Manufacturer profile

Warom Technology Incorporated Company

Warom Technology Incorporated Company is a manufacturer based in Shanghai, China. [S2][S1]

Country
China [S1]
City
Shanghai [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Hazardous-area scope
The completed family is documented for Zones 1 and 2 and Zones 21 and 22. [S4]
Standards and configuration
The page identifies CENELEC, IEC and NEC classification scope and configurable installed control operators. [S5]
Warom BZC8050 stainless-steel explosion-proof control stations
Official product image [S6]

Evidence scope

The retained official product route documents: Warom documents BZC8050 as a completed stainless-steel control-station family. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S11]

Explosion Proof Control Station

Documented series: Warom BZC8050 stainless-steel explosion-proof control stations

Warom documents BZC8050 as a completed stainless-steel control-station family. [S6]

Documented specifications for Explosion Proof Control Station
MaterialAluminium [S12]
Service temperature-60°C [S13]
Hazardous-area scope
The completed family is documented for Zones 1 and 2 and Zones 21 and 22. [S4]
Standards and configuration
The page identifies CENELEC, IEC and NEC classification scope and configurable installed control operators. [S5]
  • Warom BZC8050 stainless-steel explosion-proof control stations [S6]

Selection fit: Certification and operator claims remain family and configuration scoped. [S10]

Explosion Proof Distribution

Documented series: Warom BXM(D)8061 explosion-proof distribution boxes

Warom documents BXM(D)8061 as a completed stainless-steel explosion-proof distribution-box family. [S7]

Documented specifications for Explosion Proof Distribution
MaterialStainless steel [S18]
Ingress protectionIP66 [S19]
Service temperature-20℃ [S20]
Electrical capacity
The modular multi-circuit panel is rated up to 690 VAC at 50 or 60 Hz or 500 VDC and up to 250 A. [S14]
Protection and zones
The page lists IP66, Ex db eb mb IIC and use in Zones 1, 2, 21 and 22. [S15]
  • Warom BXM(D)8061 explosion-proof distribution boxes [S7]

Selection fit: Ratings are family and configuration limits and are not collapsed into a synthetic SKU. [S16]

Explosion Proof Junction Box

Documented series: Warom BXJ8050-20/6 explosion-proof junction box

Warom documents BXJ8050-20/6 as a completed explosion-proof junction-box family. [S8]

Documented specifications for Explosion Proof Junction Box
MaterialGRP [S25]
Ingress protectionIP65 [S26]
Service temperature-20°C [S27]
Terminals and conductors
The box has six stud terminals for 0.2 to 4 square millimetre conductors and is rated up to 500 VAC and 20 A. [S21]
Protection and zones
The page lists IP65, Zones 1 and 2, and IECEx or ATEX Ex e protection. [S22]
  • Warom BXJ8050-20/6 explosion-proof junction box [S8]

Selection fit: Ratings are specific to the cited BXJ8050-20/6 family route. [S23]

Explosion Proof Light

Documented series: Warom BDD95 explosion-proof LED lighting

Warom documents BDD95 as a finished explosion-proof LED lighting family. [S9]

Documented specifications for Explosion Proof Light
Materialaluminum [S32]
StandardIEC 60079 [S33]
Service temperature-40℃ [S34]
Ingress protectionIP66 [S35]
Light and electrical characteristics
The fixture uses an LED module with 5000 K plus or minus 250 K, colour rendering index of at least 70 and 1.5 to 4 square millimetre terminals. [S28]
Environmental protection
The page lists IP66, minus 40 to plus 55 degrees Celsius operation and WF2 corrosion resistance. [S29]
  • Warom BDD95 explosion-proof LED lighting [S9]

Selection fit: The cited family is a finished hazardous luminaire; light output and electrical configuration remain model scoped. [S30]

Lighting Equipment and Electric Lamps

Documented series: Warom BDD95 explosion-proof LED lighting

Warom manufactures explosion-proof electrical equipment and LED lighting for hazardous industries. [S36]

Documented specifications for Lighting Equipment and Electric Lamps
Materialaluminum [S32]
StandardIEC 60079 [S33]
Service temperature-40℃ [S34]
Ingress protectionIP66 [S35]
  • Warom BDD95 explosion-proof LED lighting [S37]

Selection fit: Explosion-proof LED luminaires for hazardous industrial lighting applications. [S37]

