Manufacturer profile

Liberty Pumps

Liberty Pumps is a manufacturer based in Bergen, New York, United States. [S2][S1]

Country
United States [S1]
City
Bergen, New York [S2]
LE40-Series
Official product image [S12]

Evidence scope

The retained official product route documents: Liberty Pumps publishes the LE40 series as submersible sewage pumps for residential sewage applications. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S8]

Sewage Pump

Documented series: LE40-series 4/10 hp submersible sewage pumps

Liberty Pumps publishes the LE40 series as submersible sewage pumps for residential sewage applications. [S6]

Documented specifications for Sewage Pump
Materialcast iron [S9]
  • LE40-series 4/10 hp submersible sewage pumps [S4]

Selection fit: Use LE40 only in the stated residential sewage route; confirm discharge, solids handling, voltage, installation, availability and lead time with Liberty Pumps. [S7]

Sump Pump

Documented series: 230 Series one-third-horsepower sump pumps.

Liberty documents the 230 Series one-third-horsepower sump pumps. [S5]

Documented specifications for Sump Pump
Materialaluminum [S11]
  • 230 Series one-third-horsepower sump pumps. [S5]

Selection fit: Evaluate the 230 Series only against its published sump-pump route; confirm liquid, solids, head, power, discharge, controls and installation with Liberty. [S5]

Product range and documented series

Liberty Pumps publishes the LE40 series as submersible sewage pumps for residential sewage applications. [S6]

  • LE40-series 4/10 hp submersible sewage pumps [S4]Source note: 4/10 hp Submersible Sewage Pumps
  • 230 Series one-third-horsepower sump pumps. [S5]Source note: 230 Series 1/3 HP Sump Pump

Procurement fit

For sewage-pump procurement, the documented guidance restricts the LE40 to its stated residential sewage route, with confirmation required from Liberty Pumps on discharge, solids handling, voltage, installation, availability, and lead time. For sump-pump procurement, the 230 Series is to be evaluated only against its published sump-pump route, with confirmation required from Liberty on liquid type, solids, head, power, discharge, controls, and installation. Direct manufacturer confirmation is the documented basis for each of these parameters.

Technical capabilities

The documented technical baseline is limited to the two named series. The LE40-series sewage pump is rated at 4/10 hp, configured as a submersible unit, and constructed of cast iron. The 230 Series sump pump is rated at one-third horsepower. Horsepower, configuration, and material are the only technical attributes provided in the source material. Further performance curves, flow rates, head values, and electrical specifications are not included in the documented facts and are not publicly documented.

Markets and applications

The documented applications are restricted to the two named use routes. The LE40-series is documented for residential sewage service. The 230 Series is documented for sump-pump service. Liberty Pumps is documented as a United States manufacturer based in Bergen, New York. No additional geographic markets, industry segments, certifications, distributor networks, or end-user references appear in the source material. Commercial, industrial, or municipal application claims are not publicly documented.

Evidence limitations

The following common buying fields are not publicly documented in the source material: flow rate, total dynamic head, impeller design, pass-through solids size, voltage and phase options, cord length, switch type, certifications, listings, warranty terms, lead time, distributor network, installed base, and company size or founding year. Only the LE40-series and 230 Series designations, their respective horsepower values, the submersible configuration of the LE40-series, its cast iron construction, and the Bergen, New York location are documented.

Editorial summary

Liberty Pumps is documented as a United States manufacturer located in Bergen, New York, with two product categories in the public record: sewage pumps and sump pumps. The sewage-pump category is represented by the LE40-series 4/10 hp submersible sewage pumps. The sump-pump category is represented by the 230 Series one-third-horsepower sump pumps. No additional categories, divisions, or product lines appear in the documented facts available for this profile.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S8]
  • Certifications [S8]
  • Availability or stock [S8]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Company identity and location are retained from Liberty's official directions page. LE40 sewage-pump scope and its exact official product image are retained from the LE40 product route. Revenue, certification, availability and delivery claims were not asserted. [S8]Company-stated
  • Liberty Pumps identity and Bergen location are retained from its official directions page. The 230 Series membership and page-bound product image are scoped to the named product route. Revenue, certification, stock, service and delivery claims were not asserted. [S10]Company-stated

Frequently asked questions

What Sewage Pump product is documented for Liberty Pumps?

The retained product material names LE40-series 4/10 hp submersible sewage pumps. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S8]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.