Procurement directory

Hydraulic Power Unit Manufacturers

Compare the documented product facts shown for each cited route before opening a dossier. A missing dimension remains absent rather than being inferred from a related series.

Coverage
10 canonical company dossiers
Compare here
Product range, product facts and selection scope
Evidence basis
Official product routes retained per category

Source-bound comparison

Compare documented product facts

Each cell repeats only the product facts retained for that company’s category evidence. Open the dossier for the source note and evidence boundary.

ManufacturerRetained product facts
Parker Hannifin Corporation
  • Published product factSeries A threaded piston, ACP crimped piston, BA bladder and AD diaphragm accumulators
  • Published product factParker mobile cylinders: single- and double-acting telescopic cylinders plus welded rod cylinders; the published bore ranges are 3.25–48 in for telescopic and 1.5–30 in for welded rod cylinders.
WEBER-HYDRAULIK
  • Published product factSingle-acting, double-acting and telescopic hydraulic cylinders, including customized cylinder development and series production.
HAWE Hydraulik SE
  • Published product factType AC hydraulic miniature diaphragm accumulators, 13 or 40 cm³ nominal volume, with operating pressure up to 500 bar
  • Published product factCompact, standard, servo and air-driven hydraulic power packs, including FXU (FlexUnit) standard packs and R/RG hydraulic power-pack routes.
Moog Inc.
  • Published product factIndustrial mechanical-feedback servo valves, electronic-feedback servo and proportional valves, miniature servo/proportional valves and special-feature variants, including standard and customized configurations with analogue-signal or fieldbus options.
Hydraproducts Ltd
  • Published product factStandard hydraulic units, micro units, mini AC/DC units and bespoke hydraulic power units, including published standard, mini and micro range descriptions.
Bosch Rexroth AG
  • Published product factHAB bladder-type hydraulic accumulators
  • Published product factHAD diaphragm-type hydraulic accumulators
HYDAC
  • Published product factHydraulic and lube-oil filter elements, including Stat-X element technology and high-efficiency depth media
  • Published product factHydraulic and lube-oil filter elements with Stat-X technology and high-efficiency depth (absolute) filter media
MTE Hydraulics Inc.
  • Published product factCustom DC hydraulic power units with 12–48 VDC motors and custom AC hydraulic power units with single- and three-phase motor options; both product pages retain MTE pump and reservoir options.
Bucher Hydraulics
  • Published product factGPP PowerPacks, Smart PowerPacks, Electro-Pumps ET, Series UP, M-Series mobile DC/AC packs, MT & T industrial/commercial AC packs and YBZ application-specific units.
  • Published product factQXEHX internal-gear hydraulic pumps for open circuits, fixed- or variable-speed drives and reverse operation, with published working pressure up to 280 bar and speeds up to 6,050 rpm.
HPI SAS
  • Published product fact2G modular mini power packs plus HPI Micro 2G, Micro 3G and Silent micro power-pack routes; the published micro route is available in DC or single- and three-phase AC configurations with 2.0–25.8 l/min flow and up to 300 bar.
  • Published product factHydraulic gear pumps from 0.25 to 250 cm³/rev with published peak pressure up to 330 bar; the modular architecture supports multiple-pump configurations with two to five sections.

  1. Parker Hannifin Corporation

    Category evidenceParker's Accumulator Central catalog covers piston, bladder and diaphragm accumulator documentation.

    Published product fact
    Series A threaded piston, ACP crimped piston, BA bladder and AD diaphragm accumulators
    Published product fact
    Parker mobile cylinders: single- and double-acting telescopic cylinders plus welded rod cylinders; the published bore ranges are 3.25–48 in for telescopic and 1.5–30 in for welded rod cylinders.

    LocationDes Plaines, United States

    Official product evidence

  2. WEBER-HYDRAULIK

    Category evidenceWEBER-HYDRAULIK describes itself as a partner for customized and reliable hydraulic solutions.

    Published product fact
    Single-acting, double-acting and telescopic hydraulic cylinders, including customized cylinder development and series production.

