Feedstock choice shifts lithium conversion economics more than the lithium-equivalent grade alone, with brine, spodumene and recycled material carrying different purification, logistics and integration burdens [S4][S5].
The 2026 cost curve must separate chemical conversion cost from mine or feedstock purchase price, because spodumene converters can lose margin when feedstock pricing rises faster than battery-grade lithium salt prices [S2][S5].
What the lithium conversion cost curve measures
The conversion-cost curve covers the processing steps that turn mined or recovered feedstocks into battery-grade lithium chemicals; it is not a lithium spot-price forecast and does not include resource extraction, exploration or the full battery-cell bill of materials [S4][S5].
A defensible 2026 comparison starts with lithium content, feed rate, chemical consumption, energy demand, recovery, capital intensity, plant utilization and delivered-feedstock logistics. The underlying facility model for battery-material supply configurations covers more than 80 global lithium, cobalt and nickel mines, refineries and battery-material plants, providing the relevant structure for comparing integrated and non-integrated configurations [S4].
Material cost remains dominant downstream. Lithium, cobalt and nickel can account for more than 70% of NMC cathode active material production costs, while cathode active material can represent 30–50% of the pack-level bill of materials [S4]. In the U.S. In NMC production, lithium, cobalt, and nickel make up over 70% of costs [S4].
Brine, spodumene and recycled feedstock compared
Brine, spodumene and recycled black mass occupy different positions on the conversion curve because they require different purification routes, produce different lithium salt options and carry different reagent and waste-management burdens [S4][S5].
The clearest economic distinction is exposure to the SC6 spodumene curve. Non-integrated producers can sit at the high end of the refining cost curve, and “SC6 feedstock pricing can make or break converter margins” [S5]. An integrated producer hedges this exposure by converting its own concentrate, while a merchant converter depends on purchased concentrate and spot or contract chemical pricing.
Recycling is a separate feedstock path rather than a direct spodumene analogue. End-of-life batteries can enter mechanical processing before metal recovery, and domestic recycling can complement primary mining in the supply of battery materials [S4]. Its economics depend on collection, sorting, black-mass quality, contaminant removal, recovery yield and chemical-grade finishing, not simply on the lithium content reported in the black mass.
Price pressure changed converter economics in 2026

Both lithium chemical and feedstock prices fell through Q3 2026, extending the correction that began in Q2, although the path remained volatile [S2]. Lower input prices reduce working-capital needs, but the effect on converter margins depends on contract timing and the relative movement of feedstock and product prices.
Benchmark’s 2 October 2026 review recorded the Lithium Carbonate Index at 220.75, down 14.05%, and the Lithium Hydroxide Index at 261.35, down 10.51%. The broader Lithium Index was 289.74, down 8.62% [S2]. The black mass index was 31.1, down 16.21%, which affects recycled-feedstock economics through the value of the recovered material package [S2].
Those index movements should not be treated as converter conversion costs. They are market-price indicators, while conversion cost remains a facility calculation. A converter can therefore face lower chemical prices and a lower concentrate price, but weak margin if its contracts lock in the old feedstock cost or if lower prices reduce inventory value faster than variable conversion costs fall.
For procurement and planning, lithium carbonate futures versus spot provides a separate framework for managing price exposure, but it does not replace feedstock-specific conversion-cost modelling.
Cost drivers ranked by feedstock pathway
Feedstock purchase price is the largest headline driver for non-integrated spodumene conversion, while chemical use, roasting, filtration and yield determine the processing spread; for brine, capital intensity, plant utilization and site infrastructure carry more weight [S4][S5].
For spodumene converters, the commercial formula begins with concentrate cost per tonne of contained lithium, then adjusts for lithium recovery, conversion yield, reagent consumption, energy, labour, maintenance, plant finance and logistics. Purchased feedstock and reagents dominate the cash cost, but fixed-cost absorption changes sharply with utilization. A plant operating below design rates carries the same or a reduced share of fixed cost across fewer saleable tonnes.
For brine-based conversion, processing and infrastructure become relatively more important because the pathway is tied to brine chemistry and site development. For recycled material, black-mass acquisition, sorting, pretreatment, contaminant removal and final purification add distinct cost layers. The comparison must retain the full refining route to battery-grade lithium chemicals rather than stop at an intermediate such as black mass or technical-grade carbonate.
Scale is not a universal ranking variable. A larger plant can lower fixed cost per tonne, but additional capacity only improves unit economics if feedstock supply, chemical logistics and market demand support higher throughput. The facility-level analysis spanning more than 80 global assets is designed to account for those configurations [S4].
Volume tier and lead time reshape the curve

