The comparison covers component cost, load capacity, motion functions, alignment, and applications for a ball spline versus a keyed shaft with a linear bearing.
Cost difference and functional scope
A ball spline is a recirculating-ball linear guide with grooves formed in the shaft and matching raceways in the nut. It combines linear motion with torque transfer or anti-rotation, and a rotary version can provide linear and rotary motion on one axis [S2][S4]. A keyed shaft uses a separate key and matching keyway to transmit torque between a shaft and hub; the shaft key does not itself provide a recirculating linear guide.
The ball-spline assembly normally has the higher purchase price because it includes a grooved shaft, precision nut, rolling elements, recirculation paths, and more demanding tolerances. The keyed-shaft option normally combines a plain shaft, one or more linear bushing supports, a key, and a keyed hub. That does not establish a universal price ratio because shaft diameter, length, nut count, accuracy class, seals, lubrication, and machining all alter the quotation.
The functional comparison is direct: a ball spline provides guided linear travel plus torque transmission, a rotary ball spline adds controlled rotation, and a keyed shaft with bushings provides guided travel and torque transmission only when the key and hub are engaged. A plain keyed shaft with no bushing does not provide the same guided-motion function [S2][S4][S5].
Load capacity and mechanical performance
An NB Corporation discussion states that ball splines provide higher load capabilities and combines a linear bushing capable of handling greater moment loads with a shaft that can be rotated when needed [S3].
The higher capacity comes from the larger rolling-element contact area provided by the shaft grooves and spline raceways. Typical configurations contain two to six grooves, with four grooves being a common compact arrangement. Two-point and four-point gothic-arch contact are available, with the four-point design used on larger sizes to increase load capacity and moment-load rigidity [S3].
A keyed shaft transfers torque through the sides of one key and keyway, while a splined shaft distributes circumferential force among multiple teeth or ridges. Splined shafts generally tolerate repeated engagement better than keyed joints, which are more susceptible to wear [S5]. The design conclusion is conditional: select a ball spline when moment loading, shock, alignment sensitivity, or operating life justify its added cost; retain the keyed arrangement when the hub is comparatively permanent, load and speed are modest, and cost is dominant.
Comparison by decision criterion

Cost: the keyed shaft with a linear bushing is the lower-cost arrangement when it can meet the duty cycle, while the ball spline adds precision rolling components and tighter geometry [S2][S5]. NB Corporation states that ball splines provide higher load capabilities and combines a linear bushing capable of handling greater moment loads with a shaft that can be rotated when needed [S3].
Motion integration: the standard ball spline offers linear travel with torque transfer or anti-rotation, and the rotary ball spline combines linear travel with rotary motion. The keyed shaft provides torque transfer through a separate keyed hub, while the linear bushing provides the sliding support [S2][S4]. Footprint and assembly: one inherently anti-rotating ball spline can replace two parallel shafts, reducing footprint, weight, alignment work, and assembly count. A conventional keyed-shaft arrangement can also use one shaft, but it needs a suitable anti-rotation method unless the key itself performs that function [S2].
Lifetime and maintenance: splined interfaces generally resist wear better than keyed interfaces, while a keyed joint is more appropriate for a relatively permanent connection [S5]. Ball-spline selection still requires attention to groove count, nut length, raceway geometry, shaft rigidity, mounting, contamination, lubrication, seals, and the manufacturer's rating method [S3].
Best-fit applications
A ball spline fits applications requiring simultaneous linear motion and torque transfer, including robotics, inspection, spinning, loading, coating, wire winding, grinding, indexing, die setting, transfer, molding, measuring, welding, riveting, printing, packaging, filling, and pressing [S3]. Rotary ball splines are suited to Z-theta axes in SCARA robots, CNC automatic tool changers, and pick-and-place systems where vertical travel and rotation must be coordinated [S2].
One ball spline can support a non-rotating carriage where two linear shafts would otherwise be needed to prevent rotation, such as a paper spool moving horizontally [S2]. A rotary ball spline can also extend a vertical robot axis when a rigid ball-spline construction provides a practical mechanical solution [S7].
A keyed shaft with a linear bushing is the better candidate for low-cost handling slides, light-duty feed rails, simple jigs, and applications with a permanent keyed hub, modest speed, and no requirement for rotary-axis integration. The splined interface remains more appropriate than a key where repeated axial engagement, higher rotational speed, shaft balance, and reliable torque delivery matter [S5].
Constraints and failure modes

Ball splines are not cost-minimized substitutes for every slide. A keyed shaft and bushing may meet the actual load with greater economy, while a ball spline can be over-specified when only linear travel is required. Conversely, a plain bushing arrangement may be unsuitable when the shaft must resist torque, maintain alignment under moment load, or survive repeated service [S1][S2][S5].
Six-groove shafts can leave insufficient space for ball recirculation beside the nut's active paths, requiring the nut to protrude from the shaft. Balls can also fall from the nut if shaft and nut are separated, so six-groove systems demand greater handling care [S3]. Four-groove systems permit side-by-side active and return paths and remain more compact when the required load does not justify six raceways [S3].
Keyed joints are prone to attrition, while splined interfaces distribute circumferential force more evenly and generally improve service life [S5]. Ball-spline systems still depend on correct preload, lubrication, sealing, contamination control, mounting stiffness, and alignment; none of those should be hidden behind a general load-capacity comparison. For a dedicated comparison of the motion functions, see Ball Spline vs Linear Bushing for Combined Motion.
Specification sequence for purchase approval
Specify the ball spline when the mechanism must translate, transmit torque, or combine translation with rotation; specify the keyed shaft with bushings when the application is a simple, low-duty slide with a permanent keyed connection. Compare total installed cost rather than unit price, including the number of shafts, supports, keys, hubs, anti-rotation hardware, alignment effort, lubrication, seals, and expected replacement interval [S2][S5].
For a ball spline, require the supplier to state shaft diameter, overall length, nut length, groove count, contact geometry, dynamic and static ratings, permissible moment loads, rotational capability, lubrication and seal arrangement, mounting provisions, and applicable accuracy limits. The available engineering data show that groove count, groove shape, nut length, raceway tolerances, shaft rigidity, and mounting method all affect capacity and life [S3].
For a keyed-shaft design, document shaft diameter, key type, key dimensions, hub length, axial retention, radial load, torque, speed, duty cycle, alignment, lubrication, and the bushing's own load and accuracy limits. Use the lower-cost configuration only after checking the moment load and alignment requirement against the actual bushing rating. The decisive signal is simple: specify the ball spline when its 5-to-12-times dynamic-rating advantage or combined-motion capability is required, not merely because it is a more sophisticated component [S1][S3].