REQUEST FOR QUOTE → Request a quote
SpecForge Editorial Team

Continuous Inkjet vs Thermal Inkjet for Date Coding

Table of Contents
  1. Decision Criteria for Date-Coding Technology
  2. TIJ and CIJ Compared by Operating Requirements
  3. Substrate Selection and Ink Adhesion
  4. Speed, Print Quality and Code Distance
  5. Consumable Cost and Maintenance Burden
  6. Application Fit and Failure Modes
  7. Integration, Coding Sequence and Compliance
  8. Final Specification Checklist
Continuous Inkjet vs Thermal Inkjet for Date Coding

Continuous inkjet printers operate at speeds up to 600 m/min, making CIJ the stronger fit for high-volume production lines [S2].

Thermal inkjet reaches up to 1,200 dpi and up to 2,400 ft/min at lower resolutions, while CIJ provides broader substrate compatibility and lower cost per print at volume [S3].

Decision Criteria for Date-Coding Technology

Select TIJ when the code must be sharp, the substrate is porous or absorbent, and the operating team should avoid managing a recirculating fluid system. TIJ uses heat to create droplets on demand, works particularly well on cardboard, paper and absorbent packaging, needs no make-up fluid, and is typically compact and easy to integrate [S5].

Select CIJ when throughput, distance from the product, substrate range and consumable cost dominate. CIJ generates a continuous stream of charged droplets and deflects them to form characters. It suits non-porous surfaces, large print throw distances and continuously running lines processing plastic, glass or metal containers [S5].

This comparison has a practical boundary: neither technology is inherently superior. Four inputs decide the selection: substrate, code content, production volume and available maintenance capacity [S3].

TIJ and CIJ Compared by Operating Requirements

Thermal inkjet is the better fit for clean, high-resolution coding on cartons, labels and cases, particularly where barcodes, 2D codes, graphics and small text must remain legible. Its cited resolution is up to 1,200 dpi, and its speed can reach 2,400 ft/min at lower resolutions [S3].

Continuous inkjet is the better fit for high-speed production across mixed substrates. The cited speed is up to 600 m/min, compared with contact-based date coders [S2]. CIJ can handle plastic, glass, metal and paper, while TIJ compatibility depends on the ink and substrate [S3].

For date-code content alone, both methods can apply fixed and variable data during ongoing production [S8]. CIJ is the stronger choice for a single date, lot number or serial number on a fast, continuous line. TIJ becomes preferable when the same application also requires fine characters, readable barcodes or graphical marks.

Substrate Selection and Ink Adhesion

continuous inkjet coder vs thermal inkjet coder for date coding - Substrate Selection and Ink Adhesion
continuous inkjet coder vs thermal inkjet coder for date coding - Substrate Selection and Ink Adhesion

TIJ is most naturally aligned with porous substrates such as corrugated board, paper labels, some flexible film and secondary packaging [S5]. The ClearMark application demonstrates direct date and lot coding onto metal cans, showing that TIJ can extend beyond paper when the ink and substrate combination is validated [S1].

CIJ has the broader material envelope. It is used on plastic, glass, metal, paper and curved products, while TIJ compatibility depends more heavily on the selected cartridge or bulk ink and the absorption characteristics of the package [S3][S5].

Do not select by product category alone. Run representative samples using the production ink, actual overwrap or coating, and the real code geometry. A substrate that accepts one ink can reject another because of surface energy, coating, contamination or cure requirements, so substrate-specific validation is essential [S3].

Speed, Print Quality and Code Distance

CIJ leads when production runs continuously at high speed: the cited upper figure is 600 m/min, and CIJ is described as the standard choice for high-volume lines [S2]. TIJ can also run extremely fast, with up to 2,400 ft/min at lower resolutions, so a low-speed-only comparison would be misleading [S3].

TIJ leads when resolution controls readability. Its cited capability of up to 1,200 dpi supports small text, barcodes and 2D codes on cartons and labels [S3]. CIJ remains practical for ordinary production codes at high speed, but the comparison data do not place it in the same resolution-led category.

Throw distance also separates the technologies. CIJ can place codes at a comparatively long distance from the print head, which helps packaging layouts where the product cannot pass close to the coder [S5]. TIJ normally suits closer print-head placement and is often considered alongside a coding machine when integration geometry is fixed.

Consumable Cost and Maintenance Burden

continuous inkjet coder vs thermal inkjet coder for date coding - Consumable Cost and Maintenance Burden
continuous inkjet coder vs thermal inkjet coder for date coding - Consumable Cost and Maintenance Burden

That planning figure separates sharply at high print volume.

TIJ reduces the daily service burden because it operates from cartridges or bulk ink, offers aqueous and solvent options, and does not require make-up fluid [S3][S5].

