Manufacturer profile

CIRCUTOR, SAU

CIRCUTOR, SAU is a manufacturer based in Viladecavalls, Spain. [S2][S1]

Country
Spain [S1]
City
Viladecavalls [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Current connection
CEM-D311 is designed for 5 A or 1 A current-transformer secondary input. [S4]
Accuracy and communication
It lists active-energy class 1 or MID B, reactive-energy class 2, and Modbus RS-485 or M-Bus variants. [S5]
CIRCUTOR CEM-D311 / Q23611 energy meter
Official product image [S6]

Evidence scope

The retained official product route documents: CIRCUTOR documents CEM-D311 / Q23611 as an indirect three-phase energy meter. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S11]

Electricity Meter

Documented series: CIRCUTOR CEM-D311 / Q23611 energy meter

CIRCUTOR documents CEM-D311 / Q23611 as an indirect three-phase energy meter. [S6]

Documented specifications for Electricity Meter
StandardEN 50470 [S12]
Current rating40A [S13]
Current connection
CEM-D311 is designed for 5 A or 1 A current-transformer secondary input. [S4]
Accuracy and communication
It lists active-energy class 1 or MID B, reactive-energy class 2, and Modbus RS-485 or M-Bus variants. [S5]
  • CIRCUTOR CEM-D311 / Q23611 energy meter [S6]

Selection fit: Communications depend on the exact variant; the current CEM-D311 replaces the excluded discontinued CEM-C31 route. [S10]

Harmonic Filter

Documented series: CIRCUTOR AFQm-4WF-075M-400 / R7RMAF active harmonic filter

CIRCUTOR documents R7RMAF as an exact four-wire wall-mounted active harmonic filter. [S7]

Voltage and current
The exact model is rated 230–400 V and 75 A per phase, with 150 A peak and 225 A neutral ratings. [S14]
Harmonic scope
The product page specifies compensation through the fiftieth harmonic. [S15]
  • CIRCUTOR AFQm-4WF-075M-400 / R7RMAF active harmonic filter [S7]

Selection fit: All ratings are exact-model scoped and must not be generalized to every AFQm variant. [S16]

Multifunction Power Meter

Documented series: CIRCUTOR CVM-C11 / M58541 fixed power analyzer

CIRCUTOR documents M58541 as an exact CVM-C11 fixed power analyzer. [S8]

Documented specifications for Multifunction Power Meter
Current rating5 A [S22]
Form and measurement
The 96 by 96 mm panel analyzer has four measurement channels including neutral and reports harmonics through the thirty-first order. [S18]
Inputs and protocol
The exact unit accepts 1 A or 5 A inputs and provides RS-485 with Modbus RTU or BACnet. [S19]
  • CIRCUTOR CVM-C11 / M58541 fixed power analyzer [S8]

Selection fit: All ratings and interfaces remain M58541 scoped; older CVM-C10 references are not retained. [S20]

Reactive Power Compensation

Documented series: CIRCUTOR OPTIM 9 P&P-255-440 automatic capacitor bank

CIRCUTOR documents R3L340 as an exact OPTIM 9 P&P automatic capacitor bank. [S9]

Capacity and switching
The nine-step contactor-switched bank is rated 211 kvar at 400 V and 255 kvar at 440 V, 50 Hz. [S23]
Cabinet and dimensions
The floor-mounted IP21 cabinet measures 700 by 1350 by 440 mm and weighs 98 kg. [S24]
  • CIRCUTOR OPTIM 9 P&P-255-440 automatic capacitor bank [S9]

Selection fit: Every rating is exact-model scoped; the registered address is not asserted as the production site. [S25]

Product range and documented series

CIRCUTOR documents CEM-D311 / Q23611 as an indirect three-phase energy meter. [S6]

  • CIRCUTOR CEM-D311 / Q23611 energy meter [S6]Source note: CIRCUTOR CEM-D311 / Q23611 energy meter
  • CIRCUTOR AFQm-4WF-075M-400 / R7RMAF active harmonic filter [S7]Source note: CIRCUTOR AFQm-4WF-075M-400 / R7RMAF active harmonic filter
  • CIRCUTOR CVM-C11 / M58541 fixed power analyzer [S8]Source note: CIRCUTOR CVM-C11 / M58541 fixed power analyzer
  • CIRCUTOR OPTIM 9 P&P-255-440 automatic capacitor bank [S9]Source note: CIRCUTOR OPTIM 9 P&P-255-440 automatic capacitor bank

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Identity and location are retained from the cited official source. Product facts and visual are limited to CIRCUTOR CEM-D311 / Q23611 energy meter; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S11]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to CIRCUTOR AFQm-4WF-075M-400 / R7RMAF active harmonic filter; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S17]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to CIRCUTOR CVM-C11 / M58541 fixed power analyzer; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S21]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to CIRCUTOR OPTIM 9 P&P-255-440 automatic capacitor bank; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S26]Company-stated

Frequently asked questions

What Electricity Meter product is documented for CIRCUTOR, SAU?

The retained product material names CIRCUTOR CEM-D311 / Q23611 energy meter. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published current connection should a buyer compare?

The cited product material records: CEM-D311 is designed for 5 A or 1 A current-transformer secondary input. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published accuracy and communication should a buyer compare?

The cited product material records: It lists active-energy class 1 or MID B, reactive-energy class 2, and Modbus RS-485 or M-Bus variants. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S11]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.