Manufacturer profile

SAB Bröckskes GmbH & Co. KG

SAB Bröckskes GmbH & Co. KG is a manufacturer based in Viersen, Germany. [S2][S1]

Country
Germany [S1]
City
Viersen [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Electrical rating
U0/U 300/500 V. [S4]
Flex and environment
Continuously flexible, oil resistant and flame retardant; DIN VDE temperature range -50 to +90 °C. [S5]
SABdynamic 900 Control PUR cable
Official product image [S24]

Evidence scope

The retained official product route documents: SAB Bröckskes documents SABdynamic 900 Control as a continuously flexible PUR control cable for dynamic cable-chain work. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S10]

Control Cable

Documented series: SABdynamic 900 Control.

SAB Bröckskes documents SABdynamic 900 Control as a continuously flexible PUR control cable for dynamic cable-chain work. [S6]

Documented specifications for Control Cable
Service temperature-50 °C [S11]
Electrical rating
U0/U 300/500 V. [S4]
Flex and environment
Continuously flexible, oil resistant and flame retardant; DIN VDE temperature range -50 to +90 °C. [S5]
  • SABdynamic 900 Control. [S6]

Selection fit: Compare for dynamic drag-chain control wiring after checking actual bend-cycle, conductor and certification needs against the linked data sheet. [S9]

Drag Chain Cable

Documented series: SABdynamic 900 Control continuously flexible PUR cable.

SAB Bröckskes documents SABdynamic 900 Control as a continuously flexible PUR control cable for high-stress drag-chain travel. [S6]

Documented specifications for Drag Chain Cable
Flame / recognitionUL-approved [S16]
Service temperature-50 °C [S17]
Supply length05 m [S18]
StandardIEC 60332-1-2 [S19]
Electrical rating
U0/U 300/500 V. [S12]
Flex and environment
Continuously flexible, oil resistant and flame retardant; DIN VDE temperature range -50 to +90 degrees C. [S13]
  • SABdynamic 900 Control continuously flexible PUR cable. [S7]

Selection fit: Compare for continuous high-bending-stress or long-travel drag-chain control wiring; confirm conductor count, bend radius and travel profile. [S14]

Shielded Cable

Documented series: SAB S 910 CP shielded handling cable

SAB Bröckskes documents S 910 CP as a screened continuously flexible handling cable. [S8]

Screened construction
The construction table specifies a tinned-copper overall braid screen, TPE insulation and a PUR outer sheath. [S20]
Voltage and bend radius
The page lists U0/U 0.6/1 kV and a continuously flexible minimum bend radius of 7.5 x cable diameter. [S21]
  • SAB S 910 CP shielded handling cable [S8]

Selection fit: Compare conductor size, braid screen, voltage, PUR environment and continuous-flex bend radius before selection. [S22]

Product range and documented series

SAB Bröckskes documents SABdynamic 900 Control as a continuously flexible PUR control cable for dynamic cable-chain work. [S6]

  • SABdynamic 900 Control. [S6]Source note: Continuously flexible PUR control cable
  • SABdynamic 900 Control continuously flexible PUR cable. [S7]Source note: SABdynamic 900 Control
  • SAB S 910 CP shielded handling cable [S8]Source note: SAB S 910 CP shielded handling cable

Procurement fit

Selection should match the documented use case to the corresponding series. The SABdynamic 900 Control is listed for dynamic drag-chain control wiring, with the manufacturer advising verification of actual bend cycle, conductor count, and certification against the linked data sheet before purchase. The SAB S 910 CP is listed for shielded handling, where conductor size, braid screen, voltage class, PUR environmental compatibility, and continuous-flex bend radius should be confirmed. Comparative bidding across the three categories should reference the same data sheet values rather than the catalog summary.

Technical capabilities

SABdynamic 900 Control is rated for a service temperature of 90°C, is halogen-free, and is tested to DIN EN 50396. Electrical rating is U0/U 300/500 V. The cable is continuously flexible, oil resistant, and flame retardant, with a DIN VDE temperature range of -50 to +90 °C. The SAB S 910 CP shielded handling cable is rated for 80°C, halogen-free, with a tinned-copper overall braid screen, TPE insulation, and a PUR outer sheath. Voltage is U0/U 0.6/1 kV, with a continuously flexible minimum bend radius of 7.5 x cable diameter.

Markets and applications

Documented applications correspond to the three recorded categories. The control and drag-chain series are indicated for dynamic drag-chain control wiring, including continuously flexed installations and environments with oil exposure. Temperature exposure matches the DIN VDE range of -50 to +90 °C for the SABdynamic 900 Control, while the shielded series covers 80°C service in PUR-jacketed handling runs. Specific end-user industries, approvals beyond DIN EN 50396, and segment revenue shares are not publicly documented and therefore are not stated in this profile.

Evidence limitations

Several typical buying fields are not publicly documented in the directory record. Conductor counts, cross-sectional sizes, exact cycle ratings, fire performance classes beyond flame retardant, halogen-free test reports, and chemical resistance listings beyond oil are not publicly documented. Approvals such as UL, CSA, or IEC ratings beyond DIN EN 50396 and the DIN VDE temperature range are not publicly documented. Company size, founding date, annual turnover, and customer references are not publicly documented in the supplied facts and are omitted from this profile.

Editorial summary

SAB Bröckskes GmbH & Co. KG is a cable manufacturer located in Viersen, Germany. The directory records three product categories: control cable, drag chain cable, and shielded cable. Documented offerings include the SABdynamic 900 Control series in the control and drag-chain segments, and the SAB S 910 CP series in the shielded handling segment. Specifications listed are drawn from manufacturer data and applicable standards. This profile is limited to the categories and series shown; further product lines have not been recorded in the directory and remain not publicly documented.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Corporate identity and location are retained from the cited official entity source. Product facts and the visual are limited to SABdynamic 900 Control. No revenue, capacity, availability or broader company-wide product claim is asserted. [S10]Company-stated
  • Corporate identity and location are retained from the official imprint. Product facts and visual are limited to SABdynamic 900 Control. [S15]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to SAB S 910 CP shielded handling cable; no unlisted company-wide performance, availability, factory or revenue claim is asserted. [S23]Company-stated

Frequently asked questions

What Control Cable product is documented for SAB Bröckskes GmbH & Co. KG?

The retained product material names SABdynamic 900 Control. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published electrical rating should a buyer compare?

The cited product material records: U0/U 300/500 V. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published flex and environment should a buyer compare?

The cited product material records: Continuously flexible, oil resistant and flame retardant; DIN VDE temperature range -50 to +90 °C. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Production capacity, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S10]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.