Product range and documented series

Warom documents BZC8050 as a completed stainless-steel control-station family. [S6]

  • Warom BZC8050 stainless-steel explosion-proof control stations [S6]Source note: Warom BZC8050 stainless-steel explosion-proof control stations
  • Warom BXM(D)8061 explosion-proof distribution boxes [S7]Source note: Warom BXM(D)8061 explosion-proof distribution boxes
  • Warom BXJ8050-20/6 explosion-proof junction box [S8]Source note: Warom BXJ8050-20/6 explosion-proof junction box
  • Warom BDD95 explosion-proof LED lighting [S9]Source note: Warom BDD95 explosion-proof LED lighting

Procurement fit

Procurement specifications should reference the cited family designations rather than consolidated SKUs. The BZC8050 control station family supports configurable installed control operators with CENELEC, IEC and NEC classification scope. The BXM(D)8061 distribution family is rated up to 690 VAC at 50 or 60 Hz or 500 VDC and up to 250 A as a modular multi-circuit panel, with ratings described as family and configuration limits. The BXJ8050-20/6 junction box carries ratings specific to that family route, while the BDD95 LED luminaire is documented as a finished hazardous fixture with model-scoped output and electrical configuration.

Technical capabilities

Stainless steel is documented across the BZC8050 control station family, BXM(D)8061 distribution boxes, BXJ8050-20/6 junction boxes, and BDD95 LED lighting. Distribution panels list IP66, Ex db eb mb IIC, and Zones 1, 2, 21 and 22. Junction boxes list IP66, IP65, Zones 1 and 2, and IECEx or ATEX Ex e protection, with six stud terminals for 0.2 to 4 square millimetre conductors rated to 500 VAC and 20 A and 80°C service. The BDD95 fixture specifies 5000 K plus or minus 250 K, colour rendering index of at least 70, 1.5 to 4 square millimetre terminals, IP66, minus 40 to plus 55 degrees Celsius operation, and WF2 corrosion resistance.

Markets and applications

Documented hazardous-area scope covers Zones 1 and 2 and Zones 21 and 22. The BZC8050 control station family carries CENELEC, IEC and NEC classification scope, with configurable installed control operators. The BXM(D)8061 distribution family is documented for modular multi-circuit power distribution in hazardous areas. The BXJ8050-20/6 junction box is documented for IECEx or ATEX Ex e protected wiring termination. The BDD95 LED lighting is documented for hazardous industrial lighting applications, with environmental operating range from minus 40 to plus 55 degrees Celsius and WF2 corrosion resistance.

Evidence limitations

Common buying fields not publicly documented include specific photometric output values for the BDD95 LED fixture, individual operator part numbers for the BZC8050 control station, mechanical dimensions and weights for each documented series, ATEX or IECEx certificate numbers, ambient temperature derating curves, photometric distribution files, and warranty terms. Lead times, pricing, authorized distributor networks, and stock configurations are also not publicly documented within the cited facts.

Editorial summary

Warom Technology Incorporated Company is documented in Shanghai, China, with product coverage across explosion proof control station, explosion proof distribution, explosion proof junction box, explosion proof light, and lighting equipment and electric lamps categories. Documented series include the BZC8050 stainless-steel control stations, BXM(D)8061 distribution boxes, BXJ8050-20/6 junction boxes, and BDD95 explosion-proof LED lighting. The documented range covers configurable control operators, modular distribution panels, and finished hazardous luminaires intended for industrial specifications.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Identity and location are retained from the cited official source. Product facts and visual are limited to Warom BZC8050 stainless-steel explosion-proof control stations; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S11]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to Warom BXM(D)8061 explosion-proof distribution boxes; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S17]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to Warom BXJ8050-20/6 explosion-proof junction box; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S24]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to Warom BDD95 explosion-proof LED lighting; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S31]Company-stated

Frequently asked questions

What Explosion-Proof Lighting product is documented for Warom Technology Incorporated Company?

The retained product material names Warom BZC8050 stainless-steel explosion-proof control stations. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published hazardous-area scope should a buyer compare?

The cited product material records: The completed family is documented for Zones 1 and 2 and Zones 21 and 22. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published standards and configuration should a buyer compare?

The cited product material records: The page identifies CENELEC, IEC and NEC classification scope and configurable installed control operators. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S11]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.