REQUEST FOR QUOTE → Request a quote
SpecForge Editorial Team

Recycle Iridium from Spent Catalysts and Crucibles

Table of Contents
  1. What Iridium Recovery Covers
  2. How the Recovery Route Works
  3. Comparing the Main Feed Material Types
  4. Catalysts, Crucibles, and Anodes Compared
  5. Which Feedstocks Suit Which Buyers
  6. Operational Limits and Recovery Risks
  7. Documentation That Drives Recovery Value
Recycle Iridium from Spent Catalysts and Crucibles

Iridium-bearing crucibles, spent catalysts, and coated anodes can be processed into refinable concentrate, with verified feeds refined to up to 99.9%+ purity subject to material composition and analytical results [S2].

The recovery stream covers catalysts, crystal-growth crucibles, mixed metal oxide anodes, powders, residues, and Pt-Ir solids, with value determined by iridium loading, contamination, form, and assay [S1][S2].

What Iridium Recovery Covers

Iridium has atomic number 77 and a density of 22.56 g/cm³, placing it among the six platinum group metals: platinum, palladium, rhodium, iridium, ruthenium, and osmium [S5].

Recoverable feedstocks include iridium-coated titanium anodes, damaged or used crystal-growth crucibles, Pt-Ir sheet, wire, rod and alloy scrap, spark-plug electrodes, PEM electrolyzer components, stripping residues, powders and production rejects [S1][S6].

Spent catalysts remain potential metal assets after contamination, sintering, or poisoning ends their useful service life. Assay establishes the precious-metal content, while pre-treatment may be required for heavily contaminated material before representative sampling [S3].

How the Recovery Route Works

Iridium withstands aggressive chemistry, and Viyanmani refines recovered iridium to up to 99.9%+ purity, subject to the supplied material conditions.

“The principle of representative sampling is that every particle in the prepared lot is equally likely to be included in the final sample” [S3]. That requirement is why gross weight alone is not an adequate basis for pricing or process design.

Comparing the Main Feed Material Types

iridium recycling from spent catalysts and crucibles - Comparing the Main Feed Material Types
iridium recycling from spent catalysts and crucibles - Comparing the Main Feed Material Types

Iridium recycling recovers the metal from mixed-metal-oxide coatings on titanium anodes and from solids that would otherwise be scrapped as titanium. Oryx Metals requests photographs and analysis and provides a written offer for iridium scrap.

Iridium crucibles are high-temperature solids used for single-crystal growth and other specialist applications. Broken or worn pieces should remain segregated by source so that composition and contamination can be assessed before sampling [S1][S2].

Spent catalysts require feed-specific preparation because petroleum refining, petrochemical, pharmaceutical, chemical, and fuel-cell catalysts contain different supports and metal combinations. Platinum, palladium, rhodium, ruthenium, silver, and in some reforming catalysts rhenium can coexist with iridium [S3][S7].

Oryx Metals buys iridium scrap in solid, powder, and residue forms, whether clean or contaminated, and considers its grade.

Catalysts, Crucibles, and Anodes Compared

Catalysts suit chemical, pharmaceutical, petroleum, and fuel-cell owners whose spent material contains several recoverable metals, while crucibles suit crystal-growth and high-temperature operations where the discarded item remains substantially iridium-bearing [S1][S3].

Coated anodes suit electrochlorination, plating, water treatment, and PEM electrolysis applications where the valuable layer is an iridium or ruthenium-containing mixed metal oxide on titanium [S1]. Ir-coated electrodes in PEM systems are examined in more detail under iridium recovery from spent PEM electrolyzer stacks.

Clean solids offer simpler sampling logic, while mixed catalysts and alloys require broader PGM separation capability [S1][S3].

Which Feedstocks Suit Which Buyers

iridium recycling from spent catalysts and crucibles - Which Feedstocks Suit Which Buyers
iridium recycling from spent catalysts and crucibles - Which Feedstocks Suit Which Buyers

Large generators with multiple iridium streams can supply separate, documented lots by feed type, including crucibles, catalysts, anodes and residues. Keeping these classes separate preserves assay traceability and reduces the risk of blending material with different iridium contents [S1][S3].

