A 10% compounded annual return would turn one unit of last-time purchase stock into 2.59 units over 10 years, before tax, inflation and operating costs [S1].
The result depends on purchase timing, holding period, dividend reinvestment and whether the capital must fund product support, so market history is an input rather than a budget guarantee [S1][S2].
What Last-Time Purchase Stock Actually Covers
Last-time purchase stock is inventory bought before an installed product reaches end of life. Its useful value is the cash it releases or avoids needing when the product is retired, after accounting for warehousing, obsolescence, handling and any disposal or replacement cost. [S1]
A simple coverage test divides the quantity of long-lead spares or critical materials by the annual consumption rate. For example, 30 units divided by 3 units per year provides 10 years of coverage; 20 units divided by 3 units per year provides only 6.7 years.
For a 10-year product life, the minimum theoretical purchase quantity equals annual usage multiplied by 10 years. A 2-unit annual demand therefore requires 20 units of ideal coverage, while a 4-unit annual demand requires 40 units.
The same calculation must account for shared inventory. If several product families consume the same bearing, seal, valve or electronic module, the stock should be assigned across all compatible installations rather than duplicated for each product line. Detailed long-lead motor spares calculations can provide a useful model for this allocation.
Return Scenarios Over the 10-Year Holding Period
Compounding changes the outcome materially. At 5%, $1,000 becomes $1,629; at 10%, it becomes $2,594; and at 15%, it becomes $4,046 over 10 years. [S1]
Historical S&P 500 annualized total return, including reinvested dividends, was 15.345% over the 10 years ending August 2026 [S2].
The 9.596% figure is the S&P 500 annualized return with dividends reinvested over 150 years [S2]. The 14.8% figure is the S&P 500 average 10-year return from January 2016 through December 2025 [S3]. These are historical observations, not forecasts or purchase guarantees.
Which Return Measure Fits the Decision

Nominal total return includes price changes and reinvested dividends, while inflation-adjusted return measures purchasing-power growth. For obsolete industrial inventory, nominal value matters for cash recovery, but replacement affordability depends on future price levels. [S1]
Simple average and compound return answer different questions. The simple arithmetic mean of the S&P 500 annual total returns from 2016 through 2025 was 15.9%, while the result of holding the index through the full period is a compound return [S1].
The 100-year S&P 500 annualized return with dividends reinvested was 10.487%, or 7.27% after inflation adjustment [S2].
Volatility Makes a Fixed 10-Year Assumption Fragile
Annual equity returns are not stable. S&P 500 total returns from 2016 through 2025 ranged from an 18.11% loss in 2022 to a 31.49% gain in 2019 [S1]. A stock purchase made near the low point could lose substantial value before reaching the product retirement date.
One negative year does not determine a 10-year result, but it materially changes the path.
For engineering inventory, that distinction matters because the required stock quantity cannot be reduced simply because a holding period has passed.
Who Should Use Last-Time Purchase Stock

Last-time purchase stock fits products with a defined service life, high replacement lead time, stable long-term demand and limited shelf life. It is also relevant when obsolescence risk is lower than the cost of an unplanned outage or replacement after manufacturing ends. [S1]
It does not fit consumables with frequent demand, fast-moving electronic components, parts subject to rapid design changes or inventory whose holding cost exceeds its expected financial benefit. The required quantity should be based on installed-base consumption, not one product model in isolation.
For example, a plant with 40 identical drives consuming 2 spare motors each year over a 10-year life would require 20 motors, excluding a separate criticality allowance. If each motor costs $8,000, the inventory commitment is $160,000 before freight, storage and inspection.
How to Set the Purchase Quantity
Start with 10 years of verified consumption, then deduct stock already held that remains usable. The result is the additional purchase quantity. For annual demand of 3 units, 10 years of demand equals 30 units; after deducting 8 usable units on hand, the additional requirement is 22. [S1]
Apply a criticality factor only through an approved logic model. A noncritical consumable may use exactly 10 years of demand, while a sole-source item supporting continuous production may require a defined allowance beyond basic life coverage. The material support documents should specify the rule rather than leaving it to purchasing intuition.
The financial test is the difference between the carrying cost of the stock and the expected loss from not having it. Carrying costs include capital, storage, insurance, inspection, preservation and obsolescence. Avoided costs include emergency freight, production interruption, expedited manufacturing and loss of the replacement opportunity.
For broader capital planning, an OFCI and OFE equipment strategy for data center pre-purchase can help separate equipment bought for immediate installation from stock reserved for a later replacement cycle.
Risks and Decision Triggers

The main failure mode is treating a historical market return as a guaranteed funding rate. Chase states that the historical average does not reflect future success and that a 16% annual average does not mean the market earned exactly 16% every year [S1].
The second failure mode is confusing shareholder wealth with investable performance. The 15 largest individual wealth-creating stocks generated an estimated $27.0 trillion in shareholder wealth from 2016 through 2025, while the Magnificent Seven accounted for about $20.6 trillion, or roughly three-quarters of that total [S4].
Those figures reflect changes in market capitalization plus dividends paid for selected companies [S4]. They are not portfolio returns available to an industrial buyer and should not be used to value a stock of replacement components.
A practical decision rule is to approve last-time purchase stock only when all four checks are documented: 10 years of demand are supported by installed-base data, no compatible existing stock can satisfy the requirement, the total carrying cost is quantified, and the consequence of shortage has been valued.
Track the retirement schedule, annual consumption, supplier production status and residual shelf life each quarter. Escalate the purchase when projected coverage falls below 10 years, supplier lead time exceeds the remaining coverage period, or an engineering change removes compatibility.
The financial return is secondary to physical availability: at 10%, the value can double over 10 years, but the useful result is cash preserved without an outage [S1].