Manufacturer profile

Nanotec Electronic GmbH & Co. KG

Nanotec Electronic GmbH & Co. KG is a manufacturer based in Feldkirchen, Germany. [S2][S1]

Country
Germany [S1]
City
Feldkirchen [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Power and voltage
CL4-E supports stepper and brushless DC motors with up to 1050 W peak power and 58 V maximum operating voltage. [S4]
Control interfaces
Interfaces include CANopen, Modbus RTU, USB, clock/direction and encoder closed loop. [S5]
Nanotec CL4-E integrated stepper controller/drive
Official product image [S6]

Evidence scope

The retained official product route documents: Nanotec - Precise and Reliable Motion Control Solutions This dossier uses that cited route as the editorial scope. [S12]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S13]

Stepper Drive

Nanotec - Precise and Reliable Motion Control Solutions [S12]

Documented specifications for Stepper Drive
Ingress protectionIP65 [S8]
Materialaluminum [S9]
CSL3 rated power72 watts [S10]
4-axis controller power per axis150 watts [S11]

Product range and documented series

Nanotec - Precise and Reliable Motion Control Solutions [S12]

  • Nanotec CL4-E integrated stepper controller/drive [S6]Source note: Nanotec CL4-E integrated stepper controller/drive
  • Nanotec ST6018 NEMA 24 stepper motors [S7]Source note: Nanotec ST6018 NEMA 24 stepper motors
  • Ingress protection: IP65 [S8]Evidence scope: Ingress protectionSource note: IP65 BLDC motors with encoder
  • Material: aluminum [S9]Evidence scope: MaterialSource note: The die-cast aluminum end caps used on a standard motor perform an important function on a stepper motor: on the one hand, they serve to precisely align the motor shaft with the motor housing in order to achieve the most precise total radial runout possible.
  • CSL3 rated power: 72 watts [S10]Evidence scope: CSL3 rated powerSource note: Configurable controller/drive for brushless DC motors with a rated power of up to 72 watts.
  • 4-axis controller power per axis: 150 watts [S11]Evidence scope: 4-axis controller power per axisSource note: Compact EtherCAT controller/drive for four brushless DC or stepper motors with a rated power of up to 150 watts per axis.

Documented specifications

Ingress protectionIP65 [S8]
Materialaluminum [S9]
CSL3 rated power72 watts [S10]
4-axis controller power per axis150 watts [S11]

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Identity and location are retained from the cited official source. Product facts and visual are limited to Nanotec CL4-E integrated stepper controller/drive; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S13]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to Nanotec ST6018 NEMA 24 stepper motors; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S14]Company-stated

Frequently asked questions

What Stepper Drive product is documented for Nanotec Electronic GmbH & Co. KG?

The retained product material names Nanotec CL4-E integrated stepper controller/drive. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published power and voltage should a buyer compare?

The cited product material records: CL4-E supports stepper and brushless DC motors with up to 1050 W peak power and 58 V maximum operating voltage. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published control interfaces should a buyer compare?

The cited product material records: Interfaces include CANopen, Modbus RTU, USB, clock/direction and encoder closed loop. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S13]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.