Manufacturer profile

TECO-Westinghouse Motor Company

TECO-Westinghouse Motor Company is a manufacturer based in Round Rock, United States. [S2][S1]

Country
United States [S1]
City
Round Rock [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Power and speed
The family covers 1/4–10 hp at 3600, 1800 or 1200 rpm. [S4]
Electrical and duty
The page lists 230/460 V, 60 Hz, three-phase continuous duty, 1.15 service factor and Class F insulation. [S5]
TECO-Westinghouse rolled-steel TEFC NEMA Premium motors
Official product image [S6]

Evidence scope

The retained official product route documents: TECO-Westinghouse documents a finished rolled-steel TEFC NEMA Premium motor family. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S10]

Ac Motor

Documented series: TECO-Westinghouse rolled-steel TEFC NEMA Premium motors

TECO-Westinghouse documents a finished rolled-steel TEFC NEMA Premium motor family. [S6]

Documented specifications for Ac Motor
MaterialAluminum [S11]
Power and speed
The family covers 1/4–10 hp at 3600, 1800 or 1200 rpm. [S4]
Electrical and duty
The page lists 230/460 V, 60 Hz, three-phase continuous duty, 1.15 service factor and Class F insulation. [S5]
  • TECO-Westinghouse rolled-steel TEFC NEMA Premium motors [S6]

Selection fit: Horsepower, speed, frame, mounting, voltage and enclosure vary by catalog number. [S9]

Explosion Proof Motor

Documented series: TECO-Westinghouse TEXP NEMA Premium Efficiency explosion-proof motors

TECO-Westinghouse Motor Company manufactures industrial electric motors in Round Rock, Texas. [S12]

Documented specifications for Explosion Proof Motor
MaterialAluminum [S14]
  • TECO-Westinghouse TEXP NEMA Premium Efficiency explosion-proof motors [S7]

Selection fit: Class I Div. 1 Group C & D and Class II Groups E, F and G TEFC motors, 1 HP through 400 HP. [S13]

Vfd Duty Motor

Documented series: TECO-Westinghouse MAX-E2/841 NEMA Premium inverter severe-duty TEFC motors

TECO-Westinghouse manufactures industrial AC motors in Round Rock, Texas, including inverter-duty MAX-E2/841 motors. [S15]

Documented specifications for Vfd Duty Motor
MaterialAluminum [S17]
  • TECO-Westinghouse MAX-E2/841 NEMA Premium inverter severe-duty TEFC motors [S8]

Selection fit: Inverter-duty TEFC motors suitable per NEMA MG-1 Part 31, with 20:1 variable torque and 10:1 constant torque. [S16]

Product range and documented series

TECO-Westinghouse documents a finished rolled-steel TEFC NEMA Premium motor family. [S6]

  • TECO-Westinghouse rolled-steel TEFC NEMA Premium motors [S6]Source note: TECO-Westinghouse rolled-steel TEFC NEMA Premium motors
  • TECO-Westinghouse TEXP NEMA Premium Efficiency explosion-proof motors [S7]Source note: TEXP NEMA Premium Efficiency Explosion Proof – TECO-Westinghouse | The world leader in manufacturing electric motors and generators Skip to
  • TECO-Westinghouse MAX-E2/841 NEMA Premium inverter severe-duty TEFC motors [S8]Source note: remium Efficiency – Inverter, Severe Duty, TEFC – TECO-Westinghouse | The world leader in manufacturing electric motors and generators Skip t

Procurement fit

For the rolled-steel TEFC line, horsepower, speed, frame, mounting, voltage, and enclosure vary by catalog number, so selection requires reviewing the specific catalog number rather than a single stock SKU. The TEXP line spans 1 HP through 400 HP and is built for Class I Div. 1 Group C and D plus Class II Groups E, F, and G enclosures. The MAX-E2/841 line is specified per NEMA MG-1 Part 31 for inverter duty, covering 20:1 variable torque and 10:1 constant torque.

Technical capabilities

The rolled-steel TEFC family is rated 1/4 to 10 hp at 3600, 1800, or 1200 rpm, 230/460 V, 60 Hz, three-phase continuous duty with 1.15 service factor and Class F insulation. The TEXP explosion-proof line is TEFC, classified for Class I Div. 1 Group C and D plus Class II Groups E, F, and G, and spans 1 HP through 400 HP. The MAX-E2/841 family is an inverter-duty TEFC design meeting NEMA MG-1 Part 31 with 20:1 variable torque and 10:1 constant torque speed ranges.

Markets and applications

The three families address three distinct procurement needs: general industrial three-phase process duty at NEMA Premium efficiency, hazardous-location service where Class I Div. 1 Group C and D or Class II Groups E, F, and G ratings are mandated, and variable-frequency-drive driven applications requiring inverter-rated insulation and thermal margin under NEMA MG-1 Part 31. Round Rock, United States is the documented point of manufacture. Typical loads served include pumps, fans, compressors, conveyors, and similar three-phase industrial equipment.

Evidence limitations

Frame sizes, full efficiency values, weight, dimensions, ambient temperature ratings, and specific agency certification file numbers beyond the hazardous-location class and group designations are not publicly documented in the supplied facts. Lead time, warranty terms, distributor coverage, and pricing are not publicly documented. Any product data outside the three series listed above, including the recent North America UAV and robotics market signal, is not publicly documented as a motor specification.

Editorial summary

TECO-Westinghouse Motor Company is a United States manufacturer based in Round Rock that publishes catalog data for three AC induction motor families: TECO-Westinghouse rolled-steel TEFC NEMA Premium motors, TECO-Westinghouse TEXP NEMA Premium Efficiency explosion-proof motors, and TECO-Westinghouse MAX-E2/841 NEMA Premium inverter severe-duty TEFC motors. The documented scope covers general-purpose, hazardous-location, and inverter-driven duty ratings within a single supplier line.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Identity and location are retained from the cited official source. Product facts and visual are limited to TECO-Westinghouse rolled-steel TEFC NEMA Premium motors; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S10]Company-stated

Frequently asked questions

What AC Motor product is documented for TECO-Westinghouse Motor Company?

The retained product material names TECO-Westinghouse rolled-steel TEFC NEMA Premium motors. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published power and speed should a buyer compare?

The cited product material records: The family covers 1/4–10 hp at 3600, 1800 or 1200 rpm. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published electrical and duty should a buyer compare?

The cited product material records: The page lists 230/460 V, 60 Hz, three-phase continuous duty, 1.15 service factor and Class F insulation. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S10]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.