REQUEST FOR QUOTE → Request a quote
SpecForge Editorial Team

NdFeB Magnet Price per Kilogram by Grade in 2026

Table of Contents
  1. Separate metal price from magnet price
  2. Grade bands and meaningful price differences
  3. Compare options against four procurement criteria
  4. What drives the delivered cost per kilogram
  5. Use cases and unsuitable applications
  6. Raw materials and total cost of ownership
  7. How to build a defensible 2026 quotation
NdFeB Magnet Price per Kilogram by Grade in 2026

NdFeB magnet pricing in 2026 cannot be reduced to one number: a published neodymium benchmark reached $174.06/kg on November 13, 2026, while finished magnets depend on grade, shape, coating and production volume [S1].

Commercial grade references span N30 to N52, with temperature suffixes extending the catalog range from standard N material at 80°C to TH material rated to 230°C [S5].

Separate metal price from magnet price

The published 2026 benchmark of $174.06/kg applies to neodymium priced at retail for private investors, not a finished NdFeB magnet delivered to an OEM [S1]. A magnet quote must identify whether the price covers metal, oxide, alloy, blank, machined component or fully coated assembly.

Neodymium oxide averaged $56/kg in 2024 and an estimated $73/kg in 2025, according to the USGS. These figures are upstream reference points, not finished-magnet prices. The distinction is essential because metal content, machining yield, coating, certification, packing and volume determine the delivered cost.

Grade bands and meaningful price differences

N-grade designations run from N30 through N52, with the number representing the maximum energy product in MGOe; N42 is identified as a high-performance option, while the cited supplier states that most of its products are N42 or above [S5].

These are historical blank quotations, not a 2026 finished-part price list, but they expose the price separation between ordinary N grades and higher-temperature material.

Grade selection should follow performance need rather than the highest available number. The number following N in a neodymium magnet grade represents its maximum energy product in MGOe, with higher values indicating a larger magnetic field in a particular application [S5].

Compare options against four procurement criteria

NdFeB magnet price per kg 2026 by grade - Compare options against four procurement criteria
NdFeB magnet price per kg 2026 by grade - Compare options against four procurement criteria

N42 standard-grade material, N42 M-grade material and N42 H-grade material differ across maximum operating temperature, raw-material loading, blank availability and final price: standard N is rated to 80°C, M to 100°C and H to 120°C [S5].

That comparison is not a universal 2026 quotation, but it gives engineers the correct selection logic: temperature rating, magnetic energy product, geometry and price should be evaluated together rather than treating N, M and H as interchangeable labels.

What drives the delivered cost per kilogram

Higher dyprosium loading supports higher-temperature grades but raises input exposure to a costly additive.

Coating adds another cost layer. Zinc, nickel, epoxy and other finishes require separate process steps, and a machined magnet can lose additional material during slicing, grinding and drilling. Geometric complexity matters because a small magnet may sell by the piece rather than the kilogram, with prices ranging from a few cents to thousands of dollars depending on size, grade and processing difficulty [S4].

Volume tier is another decisive lever because the $174.06/kg benchmark covers retail metal purchases, while bulk industrial and investment purchases require direct quotations [S1]. A single prototype, a production batch and a multi-tonne annual order therefore should not be evaluated against one unit price.

Use cases and unsuitable applications

NdFeB magnet price per kg 2026 by grade - Use cases and unsuitable applications
NdFeB magnet price per kg 2026 by grade - Use cases and unsuitable applications

Standard N material is suitable for general-purpose products, while M, H, SH, UH, EH and TH suffixes address operating environments rated at 100°C, 120°C, 150°C, 180°C, 200°C and 230°C respectively [S5]. The suffix ratings are guide values because magnet dimensions and shape also affect behavior at elevated temperature [S5].

NdFeB grades are appropriate for electric motors, generators, sensors, medical equipment, hardware and aerospace products where high magnetic performance is required [S5]. They are less suitable when the design must run above the selected suffix rating without thermal derating, or when the exposed environment makes corrosion protection and coating selection more important than the base grade.

Raw materials and total cost of ownership

Historical magnet-cost modeling divided NdFeB into standard, H, SH, UH, EH and AH formulations, with dyprosium rising from 0% in standard NdFeB to 6% in the AH formulation [S2]. The same dataset tracks aluminum, nickel, cobalt, copper, samarium, neodymium, iron, boron and dysprosium, confirming that finished-grade cost depends on a basket of materials rather than one metal.

Total cost must include installation, maintenance and energy, not only magnet purchase price. Installation adds machining, handling, fixturing and coating requirements; maintenance can involve inspection and replacement after corrosion or thermal exposure; energy depends on the motor or generator efficiency enabled by the magnetic design [S3]. A low-cost magnet that causes a larger housing, higher copper loss or premature replacement is not the lowest-cost solution.

How to build a defensible 2026 quotation

NdFeB magnet price per kg 2026 by grade - How to build a defensible 2026 quotation
NdFeB magnet price per kg 2026 by grade - How to build a defensible 2026 quotation

A comparable quote should specify at least four items: the numerical grade, temperature suffix, dimensional tolerances, coating or plating system, and annual or batch quantity. Grade families already run from N30 to N52, while the suffix alone can span 80°C to 230°C [S5].

Buyers should request separate pricing for blank material and machining, state whether prices include coating and packing, and record the quote currency and validity period. Historical blank bands of ¥108-190/kg for N30-N52 and ¥175-235/kg for 35H-50H squares provide a structure for comparison, not a substitute for a 2026 supplier quotation [S4].

The most trackable procurement signals are the neodymium benchmark, which was $174.06/kg on November 13, 2026, and supplier quotes for the exact grade, shape, coating and quantity [S1]. If the component is a high-temperature N or M grade, document the operating temperature and magnetic-energy requirement before accepting a price premium [S5].

Frequently asked questions

What is the 2026 benchmark price for neodymium metal, and does it apply to finished NdFeB magnets?

The published benchmark was $174.06/kg on November 13, 2026. It applies to neodymium metal sold at retail for private investors, not to finished magnets delivered to an OEM, which require grade- and product-specific quotations.

Which NdFeB temperature grade should be specified for an application operating at 100°C?

Specify N42 M-grade material for the cited 100°C operating-temperature class. Standard N42 is rated to 80°C, M-grade to 100°C, and H-grade to 120°C, although actual performance also depends on magnet dimensions and shape.

What information must a comparable 2026 NdFeB magnet quotation specify?

The quotation should state the numerical grade, temperature suffix, dimensional tolerances, coating or plating system, and annual or batch quantity. Buyers should also request separate prices for blank material and machining and confirm whether coating, packing, quote currency, and validity period are included.

5 sources
  1. Neodymium Price Today - Historical Chart & Forecast (6 days ago)
  2. Magnet Cost (per kg) Based Only on Main Raw Materials
  3. How Much Does Neodymium Cost? Oxide and NdPr Prices (Mar 13, 2026)
  4. Neodymium magnet price per kg (Oct 30, 2024)
  5. Neodymium Magnet Grades (Oct 22, 2024)

Need to source matching manufacturers or get a quote?

SpecForge connects industrial buyers with verified manufacturers. Submit your requirement and we will route it to matched suppliers.

Submit RFQ now →
Ask SpecForge AI