Manufacturer profile

Valcor Engineering Corporation

Valcor Engineering Corporation is a manufacturer based in Springfield, United States. [S2][S1]

Country
United States [S1]
City
Springfield [S2]
Website
valcor.com

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Published valve functions
The cited SV23 variants are offered normally closed, normally open or closed/open three-way diverting. [S4]
Published tubing and pressure
The one- or two-tube version accepts 1/16 to 3/8 in OD medical-grade silicone tubing and is specified up to 30 psig. [S5]
SV23 pinch valve; one tube
Official product image [S17]

Evidence scope

The retained official product route documents: Valcor documents SV23 as a solenoid pinch-valve line with one- and multi-tube configurations. This dossier uses that cited route as the editorial scope. [S8]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S10]

Pinch Valve

Documented series: Valcor SV23 solenoid pinch valves.

Valcor documents SV23 as a solenoid pinch-valve line with one- and multi-tube configurations. [S8]

Published valve functions
The cited SV23 variants are offered normally closed, normally open or closed/open three-way diverting. [S4]
Published tubing and pressure
The one- or two-tube version accepts 1/16 to 3/8 in OD medical-grade silicone tubing and is specified up to 30 psig. [S5]
  • Valcor SV23 solenoid pinch valves. [S6]

Selection fit: Start with SV23 when the required normal position or three-way function, tubing size and published 30 psig boundary fit the system. Confirm tubing, medium and final configuration with Valcor. [S9]

Solenoid Valve

Documented series: Valcor cryogenic solenoid-valve family, including SV91, SV95 and SV97.

Valcor documents cryogenic solenoid valves including direct-acting floating-seal and poppet designs. [S7]

Documented specifications for Solenoid Valve
Flow rate32 GPM [S15]
Materialstainless steel [S16]
Published SV91 scope
SV91 is described as a direct-acting normally closed or normally open cryogenic valve with 3/8-3/4 inch NPT ports and listed pressures up to 1,200 psi. [S11]
Published SV95 scope
The cited family describes SV95 and SV97 as direct-acting poppet-style valves; SV95 is shown as normally closed with 1/8-1/4 inch NPT ports. [S12]
  • Valcor cryogenic solenoid-valve family, including SV91, SV95 and SV97. [S7]

Selection fit: Use this route for cryogenic solenoid-valve comparisons, then confirm series, normal state, port and pressure for the specific application with Valcor. [S13]

Product range and documented series

Valcor documents SV23 as a solenoid pinch-valve line with one- and multi-tube configurations. [S8]

  • Valcor SV23 solenoid pinch valves. [S6]Source note: SV23 Solenoid Pinch Valves
  • Valcor cryogenic solenoid-valve family, including SV91, SV95 and SV97. [S7]Source note: Cryogenic Solenoid Valves

Procurement fit

For pinch valve selection, begin evaluation with the SV23 when the required normal position, three-way diverting function, tubing size within 1/16 to 3/8 inch OD, and the published 30 psig boundary align with system requirements. For cryogenic solenoid valves, use the SV91, SV95, and SV97 series as the starting reference set. Final configuration, tubing, medium compatibility, and pressure verification should be confirmed with Valcor prior to release of the purchase order.

Technical capabilities

The documented SV23 pinch valves are published as solenoid actuated and offered in normally closed, normally open, or closed/open three-way diverting functions. The one- or two-tube configuration accepts 1/16 to 3/8 inch OD medical-grade silicone tubing and is specified to 30 psig. The cryogenic SV91 is described as direct-acting, available in normally closed or normally open configurations, with 3/8 to 3/4 inch NPT ports and listed pressures to 1,200 psi. The SV95 and SV97 are direct-acting poppet-style valves, with SV95 shown as normally closed and ported 1/8 to 1/4 inch NPT.

Markets and applications

Application context must be inferred from the published specifications rather than from explicit market statements. The SV23 reference to medical-grade silicone tubing points to medical device, analytical instrument, or laboratory fluid handling service where such tubing is appropriate. The cryogenic SV91, SV95, and SV97 series, given their direct-acting construction and listed pressures, are consistent with low-temperature service such as industrial gas distribution, LNG handling, or cryogenic research installations.

Evidence limitations

Several common buying fields are not publicly documented for Valcor Engineering Corporation. Specific certification listings, material traceability, agency approvals, and quality system registrations are not present in the cited references. Detailed dimensions, weights, electrical coil specifications, response times, and cycle life data for the SV23, SV91, SV95, and SV97 are not provided. Pricing, lead time, and authorized distributor information are not publicly documented within the scope of the available facts.

Editorial summary

Valcor Engineering Corporation, based in Springfield, United States, is documented across two product categories: pinch valves and solenoid valves. The pinch valve offering centers on the SV23 solenoid pinch valve series. The solenoid valve category is represented by a cryogenic family that includes the SV91, SV95, and SV97 series. Published references cover the functional variants, port sizes, and pressure limits of these specific lines.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Valcor legal identity and Springfield location are retained from its official company page. SV23 functions, tubing/pressure context and page-bound image are scoped only to that cited route. Revenue, certification, stock, delivery and service claims were not asserted. [S10]Company-stated
  • Valcor corporate context comes from its official contact route. The profile facts and image are limited to the cited cryogenic-solenoid-valve family and do not assert broader availability or company claims. [S14]Company-stated

Frequently asked questions

What Pinch Valve product is documented for Valcor Engineering Corporation?

The retained product material names Valcor SV23 solenoid pinch valves. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published valve functions should a buyer compare?

The cited product material records: The cited SV23 variants are offered normally closed, normally open or closed/open three-way diverting. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published tubing and pressure should a buyer compare?

The cited product material records: The one- or two-tube version accepts 1/16 to 3/8 in OD medical-grade silicone tubing and is specified up to 30 psig. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S10]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.