Commercial-scale conversion spreads the fixed cost of roasting, filtration, crystallization, packaging and utilities over more tonnes, while a pilot or demonstration line carries a much higher fixed cost per tonne; no numerical threshold is assigned here because the research does not establish one [S4].
Lead time affects cost through capital duration and contracting structure. A new brine-linked or spodumene conversion facility must be designed, permitted, financed, commissioned and ramped before it reaches stable yields and full utilization. Brownfield expansion at an existing refinery can avoid some site and utility duplication, but may be constrained by available feedstock, reactor capacity, environmental permits and off-take demand.
Feedstock quality further separates facilities within the same nominal cost band. Impurities can increase reagent consumption, filtration burden, product rejection and working capital. A higher measured lithium grade does not automatically produce a lower battery-grade chemical cost if silica, alkalis or other impurities raise purification requirements. Conversely, a lower-grade resource can be economically attractive where its brine chemistry, logistics and permitting profile fit the selected process [S4].
Total cost of ownership beyond the conversion gate
The lowest conversion-cost route is not always the lowest delivered cost because power, reagent use, maintenance, waste treatment, inventory finance and product qualification all continue after the main reaction stage [S4][S5].
Energy consumption affects operating cost and carbon intensity, particularly where natural gas, electricity or steam prices are high. Reagent consumption is economically sensitive because hydrochloric acid, sulfuric acid, lime, soda ash and other process chemicals can move independently of lithium prices. Maintenance cost rises with corrosion, abrasive solids, fouling and variability in feedstock composition. Waste treatment and off-site disposal can also separate plants that otherwise show similar conversion costs.
Downstream qualification adds commercial time and expense before output becomes saleable battery-grade material. Contaminant control, batch consistency and customer qualification must be included because a technically produced carbonate or hydroxide that fails the agreed specification has no equivalent sale value. Working capital also rises with feedstock inventories, receivable terms and the time required to complete the conversion cycle.
The broader market evidence reinforces why chemistry and supply-chain configuration matter. Global demand for lithium-ion batteries rose from approximately 700 GWh in 2022 toward a projected 4.7 TWh by 2030, driven by electric vehicles, stationary storage and portable electronics [S4]. That scale supports larger plants and deeper supply chains, but it also raises the cost of a single failed qualification or interrupted feedstock supply.
Decision criteria for buyers and project developers

A feedstock decision should compare the full conversion route on four criteria: delivered feedstock cost, technical recovery and product quality, fixed-cost absorption and supply security; a mine with low resource cost can still produce an expensive battery-grade chemical after conversion [S4][S5].
Integrated producers should compare the value of owning or controlling feedstock with the capital and operating cost of the mine and conversion plant. Merchant converters should stress-test the SC6 concentrate price against lithium carbonate and hydroxide realization values, including contract lag. Recyclers should base comparisons on delivered black-mass cost, recovery yield, impurity removal and qualification performance rather than on a nominal lithium-equivalent value.
The method is unsuitable for ranking lithium resources by metal contained in the ground. It is also unsuitable for inferring a project’s bankability without including capital cost, permitting, financing and offtake. Conversely, it is the appropriate framework for comparing whether one conversion configuration can produce battery-grade chemicals more cheaply than another at specified utilization and feedstock prices.
Supply concentration is a material risk input. Indonesia and the Democratic Republic of Congo currently provide 59% of global primary nickel and 76% of global primary cobalt, respectively [S4]. These figures show why freight, trade policy, processing concentration and feedstock availability can move delivered conversion cost even when the processing plant itself is efficient.
Track two variables before updating a 2026 project cost model: the direction of the SC6 spodumene curve relative to lithium carbonate and hydroxide prices, and the realized battery-grade specification and utilization of each converter [S2][S5]. If feedstock prices continue to fall faster than chemical prices, merchant spodumene margins tighten; if chemical prices recover first while feedstock remains constrained, the reverse occurs.