Catalyst owners should use a recycling route that can identify platinum, palladium, rhodium, ruthenium, silver and rhenium where present.

Small-volume crucible and anode owners should provide photographs, dimensions, material history, and available assay data. Oryx Metals asks for photographs and analysis when offering a written price for iridium scrap.

Buyers that need a certified refined product should specify the required purity and analytical method. Viyanmani refines iridium to up to 99.9%+ purity, subject to the supplied material conditions.

Operational Limits and Recovery Risks

Pyrometallurgical recovery can concentrate platinum group metals through alloying with collectors such as copper, iron, or lead, but it consumes substantial energy at high temperature. The review discusses hydrometallurgical iridium recovery, including leaching and separation.

Iridium's crustal abundance is extremely low, reported at 0.3–5 ng/g, and its market price is unstable because production is much smaller than for other platinum group metals [S5]. These constraints make feed characterization and recovery yield more important than the nominal gross weight of a shipment.

Damaged crucible fragments, mixed powders, contaminated anodes and catalyst residues cannot be treated as equivalent material. Their sampling requirements, support removal needs, metal deportment and contaminant profiles differ, and each requires a feed-specific process route [S1][S3].

Documentation That Drives Recovery Value

iridium recycling from spent catalysts and crucibles - Documentation That Drives Recovery Value
iridium recycling from spent catalysts and crucibles - Documentation That Drives Recovery Value

The four control stages are receiving, preparation, representative sampling, and refining. Chain-of-custody records, inspection, classification by type and origin, and lot segregation reduce the risk of material loss or incorrect blending [S3].

For coated anodes, useful records include the original coating specification, anode dimensions and photographs. For crucibles and catalysts, material origin, service history, prior assay certificates and contamination information help the recycler design sampling and pre-treatment [S1][S3].

McCol Metals reported recycling 12,000 troy ounces of iridium oxide from spent MMO titanium anodes over the four years following commercialization in 2023 [S4]. That figure demonstrates meaningful MMO-anode recovery activity, but it does not replace lot-specific assay because coating loading and material form still govern valuation [S1][S4].

A plant with exposed iridium-bearing crucibles or an anode refurbishment line can begin by segregating each stream, recording gross weight and source, photographing representative pieces, and requesting an assay-based recycling offer before shipment.

Frequently asked questions

What purity can refined iridium concentrate or powder reach from spent catalysts and crucibles?

Verified iridium-bearing feeds can be refined to as high as 99.9%+ purity, subject to material composition and the applicable analytical results. Viyanmani uses ICP-OES verification for reduced iridium powder.

Which information should be supplied when evaluating used iridium-coated titanium anodes?

Provide dimensions, photographs, and the original coating specification because anode economics depend on coating loading and anode area. Coated anodes also require coating removal or whole-anode processing, with titanium recovered separately.

How should broken iridium crucibles and spent catalysts be segregated before recycling?

Segregate broken or worn crucibles by source and separate catalysts, anodes, powders, and residues into documented lots by feed type. This preserves assay traceability and reduces the risk of blending materials with different iridium contents.

What preparation is required before sampling heavily contaminated spent catalysts?

Heavily contaminated catalysts may require pre-treatment before representative sampling. The prepared lot must be sampled so that every particle has an equal chance of inclusion, because gross weight alone cannot establish iridium content or pricing.

7 sources
  1. Iridium Recycling & Iridium Scrap
  2. Iridium (Ir) Recovery & Refining - Metals - Viyanmani
  3. Spent Catalyst Recycling: How Precious Metals Are ...
  4. Recycling iridium for a greener future (Aug 14, 2023)
  5. A Short Review on Hydrometallurgical Recovery of Iridium
  6. Iridium Recovery & Recycling - VMET
  7. Recycling of Palladium from Spent Catalysts Using Solvent ...

Need to source matching manufacturers or get a quote?

SpecForge connects industrial buyers with verified manufacturers. Submit your requirement and we will route it to matched suppliers.

Submit RFQ now →
Ask SpecForge AI