CIJ requires a more complex fluid system. It consumes ink and make-up solvent and carries additional maintenance requirements, although automated maintenance systems on newer platforms reduce operator involvement [S3]. The practical calculation is total cost per readable code, not cartridge price or ink price alone.

Application Fit and Failure Modes

Use TIJ for secondary packaging, corrugated cases, paper labels and selected flexible films where clean integration and high-resolution variable data matter [S5]. It is also a candidate for food packaging, subject to ink validation for each material [S5].

Use CIJ for beverage cans and bottles, fast-moving consumer goods, pharmaceutical products, plastic, glass and metal containers [S5]. CIJ is a candidate for lines that require a long print-head standoff or handle changing substrates, depending on the production conditions [S3].

The main TIJ failure mode is treating porous and non-porous packages as equivalent. Ink absorption can soften a high-resolution code, while an unsuitable formulation can bead or fail to wet a non-porous surface. The main CIJ failure mode is ignoring fluid-system maintenance, solvent handling and makeup consumption. Both methods can produce unreadable codes when print distance, waveform, ink, substrate or synchronization is not qualified.

Integration, Coding Sequence and Compliance

continuous inkjet coder vs thermal inkjet coder for date coding - Integration, Coding Sequence and Compliance
continuous inkjet coder vs thermal inkjet coder for date coding - Integration, Coding Sequence and Compliance

A reliable installation links the coder to product-position sensing, code verification, reject handling and the line control system. For cartons, the physical sequence may place coding within the carton erecting machine or case packing machine, depending on whether the code belongs on an erected blank or a finished case. [S5]

Both CIJ and TIJ can mark dates, lot numbers, batch numbers, serial numbers, barcodes and logos [S7]. CIJ applies fixed and variable information during ongoing production [S8]. The required code should be specified in terms of human-readable date format, character height, barcode or 2D symbology, placement tolerance and verification rule rather than by printer technology alone.

Date-coder selection is not a standalone marking decision. Ink specification, substrate compatibility, production speed, environmental exposure, maintenance access and code-verification requirements must be qualified together. Substrate-specific testing is covered in Coding Machine Ink Compatibility by Substrate.

Final Specification Checklist

Specify CIJ when the line exceeds the available TIJ duty cycle, handles changing or non-porous substrates, requires a long standoff, or generates enough prints to make the three-to-five-times TIJ cost multiple decisive [S3]. Record the required line speed, coding window, substrate, code dimensions and acceptance test before ordering.

Specify TIJ when resolution, barcode readability, compact integration and minimal maintenance outweigh unit-cost sensitivity. Validate the selected ink on production packaging, record the print-resolution setting, and confirm operation at the specified line speed, which can reach 2,400 ft/min at lower resolutions [S3].

The next decision should be a production trial: measure readable-code yield across at least 3 line-speed conditions, log ink and make-up consumption per 1,000 codes, record intervention time, and verify that inspection can reject defective codes. Those five outputs provide a defensible comparison for either technology.

Frequently asked questions

Which date coder is best for high-speed lines printing on mixed plastic, glass, and metal containers?

Continuous inkjet is a candidate for high-speed, mixed-substrate coding [S3]. It also supports a comparatively long print-head standoff and solvent-based inks that generally provide better adhesion across plastic, glass, metal, and paper.

What resolution and speed can thermal inkjet achieve for legible barcodes and small text?

Thermal inkjet reaches up to 1,200 dpi and supports small text, barcodes, and 2D codes on cartons and labels. It can run at up to 2,400 ft/min when operating at lower resolutions.

How much more expensive is thermal inkjet per print than continuous inkjet?

The difference varies with code complexity, resolution, and whether make-up fluid and service labour are included.

When is thermal inkjet preferable to continuous inkjet for date coding?

Thermal inkjet is preferable when sharp codes, readable barcodes, 2D codes, or small text are required on porous or absorbent materials such as cardboard and paper labels. It also avoids the recirculating fluid and make-up solvent required by continuous inkjet, reducing routine maintenance.

9 sources
  1. ClearMark™ Thermal Inkjet Coder | Date and Lot Code…
  2. Comparing Today's Leading Date Coding Technologies
  3. Thermal Inkjet vs Continuous Inkjet: TIJ vs CIJ
  4. Date Coding Machines & Printers | Date Coders
  5. Lot and Date Code Printers
  6. Thermal Inkjet Printers, TIJ Printers
  7. Industrial Printers & Coders
  8. Date Coder I Inkjet Coding with LEIBINGER
  9. Date Code Printers | Inkjet Date Coding Machines - PrintSafe

Need to source matching manufacturers or get a quote?

SpecForge connects industrial buyers with verified manufacturers. Submit your requirement and we will route it to matched suppliers.

Submit RFQ now →
Ask SpecForge AI