Compare ANSI Class A and Class B first aid kits by hazard level, minimum contents, population coverage, and listed prices from $99.99 for a 50-person Class B kit to $672.99 for a portable trauma backpack [S2][S8].
Class A covers common workplace injuries in lower-risk settings, whereas Class B adds a splint and tourniquet and deeper quantities of common supplies for industrial, construction, chemical-processing, warehouse, or other higher-risk environments [S1][S3][S6].
Class A vs Class B: Cost and Capability
Class A is the economical choice for offices, retail operations, and other relatively low-risk workplaces, while Class B costs more because it contains additional trauma equipment and larger quantities of core supplies [S5][S7]. The available price evidence spans a 50-person Class B kit at $99.99, a Class B basic kit at $209.55–$229.55, a large four-shelf Class B cabinet at $350.07, and a Class B trauma backpack priced as low as $672.99 [S2][S4][S8].
A direct price judgment requires matching product format, capacity, enclosure, and contents. A $99.99 wall-mountable Class B kit and a $350.07 four-shelf cabinet are not equivalent products: the cabinet measures 14.87 × 21.75 × 5.5 inches and has a steel enclosure, full-length hinge, dual latches, and a 611-piece count without tablets or 761 pieces with them [S4][S8]. The Trauma and First Aid Backpack Kit - Class B is described as a basic Class B backpack kit.
Class B offers better trauma capability, but Class A is the rational purchase where the hazard assessment identifies only common workplace injuries. Class B is the stronger specification where the operational environment includes machinery, heavy equipment, construction exposure, chemical handling, or a larger workforce [S3][S6][S9].
Class Selection by Workplace Hazard
ANSI/ISEA Z308.1-2021 uses injury likelihood, injury severity, and workplace hazards to classify kits. Class A 21 is described as having at least 16 item types and 60 individual pieces for common injuries such as minor cuts, scrapes, and light burns.
Class B adds two identifiable components to the Class A inventory: a structural or body splint and a tourniquet for bleeding control [S1]. This addition changes the practical use case. A small Class A kit can support routine wound care, while a Class B kit provides equipment intended to stabilize more serious injuries until emergency personnel arrive [S3].
Class A is generally suitable for corporate offices, standard retail spaces, and climate-controlled administrative workplaces where the injury profile is relatively routine [S3]. Class B fits heavy manufacturing plants, active construction sites, industrial warehouses, and chemical-processing facilities, where injury severity, employee density, or machinery exposure is greater [S3][S6].
Contents, Capacity, and Stocking Burden

These are minimum content thresholds, not recommended stocking levels for every facility.
Large industrial products can exceed those thresholds substantially. The four-shelf Class B cabinet includes 100 sheer strip bandages and other supplies. The Class B cabinet is described as suitable for manufacturing facilities, warehouses, construction sites, and other workplaces with larger teams.
Overfilling can create two costs: a higher purchase price and more frequent replenishment checks. The four-shelf cabinet supports organized inspection and restocking, while the smaller 50-person Class B product is listed as wall-mountable and weatherproof [S4][S8]. The detailed selection of eyewash provisions in chemical workplaces is covered in Choose Eye Wash Pods Correctly for Chemical Splash Kits.
Purchase Price and Product Format
Class B products span several price points because classification alone does not define enclosure, mobility, capacity, or trauma accessories. A 50-person ANSI Class B first aid kit is described as wall mountable with a weatherproof case, and a separate Class B basic kit is available. The large Class B product includes a four-shelf steel cabinet and a wider assortment of first aid supplies.
The Class B trauma backpack is listed as a basic product. For mobile response or vehicle deployment, this format costs more than a basic wall kit but changes access and carrying practice.
The most defensible price comparison is therefore like-for-like: compare Class A against Class A and Class B against Class B, then normalize by the number of people served, enclosure, included trauma products, and replenishment model. A lower purchase price does not establish the lower lifecycle cost if quantities are too small, a second kit is required, or restocking labor is omitted from the calculation.
Standards, Compliance, and Common Errors

ANSI/ISEA Z308.1-2021 establishes minimum performance and content requirements for workplace first aid kits, and OSHA 29 CFR 1910.151 requires adequate first aid supplies to be readily available; it does not automatically prescribe one ANSI class for every employer [S3][S5]. The employer must evaluate hazards, employee needs, and applicable regulations when choosing the class and quantity [S5].
ANSI/ISEA Z308.1-2026 retains the Class A and Class B framework, with Class B including the Class A inventory plus a splint and tourniquet [S1]. A purchaser's compliance claim should therefore be checked against the edition stated on the product label, especially when procurement documents specify Z308.1-2021 or a newer edition [S1][S3].
Two purchasing errors are common. First, a Class B label does not establish suitability for a particular workplace without a hazard assessment. Second, a large piece count does not prove that critical items are present in usable quantities or remain unexpired [S3][S4]. The 611-piece cabinet count excludes the cabinet, mounting hardware, and labels, and counts individual packets, wipes, bandages, and tablets separately [S4].
Recommended Configurations by Use Case
For an office, retail store, or administrative area with common hazards, choose a Class A kit sized for the number of workers and verify that it contains the required minimum assortment [S3][S5]. For a manufacturing plant, construction site, warehouse, or chemical-processing facility, choose Class B and include sufficient quantities for the population and injury profile rather than selecting the lowest advertised price [S3][S6].
For a mobile response team, compare a $672.99-class backpack with a conventional wall kit using carrying mode, vehicle storage, bleeding-control configuration, and accessory compatibility as the criteria [S2]. For a fixed workplace serving 50–100 people, a four-shelf Class B cabinet at $350.07 provides a defined format, 611 or 761 pieces depending on tablets, and a 14.87 × 21.75 × 5.5-inch steel enclosure [S4].
Inventory checks should confirm the presence and serviceability of the splint, tourniquet, wound dressings, burn supplies, eye-care provisions, and personal protective equipment [S1][S4]. The first aid kit selection should be documented alongside the workplace hazard assessment, required staffing coverage, and replenishment interval.
Track three procurement signals before approval: the quoted price for a specified Class A or Class B configuration, the stated edition of ANSI/ISEA Z308.1 on the product label, and the documented coverage or replenishment plan. These checks make the final price comparable and expose kits that are inexpensive at purchase but understocked for the intended workforce.