Manufacturer profile

Schneider Electric USA, Inc.

Schneider Electric USA, Inc. is a manufacturer based in Franklin, United States. [S2][S1]

Country
United States [S1]
City
Franklin [S2]
Schneider Harmony RXM2AB2BD electromechanical plug-in relay
Official product image [S27]

Evidence scope

The retained official product route documents: Schneider Electric USA distributes Harmony electromechanical industrial control products. This dossier uses that cited route as the editorial scope. [S9]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S14]

Industrial Relay

Documented series: Schneider Harmony RXM2AB2BD miniature plug-in electromechanical relay

Schneider Electric USA distributes Harmony electromechanical industrial control products. [S9]

Documented specifications for Industrial Relay
Current rating6A [S10]
  • Schneider Harmony RXM2AB2BD miniature plug-in electromechanical relay [S4]

Selection fit: Miniature plug-in electromechanical relays for industrial control circuits. [S4]

Selector Switch

Documented series: Schneider Electric Harmony XB4BD33 selector

Schneider Electric USA documents Harmony XB4BD33 as a finished 22 mm selector switch. [S5]

Positions and contacts
XB4BD33 has three maintained positions and two NO contacts. [S11]
Format and rating
The black 22 mm selector article specifies a 600 V rating and a metal Harmony XB4 operator system. [S12]
  • Schneider Electric Harmony XB4BD33 selector [S5]

Selection fit: Confirm the exact XB4BD33 operator, contacts, maintained action, voltage and panel system. [S13]

Signal Tower Light

Documented series: Schneider Electric Harmony XVC4B3 tower light

Schneider Electric USA documents XVC4B3 as a monolithic preassembled and precabled tower light. [S6]

Signal and electrical format
The 40 mm unit has steady red, orange and green LED stages for 24 V AC/DC. [S15]
Mounting and protection
The retained article uses tube mounting, provides 360-degree visibility and lists IP23 for the cited configuration. [S16]
  • Schneider Electric Harmony XVC4B3 tower light [S6]

Selection fit: Confirm the exact XVC4B3 mounting orientation, enclosure exposure, wiring and voltage for the installation. [S17]

Soft Starter

Documented series: Schneider Electric Altivar ATS480C17Y soft starter

Schneider Electric USA documents ATS480C17Y as a finished Altivar soft starter. [S7]

Current and motor supply
ATS480C17Y is rated 170 A normal duty and 140 A heavy duty for 208–690 V three-phase asynchronous motors. [S19]
Motor control
The exact page lists torque control, dynamic braking and DC injection. [S20]
  • Schneider Electric Altivar ATS480C17Y soft starter [S7]

Selection fit: Power, current, mounting, application duty, certifications, communication and braking behavior are model-specific. [S21]

Time Relay

Documented series: Schneider Electric Harmony RE17RAMU timer relay

Schneider Electric USA documents RE17RAMU as a finished dual-function timer relay. [S8]

Format and timing
The 17.5 mm DIN-rail on-delay timer adjusts from 1 second to 100 hours. [S23]
Supply and output
It provides one 8 A changeover contact and accepts 24 V DC or 24–240 V AC/DC. [S24]
  • Schneider Electric Harmony RE17RAMU timer relay [S8]

Selection fit: Retain the official marketplace article and keep facts exact to RE17RAMU. [S25]

Product range and documented series

Schneider Electric USA distributes Harmony electromechanical industrial control products. [S9]

  • Schneider Harmony RXM2AB2BD miniature plug-in electromechanical relay [S4]Source note: miniature plug in relay, Harmony Electromechanical Relays, 12A, 2CO, with LED, lockable test but to n, 24V DC | Schneider Electric Marketplace USA-EN --> Skip to main content Schne
  • Schneider Electric Harmony XB4BD33 selector [S5]Source note: Schneider Electric Harmony XB4BD33 selector
  • Schneider Electric Harmony XVC4B3 tower light [S6]Source note: Schneider Electric Harmony XVC4B3 tower light
  • Schneider Electric Altivar ATS480C17Y soft starter [S7]Source note: Schneider Electric Altivar ATS480C17Y soft starter
  • Schneider Electric Harmony RE17RAMU timer relay [S8]Source note: Schneider Electric Harmony RE17RAMU timer relay

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Identity and location are retained from the cited official source. Product facts and visual are limited to Schneider Electric Harmony XB4BD33 selector; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S14]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to Schneider Electric Harmony XVC4B3 tower light; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S18]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to Schneider Electric Altivar ATS480C17Y soft starter; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S22]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to Schneider Electric Harmony RE17RAMU timer relay; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S26]Company-stated

Frequently asked questions

What Industrial Relay product is documented for Schneider Electric USA, Inc.?

The retained product material names Schneider Harmony RXM2AB2BD miniature plug-in electromechanical relay. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S14]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.