Manufacturer profile

Asahi/America, Inc.

Asahi/America, Inc. is a manufacturer based in Lawrence, Massachusetts, United States. [S2][S1]

Country
United States [S1]
City
Lawrence, Massachusetts [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Body and size
Type-14 is a flanged diaphragm valve in ½–4 in sizes with a one-piece molded flanged thermoplastic body. [S4]
Diaphragm construction
The page specifies a three-layer EPDM/PVDF/PTFE diaphragm construction. [S5]
Type-14 Flanged diaphragm valve
Official product image [S24]

Evidence scope

The retained official product route documents: Asahi/America documents Type-14 as a flanged thermoplastic diaphragm valve with a one-piece molded body. This dossier uses that cited route as the editorial scope. [S9]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S11]

Diaphragm Valve

Documented series: Asahi/America Type-14 flanged thermoplastic diaphragm valves in ½–4 in sizes.

Asahi/America documents Type-14 as a flanged thermoplastic diaphragm valve with a one-piece molded body. [S9]

Documented specifications for Diaphragm Valve
Pressure rating90 PSI [S12]
Body and size
Type-14 is a flanged diaphragm valve in ½–4 in sizes with a one-piece molded flanged thermoplastic body. [S4]
Diaphragm construction
The page specifies a three-layer EPDM/PVDF/PTFE diaphragm construction. [S5]
  • Asahi/America Type-14 flanged thermoplastic diaphragm valves in ½–4 in sizes. [S6]

Selection fit: Start with Type-14 when a flanged thermoplastic diaphragm valve and its stated three-layer diaphragm match the application; verify material compatibility, size, flange standard, pressure and temperature with Asahi/America. [S10]

Electric Ball Valve

Documented series: Asahi/America Series 19 Electric Actuator Fast Packs with Type-21 ball-valve options.

Asahi/America documents Series 19 Fast Packs as factory-assembled and tested electric valve-and-actuator packages. [S13]

Documented specifications for Electric Ball Valve
Pressure rating90 PSI [S12]
Electrical package
The cited Series 19 electrical option is stated for 95–265 VAC. [S14]
Ball-valve selection
Listed Type-21 ball-valve options are PVC/EPDM, PVC/FKM, CPVC/EPDM and CPVC/FKM from 1/2–4 in. [S15]
  • Asahi/America Series 19 Electric Actuator Fast Packs with Type-21 ball-valve options. [S7]

Selection fit: Start with the Series 19 Fast Pack when a factory-assembled electric package and the listed Type-21 material, seal and size options suit the duty. Confirm the selected valve, actuator, voltage, medium and final size with Asahi/America. [S16]

Pinch Valve

Documented series: Asahi/America Dymatrix AVPV3 pneumatic pinch valves.

Asahi/America documents Dymatrix AVPV3 as a pneumatic pinch valve for DI-water and chemical-flow applications. [S18]

Documented specifications for Pinch Valve
Pressure rating1psi [S23]
Published size and connections
The cited AVPV3 covers 6 to 32 mm (1/4 to 1 in) and offers Flare and S-300 connections. [S19]
Published product form
The cited page distinguishes the pneumatic PV3 from the manual PVM and describes straight flow and seal-performance features. [S20]
  • Asahi/America Dymatrix AVPV3 pneumatic pinch valves. [S8]

Selection fit: Start with AVPV3 when the cited 6 to 32 mm size, Flare/S-300 connection and pneumatic straight-flow format fit DI-water or chemical-flow duty. Confirm material, medium and final configuration with Asahi/America. [S21]

Product range and documented series

Asahi/America documents Type-14 as a flanged thermoplastic diaphragm valve with a one-piece molded body. [S9]

  • Asahi/America Type-14 flanged thermoplastic diaphragm valves in ½–4 in sizes. [S6]Source note: Type-14 Flanged diaphragm valve; ½–4 in
  • Asahi/America Series 19 Electric Actuator Fast Packs with Type-21 ball-valve options. [S7]Source note: Series 19 Electric Actuator Fast Packs; Type-21 ball valve
  • Asahi/America Dymatrix AVPV3 pneumatic pinch valves. [S8]Source note: Dymatrix Pinch Valve - Pneumatic; AVPV3

Procurement fit

For flanged thermoplastic diaphragm valve duty, begin evaluation with the Type-14 series in ½–4 in sizes. For factory-assembled electric actuation, begin with the Series 19 Fast Pack when the listed Type-21 PVC/EPDM, PVC/FKM, CPVC/EPDM, or CPVC/FKM material and seal combinations from 1/2–4 in suit the service. For low-flow pneumatic isolation in 6 to 32 mm (1/4 to 1 in) sizes, start with the Dymatrix AVPV3 where Flare or S-300 connections are required. In all cases, confirm final material, size, medium, and configuration with Asahi/America before release.

