Manufacturer profile

Phytron GmbH

Phytron GmbH is a manufacturer based in Maisach, Germany. [S2][S1]

Country
Germany [S1]
City
Maisach [S2]
Website
phytron.eu

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Integrated axes
MCC-2 combines a CPU, indexer and two stepper-motor power stages in one stand-alone unit. [S4]
Output and microstepping
It drives two-phase motors at up to 3.5 A peak from 24–48 V DC with microstepping to 1/256. [S5]
Phytron MCC-2 stepper motor controller/drive
Official product image [S6]

Evidence scope

The retained official product route documents: Phytron documents MCC-2 as a complete two-axis stepper motor controller/drive. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S9]

Stepper Drive

Documented series: Phytron MCC-2 stepper motor controller/drive

Phytron documents MCC-2 as a complete two-axis stepper motor controller/drive. [S6]

Documented specifications for Stepper Drive
Voltage range24 to 70 V [S10]
Integrated axes
MCC-2 combines a CPU, indexer and two stepper-motor power stages in one stand-alone unit. [S4]
Output and microstepping
It drives two-phase motors at up to 3.5 A peak from 24–48 V DC with microstepping to 1/256. [S5]
  • Phytron MCC-2 stepper motor controller/drive [S6]

Selection fit: Interface and I/O options must be checked against the selected MCC-2 configuration. [S8]

Stepper Motor

Documented series: Phytron VSS/VSH vacuum stepper motors

Phytron documents VSS/VSH as a named family of two-phase hybrid vacuum stepper motors. [S7]

Documented specifications for Stepper Motor
Service temperature+200 °C [S15]
Ingress protectionIP 68 [S16]
Voltage range115 to 250 V [S17]
Step and torque range
The family uses a standard 1.8 degree step angle and spans 3.4 mN m to 13 N m holding torque. [S11]
Vacuum scope
Official variants are offered for vacuum conditions down to 1e-11 hPa. [S12]
  • Phytron VSS/VSH vacuum stepper motors [S7]

Selection fit: Diameter, torque, winding, lead, shaft, cryogenic suitability and radiation configuration depend on type. [S13]

Product range and documented series

Phytron documents MCC-2 as a complete two-axis stepper motor controller/drive. [S6]

  • Phytron MCC-2 stepper motor controller/drive [S6]Source note: Phytron MCC-2 stepper motor controller/drive
  • Phytron VSS/VSH vacuum stepper motors [S7]Source note: Phytron VSS/VSH vacuum stepper motors

Procurement fit

For the MCC-2, interface and I/O options must be verified against the selected configuration prior to order, as these vary by build. For the VSS/VSH family, diameter, torque, winding, lead, shaft, cryogenic suitability and radiation configuration are all type-dependent. Buyers should therefore request the specific type designation covering the required environmental and electrical parameters. Standardised ordering data is not publicly documented in the available material.

Technical capabilities

The MCC-2 integrates a CPU, indexer and two stepper-motor power stages in one stand-alone unit. It drives two-phase motors at up to 3.5 A peak from a 24 to 48 V DC supply, with microstepping resolution to 1/256. The VSS/VSH family uses a standard 1.8 degree step angle and spans 3.4 mN m to 13 N m holding torque. Official variants are offered for vacuum conditions down to 1e-11 hPa.

Markets and applications

The documented categories do not name specific end markets or reference installations. The VSS/VSH family is specified for vacuum conditions down to 1e-11 hPa, and the procurement notes for that family reference cryogenic suitability and radiation configuration as selectable options. Named application sectors, reference customers and qualified industry segments are not publicly documented. The specifying engineer must map the documented environmental envelope to the intended use case.

Evidence limitations

Company history, founding date, employee count, revenue and corporate ownership are not publicly documented in the supplied facts. No certifications, quality standards, compliance marks or test reports are listed. Additional product series beyond the MCC-2 and VSS/VSH families are not publicly documented. Lead times, pricing, distributor network, service coverage and warranty terms are not publicly documented. ISO classification, cleanroom rating and ATEX status are not publicly documented.

Editorial summary

Phytron GmbH is a German manufacturer based in Maisach that supplies stepper motor controllers/drives and stepper motors. The documented product range comprises the Phytron MCC-2 stepper motor controller/drive for two-phase stepper motors and the VSS/VSH family of vacuum stepper motors. Procurement and configuration are handled per series, with several parameters specified at the type level. This profile covers only the two documented categories and the variants listed in the source material.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S9]
  • Availability or stock [S9]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Identity and location are retained from the cited official source. Product facts and visual are limited to Phytron MCC-2 stepper motor controller/drive; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S9]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to Phytron VSS/VSH vacuum stepper motors; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S14]Company-stated

Frequently asked questions

What Stepper Drive product is documented for Phytron GmbH?

The retained product material names Phytron MCC-2 stepper motor controller/drive. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published integrated axes should a buyer compare?

The cited product material records: MCC-2 combines a CPU, indexer and two stepper-motor power stages in one stand-alone unit. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published output and microstepping should a buyer compare?

The cited product material records: It drives two-phase motors at up to 3.5 A peak from 24–48 V DC with microstepping to 1/256. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S9]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.