A Hilti PRO Gas Concrete Saw 14-inch rental is listed at $86 per day, $344 per week, and $1,032 for four weeks [S1].
Published 2026 planning ranges place handheld cut-off saws at $70–$130 per day and walk-behind 14-inch to 18-inch saws at $90–$180 per day, before blade, delivery, fuel, or damage charges.
What Determines the Cut-Off Saw Daily Rate?
The daily rate starts with machine class, blade diameter, power source, and rental duration. A 14-inch gas saw is a common starting point: Home Depot lists $60 for four hours, $86 per day, $344 per week, and $1,032 for four weeks [S1]. A1 Rentals lists a 14-inch handheld gas model at $60 for four hours, $100 per day, $375 per week, and $1,050 per month [S6].
The Hilti PRO Gas Concrete Saw 14-inch four-week rate of $1,032 is $344 higher than four weekly charges of $344 [S1]. Compare the complete rate table rather than multiplying the day rate by seven, because the rental operator applies its own weekly and monthly breakpoints.
Location also changes the quote. These are local comparisons, not universal national tariffs.
Handheld Versus Walk-Behind Concrete Saw Pricing
Handheld cut-off saws suit controlled cuts, limited access, and short sections, with a 2026 Raleigh range of $70–$130 per day, $240–$450 per week, and $700–$1,300 per month [S5]. Walk-behind 14-inch to 18-inch floor and street saws are priced at roughly $90–$180 per day, $240–$560 per week, and $720–$1,600 per month [S5].
The cut-off saw is not the same equipment class as a handheld circular saw used for wood or sheet goods. Rental pricing follows abrasive-blade capacity, engine power, wet-cutting provisions, and the depth required by the concrete section, not the generic “saw” label.
Electric, Gas, and Specialty Saw Options

Electric concrete saws occupy the lower end of the daily market in some listings, while gas saws dominate published handheld pricing examples. A 2026 rental-cost guide places a handheld electric concrete saw for light residential work near $60 per day and gives an overall daily range of $60–$350 [S8]. Another 2026 market estimate places concrete saws at $50–$200 per day, $160–$720 per week, and $425–$1,900 per month [S9].
Specialty classification can raise the rate. Herc also lists an energy-efficient concrete cutoff saw with a cutting capacity of up to 4-3/4 inches [S2].
Electric and gas saws should be compared by operating duration and site conditions, not only sticker price. A $60 electric rental can become expensive if battery charging, extension leads, wet-cutting supply, or limited runtime interrupts the work. A gas saw may fit a full-shift application better, while fuel and exhaust controls still need to fit the work area.
What Is Excluded From the Advertised Day Rate?
The advertised rental price may not include the diamond blade, slurry containment, HEPA dust collection, delivery, fuel, or off-rent charges. The Raleigh planning ranges do not assume that the diamond blade is included, and contractors are advised to align blade policy [S5]. A published rental clock may also run for 24 hours rather than one 8-hour shift [S5].
Delivery and return rules deserve equal attention to the day rate. United Rentals offers online and app rental rates, but the final pickup or delivery location, equipment class, and contract terms still determine the payable amount [S3]. Sunbelt Rentals directs customers to obtain a quote for rates and availability rather than presenting one universal concrete-saw price [S7].
Ask for four figures in writing: equipment subtotal, blade charge, delivery fee, and applicable taxes or protection products. Confirm whether the blade is included and whether wear on a supplied blade is billed separately. The A1 listing shows that even a straightforward 14-inch gas saw can move from $60 for four hours to $100 for one day, so the rental duration code is part of the rate calculation [S6].
Choosing the Rental Duration for a Cut

A four-hour rental is the lowest-cost option for a single isolated cut. Home Depot lists the 14-inch gas saw at $60 for four hours, compared with $86 per day and $344 per week [S1]. A1 lists the same four-hour duration at $60 for its 14-inch handheld gas category [S6]. For one defined cut, this can reduce machine time without paying for a full day.
Weekly pricing becomes relevant when the job extends across several working days. Home Depot’s $344 weekly rate is 4.3 times the $86 day rate [S1]. A $375 weekly rate equals approximately $53.57 per day, or 0.536 times a $100 daily rate [S6]. Four-week and monthly pricing can reduce the effective daily cost further, but the rental operator’s clock, extension rules, and return condition requirements determine whether that rate remains valid for the full project.
Higher hourly or daily charges can reflect a different machine specification, service model, or included equipment package, so they should not be compared by label alone.
Contractor Cost Control for Concrete and Masonry Work
A defensible rental budget begins with the physical cut: slab thickness, cut length, number of expansion joints, and access. Raleigh planning guidance uses a 4-inch to 6-inch driveway slab as the reference condition and notes that production can be constrained by access, layout, and dust or slurry controls rather than saw availability [S5].
Concrete jobs also create water, slurry, dust, and cleanup obligations. The technical distinction between wet and dry cutting is covered in Wet vs Dry Cut-Off Saw Dust Control, including the operating choices that affect rental accessories and site setup.
For procurement, compare the same scope across at least three offers: a $95 per day and $380 per week Home Depot rate, a $100 per day and $375 per week A1 rate, and local supplier quotes around $150–$165 per day in Raleigh [S1][S5][S6]. Track the quoted blade diameter, rental-clock definition, delivery charge, and weekly discount. The lowest daily number is not necessarily the lowest installed job cost.