Manufacturer profile

Oriental Motor Co., Ltd.

Oriental Motor Co., Ltd. is a manufacturer based in Tokyo, Japan. [S2][S1]

Country
Japan [S1]
City
Tokyo [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Output and supply
The exact article is rated 40 W for 110/115 V AC operation. [S4]
Shaft and performance
It lists an 8 mm shaft, 2900 rpm, 0.135 N·m, Class B insulation and IP20 protection. [S5]
Oriental Motor 4IK40A-BW2U World K round-shaft AC motor
Official product image [S6]

Evidence scope

The retained official product route documents: Oriental Motor documents 4IK40A-BW2U as a finished round-shaft motor with no gearhead. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S10]

Ac Motor

Documented series: Oriental Motor 4IK40A-BW2U World K round-shaft AC motor

Oriental Motor documents 4IK40A-BW2U as a finished round-shaft motor with no gearhead. [S6]

Documented specifications for Ac Motor
Ingress protectionIP67 [S11]
Materialstainless steel [S12]
Service temperature130°C [S13]
Output and supply
The exact article is rated 40 W for 110/115 V AC operation. [S4]
Shaft and performance
It lists an 8 mm shaft, 2900 rpm, 0.135 N·m, Class B insulation and IP20 protection. [S5]
  • Oriental Motor 4IK40A-BW2U World K round-shaft AC motor [S6]

Selection fit: Keep every electrical, shaft, speed and protection fact scoped to exact 4IK40A-BW2U. [S9]

Stepper Drive

Documented series: Oriental Motor CVD five-phase stepper motor drivers

Oriental Motor documents CVD as a named family of finished five-phase stepper motor drivers. [S7]

Supply and stepping
The CVD family uses 24 V DC input and advanced microstepping. [S14]
Control variants
Official configurations include pulse input, RS-485, fully closed-loop, speed-control and multi-axis variants. [S15]
  • Oriental Motor CVD five-phase stepper motor drivers [S7]

Selection fit: Axis count, current, connector orientation, interface, closed-loop function and mounting vary by catalog number. [S16]

Stepper Motor

Documented series: Oriental Motor PKP544MN18B five-phase stepper motor

Oriental Motor documents PKP544MN18B as a finished five-phase stepper motor. [S8]

Frame and step angle
The exact motor has a 42 mm frame, 39 mm length and 0.36 degree step angle. [S18]
Torque and current
The page specifies 0.26 N m holding torque and 1.8 A per phase. [S19]
  • Oriental Motor PKP544MN18B five-phase stepper motor [S8]

Selection fit: Cable, shaft, winding, torque and current must remain attached to the selected PKP catalog number. [S20]

Product range and documented series

Oriental Motor documents 4IK40A-BW2U as a finished round-shaft motor with no gearhead. [S6]

  • Oriental Motor 4IK40A-BW2U World K round-shaft AC motor [S6]Source note: Oriental Motor 4IK40A-BW2U World K round-shaft AC motor
  • Oriental Motor CVD five-phase stepper motor drivers [S7]Source note: Oriental Motor CVD five-phase stepper motor drivers
  • Oriental Motor PKP544MN18B five-phase stepper motor [S8]Source note: Oriental Motor PKP544MN18B five-phase stepper motor

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Identity and location are retained from the cited official source. Product facts and visual are limited to Oriental Motor 4IK40A-BW2U World K round-shaft AC motor; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S10]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to Oriental Motor CVD five-phase stepper motor drivers; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S17]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to Oriental Motor PKP544MN18B five-phase stepper motor; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S21]Company-stated

Frequently asked questions

What AC Motor product is documented for Oriental Motor Co., Ltd.?

The retained product material names Oriental Motor 4IK40A-BW2U World K round-shaft AC motor. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published output and supply should a buyer compare?

The cited product material records: The exact article is rated 40 W for 110/115 V AC operation. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published shaft and performance should a buyer compare?

The cited product material records: It lists an 8 mm shaft, 2900 rpm, 0.135 N·m, Class B insulation and IP20 protection. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S10]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.