AdditivePlus lists 39 LPBF metal powders priced from $270 per 10 kg.
The AdditivePlus catalog covers stainless steel, nickel superalloys, titanium, aluminum, tool steel and cobalt-chrome powders, with products priced per 10 kg.
Public price benchmark for AM powder in 2026
Particle-size distribution is therefore a visible price variable, not a minor packaging detail.
AdditivePlus states that CNPC Powder and A-Powder cost less per kilogram and offers Ti-6Al-4V Grade 23 in US stock.
For context, a 2023 buyer guide placed titanium powder at $170–230/kg, nickel and cobalt alloys at $80–100/kg, and aluminum or stainless steel at $40–50/kg, but that older range should not be used as a 2026 quotation [S6].
Steel, titanium and nickel options compared
For 316L stainless steel, corrosion resistance, particle-size control, documentation and machine qualification matter more than matching the lowest commodity price.
Titanium combines higher powder cost with a narrower operating envelope. Buyers of titanium alloy should compare Grade 23 ELI with Grade 5 by certification, chemistry, powder-flow requirements and machine-specific process qualification, not by price per kilogram alone [S4].
Nickel is not a single market. AdditivePlus lists nickel superalloys among its LPBF powder categories. The selection basis for nickel alloy includes service temperature, cracking tendency, post-print heat treatment and qualification history [S4].
Pricing drivers behind the per-kilogram spread

Raw alloy value is only the first cost driver. Titanium feedstock, nickel alloy chemistry, stainless steel grade, atomization route, particle-size distribution and production volume all affect the delivered price. The 43% gap between the listed Chinese Ti-6Al-4V Grade 23 ELI product and its US-made comparison shows how origin and sourcing can change procurement cost without changing the nominal alloy name [S1].
Volume is the next commercial lever. AdditivePlus prices its LPBF metal powders per 10 kg. A lower per-kilogram rate at production scale can outweigh a small apparent discount from a laboratory-sized purchase.
Traceability and lot control can add cost but reduce production risk. The supplier offers certificates of analysis on request, identifies country of origin on every product and supports custom-alloy atomization [S1]. Buyers should require the same chemistry, particle-size distribution, morphology, oxygen content, flow behavior and lot traceability needed by their qualified machine and material specification [S4].
Who should buy by kilogram and who should qualify by value
Per-kilogram pricing is suitable for prototyping, machine trials, coupons and small development batches where material risk remains limited. It is less useful for production aerospace, medical or defense parts, where the powder-machine-part combination is qualified and a price change may affect scrap, rework and release schedules [S3].
This approach is not appropriate for conventional powder-metallurgy components bought in tonnes. The global atomized metal powder market was estimated at USD 5.78 billion in 2025 with sales of approximately 1.15 million metric tonnes, and iron plus low-alloy steel powders represented 72.2% of consumption [S2]. Those figures describe a much broader market than premium LPBF feedstock.
AM buyers should separate the raw powder price from the delivered manufacturing cost. Installation and qualification time, printer energy, support material, powder carryover, recycling cycles, post-processing and inspection can dominate the apparent metal cost per part. The metal-powder AM market was valued at USD 650.8 million in 2025 and projected at USD 813.8 million for 2026, with 15.4% compound growth projected through 2035 [S3].
Total cost moves beyond the powder invoice

A low purchase price can produce a high cost per accepted part if the powder causes poor spreading, unstable melt-pool chemistry or a failed qualification cycle. Conversely, a qualified lot with a higher invoice price can lower total production cost by supporting repeatable density, reduced rework and predictable machine operation [S3].
Every kilogram consumed should be evaluated against usable part mass, support consumption, internal powder reuse limits, reclamation loss and final inspection. Aerospace and medical buyers must also price certification and change control into the sourcing decision, because qualification converts powder from a broadly interchangeable input into a controlled production variable [S3].
The commercial effect of scale is also visible in the wider market. The global powder metallurgy market was estimated at USD 3.68 billion in 2026, while steel was expected to represent 47.5% of that market in 2026 and aerospace and defense 31.8% [S5]. Those segment figures do not set AM powder prices, but they confirm that commodity steel and qualified aerospace supply are separate purchasing environments.
Sourcing evidence to request before comparing quotes
Request a quotation on a common basis: alloy designation, grade, process route, particle-size distribution, powder quantity, packaging, country of origin, delivery terms, certificate of analysis, safety data sheet and reuse policy. A quote is comparable only when these fields match, because the sampled 316L price varied from $41.50/kg to $68.00/kg across particle-size bands [S1].
The technical library identifies LPBF, EBM, DED, binder jet, MIM and powder-metallurgy HIP as processes with different powder requirements, and it provides dedicated comparisons for Ti64 versus commercial-purity titanium and IN718 versus IN625 [S4]. These process distinctions determine whether a quoted powder is technically eligible before price becomes the deciding factor.
For production parts, require lot traceability and an approved supplier-quality plan. Qualification records should connect chemistry, particle-size distribution, reuse protocol, machine parameters, post-processing and inspection [S3]. For alloy steel programs, also compare the specific grade, such as 17-4PH, H13 or maraging M300, against strength, corrosion and heat-treatment requirements.
How to set a defensible 2026 budget

Use $27.00–68.00/kg as the sampled stainless-steel budget band, $94.50/kg as the maraging M300 reference point and $136.00/kg as the listed Ti-6Al-4V Grade 23 ELI reference point [S1]. These are public product prices, not universal market averages, and they exclude qualification, freight, taxes, machine time and post-processing unless explicitly quoted.
For budget approval, model three supplier cases: a low-cost regional source, a documented option with a certificate of analysis, and a qualified premium source. Apply volume quotations at 100 kg-plus, define allowable carryover and recycling loss, and add the cost of delayed builds, rejected powder and inspection. The October 2026 market framework identifies Ti64, IN718, 17-4PH, AlSi10Mg and CuCrZr as candidate materials for qualified flight-ready spares [S4].
Two signals will affect 2027 purchasing: whether volume quotations close the visible gap between regional and US-made titanium, and whether aerospace contracts convert qualification demand into recurring powder volume. Tekna reported titanium powder orders exceeding CAD 3 million from a US defense contract manufacturer in July 2026, more than six times its 2025 demand, while the wider atomized-powder market remains led by ferrous volume [S5][S2].