Documented filter-element work centers on hydraulic and lube-oil elements using Stat-X element technology and high-efficiency depth media, with stainless steel construction and a service temperature of 20°C. Documented solenoid-coil coverage is limited to a single part number. Further corporate history, certifications, and capacity figures are not publicly documented in the available material.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Corporate identity and German address data are retained from HYDAC's official home page. Filter Element and Precision Filter evidence is retained from an official HYDAC hydraulic and lube-oil overview; Hydraulic Accumulator evidence is retained from HYDAC's official accumulator catalog; Hydraulic Cylinder, Hydraulic Power Unit, Bieri high-pressure Hydraulic Pump and mobile Hydraulic Valve evidence is retained from official catalog and brochure pages. Revenue was not asserted because it was not found in the retained primary sources. [S17]Company-stated
  • HYDAC corporate context comes from its official company route. Coil facts and image are scoped only to the cited HYDAC Technology Corporation catalogue part 3091667; revenue, certification, capacity, stock, delivery and service claims are not asserted. [S25]Company-stated

Frequently asked questions

What Filter Element product is documented for HYDAC?

The retained product material names Hydraulic and lube-oil filter elements, including Stat-X element technology and high-efficiency depth media. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Production capacity, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S17][S25]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.