Technical capabilities

The Type-14 diaphragm valve uses a one-piece molded flanged thermoplastic body in ½–4 in sizes and is specified with a three-layer EPDM/PVDF/PTFE diaphragm construction. The Series 19 Fast Pack supplies an electric actuator package rated for 95–265 VAC, paired with Type-21 ball-valve options in PVC/EPDM, PVC/FKM, CPVC/EPDM, and CPVC/FKM from 1/2–4 in. The Dymatrix AVPV3 pneumatic pinch valve is documented at 6 to 32 mm (1/4 to 1 in) with Flare and S-300 connection variants, distinguished from the manual PVM by its pneumatic straight-flow design and seal-performance features.

Markets and applications

Documented procurement guidance associates the Type-14 with flanged thermoplastic diaphragm service in ½–4 in lines, where the stated three-layer EPDM/PVDF/PTFE diaphragm construction is acceptable. The Series 19 Fast Pack is positioned for electric-actuated service using the four Type-21 material and seal combinations listed at 1/2–4 in. The Dymatrix AVPV3 is cited for DI-water or chemical-flow duty in 6 to 32 mm (1/4 to 1 in) pneumatic installations with Flare or S-300 connections. Specific end-market sectors, installed-base references, and regulatory approvals are not publicly documented.

Evidence limitations

Country of manufacture is stated as United States, with a published office in Lawrence, Massachusetts. Detailed end-user references, sector penetration figures, agency approvals, and quality certifications are not publicly documented. Pressure ratings, temperature limits, cycle-life figures, and torque data for each series are not publicly documented. Pricing structures, lead times, and distributor networks are not publicly documented. The Type-14, Series 19 Fast Pack, and Dymatrix AVPV3 descriptions are limited to the body, diaphragm, electrical, and connection data reproduced above.

Editorial summary

Asahi/America, Inc. is a United States manufacturer located in Lawrence, Massachusetts, with documented product coverage in the diaphragm valve, electric ball valve, and pinch valve categories. The publicly cited catalogue scope is limited to three series: the Type-14 flanged thermoplastic diaphragm valve, the Series 19 Electric Actuator Fast Pack with Type-21 ball-valve options, and the Dymatrix AVPV3 pneumatic pinch valve. The editorial scope of this profile is restricted to what is publicly documented, and no additional product lines, divisions, or subsidiaries are addressed in the present entry.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Asahi/America identity and Lawrence location are retained from its official company page. Type-14 body, size, diaphragm construction and product image are scoped only to the cited product route. Revenue, certification, stock, delivery and service claims were not asserted. [S11]Company-stated
  • Asahi/America identity and Lawrence location are retained from its official company page. Series 19 package, electrical, Type-21 ball-valve selection and page-bound product-image evidence are scoped only to the cited Fast Packs route. Revenue, certification, stock, delivery and service claims were not asserted. [S17]Company-stated
  • Asahi/America identity and Lawrence context are retained from its company page. Dymatrix AVPV3 application, size, connection, product format and page-bound image are scoped only to that cited route. Revenue, certification, stock, delivery and service claims were not asserted. [S22]Company-stated

Frequently asked questions

What Diaphragm Valve product is documented for Asahi/America, Inc.?

The retained product material names Asahi/America Type-14 flanged thermoplastic diaphragm valves in ½–4 in sizes. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published body and size should a buyer compare?

The cited product material records: Type-14 is a flanged diaphragm valve in ½–4 in sizes with a one-piece molded flanged thermoplastic body. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published diaphragm construction should a buyer compare?

The cited product material records: The page specifies a three-layer EPDM/PVDF/PTFE diaphragm construction. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S11]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.