    LocationGüglingen, Germany

    Official product evidence

  3. HAWE Hydraulik SE

    Category evidenceHAWE documents the type AC hydraulic miniature accumulator as a diaphragm accumulator.

    Published product fact
    Type AC hydraulic miniature diaphragm accumulators, 13 or 40 cm³ nominal volume, with operating pressure up to 500 bar
    Published product fact
    Compact, standard, servo and air-driven hydraulic power packs, including FXU (FlexUnit) standard packs and R/RG hydraulic power-pack routes.

    LocationAschheim (near Munich), Germany

    Official product evidence

  4. Moog Inc.

    Category evidenceMoog publishes servo and proportional valves for industrial machines that control an actuator's position, force or speed through mechanical or electronic spool-position feedback.

    Published product fact
    Industrial mechanical-feedback servo valves, electronic-feedback servo and proportional valves, miniature servo/proportional valves and special-feature variants, including standard and customized configurations with analogue-signal or fieldbus options.

    LocationElma, United States

    Official product evidence

  5. Hydraproducts Ltd

    Category evidenceHydraproducts Ltd describes in-house hydraulic power-pack design and manufacture for mobile and industrial applications.

    Published product fact
    Standard hydraulic units, micro units, mini AC/DC units and bespoke hydraulic power units, including published standard, mini and micro range descriptions.

    LocationGloucester, United Kingdom

    Official product evidence

  6. Bosch Rexroth AG

    Category evidenceBosch Rexroth documents bladder-type and diaphragm-type hydraulic accumulators for industrial hydraulic applications.

    Published product fact
    HAB bladder-type hydraulic accumulators
    Published product fact
    HAD diaphragm-type hydraulic accumulators

    LocationLohr am Main, Germany

    Official product evidence

  7. HYDAC

    Category evidenceHYDAC's official website presents the company across hydraulics, electronics and filtration, while its retained catalogs document category-specific product families.

    Published product fact
    Hydraulic and lube-oil filter elements, including Stat-X element technology and high-efficiency depth media
    Published product fact
    Hydraulic and lube-oil filter elements with Stat-X technology and high-efficiency depth (absolute) filter media

    LocationSulzbach/Saar, Germany

    Official product evidence

  8. MTE Hydraulics Inc.

    Category evidenceMTE Hydraulics Inc. documents AC and DC hydraulic power units alongside its hydraulic pumps, motors and flow dividers.

    Published product fact
    Custom DC hydraulic power units with 12–48 VDC motors and custom AC hydraulic power units with single- and three-phase motor options; both product pages retain MTE pump and reservoir options.

    LocationRockford, United States

    Official product evidence

  9. QXEHX Internal Gear Pumps

    Bucher Hydraulics

    Category evidenceBucher Hydraulics documents serviceable GPP PowerPacks, Smart PowerPacks and compact mobile or industrial hydraulic power-pack routes.

    Published product fact
    GPP PowerPacks, Smart PowerPacks, Electro-Pumps ET, Series UP, M-Series mobile DC/AC packs, MT & T industrial/commercial AC packs and YBZ application-specific units.
    Published product fact
    QXEHX internal-gear hydraulic pumps for open circuits, fixed- or variable-speed drives and reverse operation, with published working pressure up to 280 bar and speeds up to 6,050 rpm.

    LocationKlettgau, Germany

    Official product evidence

  10. Hydraulic Gear Pumps

    HPI SAS

    Category evidenceHPI SAS describes itself as an independent French designer and manufacturer of custom hydraulic components and mini power packs.

    Published product fact
    2G modular mini power packs plus HPI Micro 2G, Micro 3G and Silent micro power-pack routes; the published micro route is available in DC or single- and three-phase AC configurations with 2.0–25.8 l/min flow and up to 300 bar.
    Published product fact
    Hydraulic gear pumps from 0.25 to 250 cm³/rev with published peak pressure up to 330 bar; the modular architecture supports multiple-pump configurations with two to five sections.

    LocationChennevières-sur-Marne, France

    Official product evidence

Return to the Hydraulic Power Unit encyclopedia guide