The supplied listings include a new FARO Vantage at $10,500 and a used FARO ION at $4,100, but purchase price is only one part of the decision [S6][S7].
This guide compares new, used, and rented laser trackers for industrial alignment, inspection, aerospace, automotive, energy, and heavy-machinery work, with emphasis on calibration, accuracy, support, and lifecycle cost [S1][S4][S5].
Price ranges and total-cost comparison
The supplied listings show a new FARO Vantage at $10,500 and a used FARO ION at $4,100 [S6][S7]. A lower used price can reduce the initial outlay, but a reseller with a current calibration certificate is different from a private seller with a vague account, so support, calibration evidence, and acceptance testing must be compared [S3].
The comparison uses the prices and evidence provided in the research material.
Do not treat a used listing price as the expected cost of production measurement. Add calibration, maintenance, software, training, target accessories, possible repairs, and acceptance testing to the acquisition price before approving a purchase [S1][S3].
Accuracy evidence outranks age alone
A used tracker can be a rational purchase when its measured performance is documented, because the decisive issue is whether the unit meets its required accuracy under the intended operating conditions, not simply its model year [S3]. Used equipment from a metrology reseller with a current calibration certificate is very different from used equipment offered by a private seller with a vague account [S3].
Accuracy claims must be supported by calibration data for the actual instrument before it is approved for use [S3].
The performance test should be performed against the applicable procedure for the work. Before acceptance, record serial number, software version, target configuration, ambient conditions, measurement distances, repeatability, and certificate validity. The research also identifies regular calibration as a necessary part of tracker ownership [S3].
New, used, and rental by operating scenario

Buying new is the stronger fit when the tracker will be used frequently in one facility, when downtime or calibration interruptions are expensive, or when the measurement program requires predictable warranty and support terms [S1].
Buying used makes sense when capital is constrained, the instrument is supported by a metrology dealer, and the seller can provide traceable calibration evidence plus an acceptance test [S3]. A private-sale instrument may cost less at the invoice, but calibration evidence and reseller support are important purchasing considerations [S3].
Rental is the practical choice for short-term projects, plant shutdowns, emergency measurements, equipment trials, or temporary expansion of measurement capacity [S1]. Renting can also serve as a technical acceptance stage before committing to a used purchase, provided the rental provider confirms the exact tracker model, software, accessories, calibration status, and included support.
A laser tracker comparison should rank options by acquisition cost, calibration evidence, delivery and support certainty, and post-invoice cost. That sequence matches the four factors used in the dealer-versus-private-sale example [S3].
What disqualifies a used tracker
Reject a used tracker when the seller cannot provide a current calibration record, cannot identify the serial number and configuration, refuses an acceptance test, or cannot document support for the required software and accessories [S3]. In 2024, the quality manager rejected 7% of first submissions because their accuracy claims lacked supporting calibration data, while the manager approves roughly 200 instruments each year [S3].
Software and data compatibility are separate acceptance gates. FARO trackers may operate with CAM2 Measure, SpatialAnalyzer, or PolyWorks, and buyers should verify licensing, file compatibility, target hardware, and customer-specific software procedures before payment [S1]. A tracker that tracks accurately but cannot deliver required reports is not a qualified production instrument.
Instrument age alone is not a defensible cutoff. Determine the measurement method, target arrangement, accessories, and serviceability of the specific unit rather than applying a universal age limit [S2].
Ownership factors beyond the purchase price

Model age, configuration, calibration status, software, maintenance history, and service availability can outweigh a nominal saving. New-system pricing varies with model, installed features, software packages, calibration, maintenance, and support [S1]. The same factors apply to a used instrument, and a lower sticker price does not remove the need for those inputs.
The Vantage family is positioned as portable equipment for inspection and alignment, and FARO states that the portable system can reduce inspection time by up to 75% under the conditions of its product claim [S4]. That performance claim does not establish a universal saving for every plant; actual benefit depends on setup, target movement, software workflow, part geometry, and operator practice [S4].
For low-volume users, the lifecycle comparison should include rental duration, transport, setup, data processing, calibration responsibility, and the number of qualified operators. For a comparison of lower-cost measurement alternatives, an industrial total station can provide better angular accuracy but less distance accuracy than a laser tracker, and it must be pointed at the target [S9]. That makes it a different instrument class rather than a price-equivalent substitute for large-scale 3D metrology.
Procurement specification and acceptance checklist
Write the purchase specification around four non-negotiable items: required measurement volume, applicable accuracy specification, software deliverables, and evidence of current calibration. A Vantage S6 requirement should not be reduced to “used FARO” without stating the accuracy formula, target setup, inspection environment, and acceptance procedure [S3].
Require the seller to provide identity and configuration records, calibration certificate, software and firmware versions, available accessories, maintenance history, known defects, return conditions, and a documented acceptance-test result [S3]. For the $87,500 dealer example, those elements included a December 2023 certificate, an acceptance-test offer, and a support contact [S3].
The final commercial comparison should show total cost over the planned ownership period, not only purchase price. Include calibration, maintenance, repairs, training, software, target consumables, support, downtime, and expected utilization. For a short assignment, rental can remain the lowest-risk route; for a documented dealer-supported used unit, the $87,500 example provides a credible lower-cost alternative to a $150,000–$250,000 new purchase [S1][S3].
Before release of payment, place the laser tracker through the approved acceptance procedure and compare measured results with the purchase specification [S3]. Track the serial number, certificate date, test date, software version, measured distances, environmental conditions, and corrective work; those records are the defensible evidence that the lower purchase price has not been offset by an unqualified instrument.