Manufacturer profile

Pentair plc

Pentair plc is a manufacturer based in Twickenham, London, United Kingdom. [S2][S1]

Country
United Kingdom [S1]
City
Twickenham, London [S2]
Aurora 3800 Series Single Stage End Suction Centrifugal Pumps
Official product image [S21]

Evidence scope

The retained official product route documents: Pentair documents the Aurora 3800 as a single-stage end-suction centrifugal-pump series. This dossier uses that cited route as the editorial scope. [S8]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S11]

Centrifugal Pump

Documented series: Pentair Aurora 3800 Series single-stage end-suction centrifugal pumps, with published capacity to 4,200 gpm, head to 520 ft and temperature to 300 °F.

Pentair documents the Aurora 3800 as a single-stage end-suction centrifugal-pump series. [S8]

Documented specifications for Centrifugal Pump
Materialstainless steel [S12]
Pressure rating290 psi [S13]
Service temperature60°C [S14]
Flow rate90 GPM [S15]
  • Pentair Aurora 3800 Series single-stage end-suction centrifugal pumps, with published capacity to 4,200 gpm, head to 520 ft and temperature to 300 °F. [S4]
  • Pentair Aurora 382B single-stage vertical inline close-coupled and split-coupled centrifugal pumps. [S5]
  • Myers CMV5 sewage pumps. [S6]

Selection fit: Start with the Aurora 3800 route for published building-services, industrial-process, water/wastewater, irrigation or pool duties. Confirm duty point, liquid, materials, seal arrangement, motor, standards, availability and lead time with Pentair. [S9]

Sump Pump

Documented series: Hydromatic SD/SW/VS Series cast-iron sump pumps in one-third- and one-half-horsepower configurations.

Pentair documents Hydromatic SD/SW/VS Series cast-iron sump pumps. [S16]

Documented specifications for Sump Pump
MaterialCast Iron [S18]
Flow rate48 GPM [S19]
Service temperature49°C [S20]
  • Hydromatic SD/SW/VS Series cast-iron sump pumps in one-third- and one-half-horsepower configurations. [S7]

Selection fit: Evaluate Hydromatic SD/SW/VS only against its published cast-iron sump-pump route; confirm duty point, liquid, solids, electrical supply, discharge and installation with Pentair. [S16]

Product range and documented series

Pentair documents the Aurora 3800 as a single-stage end-suction centrifugal-pump series. [S8]

  • Pentair Aurora 3800 Series single-stage end-suction centrifugal pumps, with published capacity to 4,200 gpm, head to 520 ft and temperature to 300 °F. [S4]Source note: to 4200 G.P.M. (954 m3/hr); to 520 Feet (158 Meters); 300°F (149°C)
  • Pentair Aurora 382B single-stage vertical inline close-coupled and split-coupled centrifugal pumps. [S5]Source note: Aurora 382B Single Stage Vertical Inline Close/Split Coupled Centrifugal Pumps
  • Myers CMV5 sewage pumps. [S6]Source note: Pentair Myers CMV5 Sewage Pumps
  • Hydromatic SD/SW/VS Series cast-iron sump pumps in one-third- and one-half-horsepower configurations. [S7]Source note: SD/SW/VS Series Cast Iron Sump Pumps

Procurement fit

For centrifugal pump sourcing, the documented recommendation is to start with the Aurora 3800 route when evaluating single-stage end-suction units for building-services, industrial-process, water or wastewater, irrigation, or pool duties. When a single-stage vertical inline close-coupled or split-coupled pump is under evaluation, the documented recommendation is to start with Aurora 382B. For sump pump sourcing, evaluation is limited to the Hydromatic SD/SW/VS cast-iron sump-pump route. In all three cases, the documentation states that the duty point, liquid, materials or solids, seal arrangement or discharge, motor or electrical supply, standards, availability, and lead time must be confirmed directly with Pentair.

Technical capabilities

The Pentair Aurora 3800 Series single-stage end-suction centrifugal pumps are documented with a published capacity to 4,200 gpm, head to 520 ft, and temperature to 300 °F, with stainless steel as the stated material. The Aurora 382B is documented as a single-stage vertical inline close-coupled or split-coupled centrifugal pump. The Hydromatic SD/SW/VS Series sump pumps are documented in cast iron, available in one-third- and one-half-horsepower configurations. Hydraulic curves, efficiency points, seal arrangements, motor specifications, and standards compliance for the Aurora 382B and the Hydromatic SD/SW/VS units are not publicly documented in the source material on file.

Markets and applications

The Aurora 3800 route is documented as applicable to building-services, industrial-process, water and wastewater, irrigation, and pool duties. The Aurora 382B vertical inline configuration is documented for evaluation where a single-stage vertical inline close-coupled or split-coupled pump is being considered, with specific market or application segments not publicly documented in the source material. The Hydromatic SD/SW/VS Series is documented only as a cast-iron sump-pump route, with detailed market segmentation not publicly documented beyond the sump-pump category itself.

Evidence limitations

The source material documents series-level descriptions, headline hydraulic parameters for the Aurora 3800, material callouts, and horsepower options for the Hydromatic SD/SW/VS. The following items commonly required for procurement evaluation are not publicly documented in the on-file facts: detailed efficiency data, NPSH requirements, seal arrangements, motor specifications, listing or certification marks, distributor network, lead times, price indication, warranty terms, and country of manufacture for the individual units. Recent corporate, product, or market signals were not matched at the time of compilation.

Editorial summary

Pentair plc is documented in this directory under the centrifugal pump and sump pump categories. The centrifugal pump entries cover the Pentair Aurora 3800 Series single-stage end-suction configuration and the Aurora 382B single-stage vertical inline close-coupled or split-coupled variant. The sump pump entry covers the Hydromatic SD/SW/VS Series cast-iron units. Pentair plc is listed with a United Kingdom address in Twickenham, London. Procurement, technical, and application details below are drawn from the series-level documentation on file.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Pentair corporate-location evidence is retained from its official locations page. Aurora 3800, Aurora 382B and Myers CMV5 product evidence are retained from separate official product pages. Revenue, certification, availability and delivery claims were not asserted. [S11]Company-stated
  • Pentair plc corporate context is retained from its official locations page. The Hydromatic SD/SW/VS membership and page-bound product image are scoped to the named sump-pump series. Revenue, certification, stock, service and delivery claims were not asserted. [S17]Company-stated

Frequently asked questions

What Centrifugal Pump product is documented for Pentair plc?

The retained product material names Pentair Aurora 3800 Series single-stage end-suction centrifugal pumps, with published capacity to 4,200 gpm, head to 520 ft and temperature to 300 °F. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S11]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.