Manufacturer profile

Fuji Electric Co., Ltd.

Fuji Electric Co., Ltd. is a manufacturer based in Tokyo, Japan. [S2][S1]

Country
Japan [S1]
City
Tokyo [S2]
Fuji Electric SM1200 low voltage motor control center
Official product image [S28]

Evidence scope

The retained official product route documents: Fuji Electric Co., Ltd. manufactures SM1200 control centers and low-voltage motor control centers from Tokyo, Japan. This dossier uses that cited route as the editorial scope. [S9]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S14]

Mcc Cabinet

Documented series: Fuji Electric SM1200 low voltage motor control center

Fuji Electric Co., Ltd. manufactures SM1200 control centers and low-voltage motor control centers from Tokyo, Japan. [S9]

Documented specifications for Mcc Cabinet
StandardIEC62271-200 [S10]
  • Fuji Electric SM1200 low voltage motor control center [S4]

Selection fit: SM1200 is a low-voltage motor control center / control center cabinet for high-density unit mounting and safe industrial motor control distribution. [S4]

Medium Voltage Vfd

Documented series: Fuji Electric FRENIC4600FM6e medium-voltage inverter

Fuji Electric documents FRENIC4600FM6e as a cabinet family for direct variable-speed control of medium-voltage motors. [S5]

Operating characteristics
The page states high-efficiency and high-power-factor operation. [S11]
Lifecycle boundary
FM6e is presented as the current cabinet family; discontinued adjacent variants are not imported. [S12]
  • Fuji Electric FRENIC4600FM6e medium-voltage inverter [S5]

Selection fit: Voltage, capacity, transformer, cabinet count, motor compatibility and lifecycle remain configuration-specific. [S13]

Servo Drive

Documented series: Fuji Electric ALPHA7 servo system

Fuji Electric documents ALPHA7 as a finished industrial servo-system family. [S6]

Power and encoder
The page lists servo-amplifier pairings across 0.05–5.0 kW and 24-bit encoder options. [S15]
Control configurations
Amplifier variants cover position, speed, torque and full-closed control configurations. [S16]
  • Fuji Electric ALPHA7 servo system [S6]

Selection fit: Response, encoder type, full-closed support, mode, voltage, output and motor combination vary by amplifier and motor series. [S17]

Servo Motor

Documented series: Fuji Electric ALPHA7 servomotors

Fuji Electric documents ALPHA7 as a servo-system family with finished servomotor ranges. [S7]

Documented specifications for Servo Motor
Ingress protectionIP 67 [S23]
Output and speed
The GYS ultra-low-inertia motor range spans 0.05–5 kW with a 3,000 r/min rated-speed class. [S19]
Protection and encoders
ALPHA7 motor tables list IP67 construction and 24-bit absolute, batteryless-absolute or incremental encoder variants. [S20]
  • Fuji Electric ALPHA7 servomotors [S7]

Selection fit: The hero contains both motor and amplifier and supports only family imagery; output, speed, inertia, IP exclusions, encoder, brake and amplifier pairing vary by model. [S21]

Vfd

Documented series: Fuji Electric FRENIC-Mini C2 drives

Fuji Electric documents FRENIC-Mini C2 as a compact VFD family. [S8]

Supply and output
The cited route lists a 200–240 V input configuration with 5.5 A three-phase output. [S24]
Overload ratings
The retained page specifies 150% overload for one minute and 200% for 0.5 seconds for the cited model route. [S25]
  • Fuji Electric FRENIC-Mini C2 drives [S8]

Selection fit: Supply, output, overload and motor rating remain exact-model facts. [S26]

Product range and documented series

Fuji Electric Co., Ltd. manufactures SM1200 control centers and low-voltage motor control centers from Tokyo, Japan. [S9]

  • Fuji Electric SM1200 low voltage motor control center [S4]Source note: ontrol Center (Type:SM1200) The Fuji SM1200 Control Center is an easy-to-use and highly safe control center built up
  • Fuji Electric FRENIC4600FM6e medium-voltage inverter [S5]Source note: Fuji Electric FRENIC4600FM6e medium-voltage inverter
  • Fuji Electric ALPHA7 servo system [S6]Source note: Fuji Electric ALPHA7 servo system
  • Fuji Electric ALPHA7 servomotors [S7]Source note: Fuji Electric ALPHA7 servomotors
  • Fuji Electric FRENIC-Mini C2 drives [S8]Source note: Fuji Electric FRENIC-Mini C2 drives

Procurement fit

The SM1200 is positioned as a low-voltage motor control center for high-density unit mounting and industrial motor control distribution, built to IEC62271-200. The FRENIC4600FM6e medium-voltage inverter requires configuration-specific selection on voltage, capacity, transformer, cabinet count, motor compatibility, and lifecycle. ALPHA7 servo components require pairing decisions across amplifier and motor series for response, encoder type, full-closed support, mode, voltage, and output. FRENIC-Mini C2 procurement depends on exact-model supply, output, overload, and motor rating.

Technical capabilities

The SM1200 conforms to IEC62271-200. The FRENIC4600FM6e is documented for high-efficiency and high-power-factor operation. The ALPHA7 servo system covers 0.05 to 0.75kW at IP67, with amplifier pairings to 0.05 to 5.0 kW, 24-bit encoders, and position, speed, torque, and full-closed control. ALPHA7 servomotors share 0.05 to 0.75kW and IP67; the GYS ultra-low-inertia range spans 0.05 to 5 kW at 3,000 r/min with 24-bit absolute, batteryless-absolute, or incremental encoders. FRENIC-Mini C2 cited route: 200 to 240 V input, 5.5 A three-phase output, 150% overload for one minute, 200% for 0.5 seconds.

Markets and applications

Documented applications include industrial motor control distribution via the SM1200 MCC, high-power-factor medium-voltage inverter use through the FRENIC4600FM6e, precision servo positioning and speed or torque control across the ALPHA7 range, and three-phase motor speed control via the FRENIC-Mini C2. Specific industry verticals, end-user references, and installed-base figures are not publicly documented within the cited material.

Evidence limitations

Company history, founding date, financial scale, employee count, and global ranking are not publicly documented. Customer references, project case studies, and installed-base figures are not publicly documented. Certification listings beyond IEC62271-200 on the SM1200 are not publicly documented. Regional service coverage, lead times, warranty terms, and authorized distributor networks are not publicly documented. Detailed efficiency curves, harmonic data, and EMC compliance figures for the FRENIC4600FM6e and FRENIC-Mini C2 are not publicly documented.

Editorial summary

Fuji Electric Co., Ltd., based in Tokyo, Japan, supplies industrial drive and motor-control products across five documented categories: MCC cabinet, medium voltage VFD, servo drive, servo motor, and VFD. Documented offerings include the SM1200 low-voltage motor control center, the FRENIC4600FM6e medium-voltage inverter, the ALPHA7 servo system with its ALPHA7 servomotors, and the FRENIC-Mini C2 drive family. Each series is presented within the cited material as the current family for its respective product category.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Identity and location are retained from the cited official source. Product facts and visual are limited to Fuji Electric FRENIC4600FM6e medium-voltage inverter; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S14]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to Fuji Electric ALPHA7 servo system; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S18]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to Fuji Electric ALPHA7 servomotors; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S22]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to Fuji Electric FRENIC-Mini C2 drives; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S27]Company-stated

Frequently asked questions

What Motor Control Center product is documented for Fuji Electric Co., Ltd.?

The retained product material names Fuji Electric SM1200 low voltage motor control center. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S14]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.