Marine globe valves provide throttling and isolation with pressure ratings from PN 50 to PN 248, sizes from DN 6 to DN 100, and operating temperatures from -20°C to 350°C for one published marine model family [S8].
The selection must cover the actual fluid, design pressure, operating temperature, required flow coefficient, corrosion exposure, connection type, actuation method, and applicable shipboard approval, not merely the nominal bore.
Where Marine Globe Valves Provide Value
A globe valve uses a movable disk that travels toward a stationary seat to start, stop, and regulate flow, and its changing flow area makes it suitable for throttle control.
Marine globe valves are used for flow control in ships and offshore platforms. The compact form also suits machinery spaces where access is restricted [S4].
Globe valves excel at modulating flow through throttling.
Pressure, Temperature, and Flow Capacity
The valve body, closure member, seat, stem, and end connections must be rated for the maximum working pressure at the corresponding temperature.
IMI Truflo Marine lists a pressure range of PN 50–248, DN 6–100 sizes, and a temperature range of -20°C to 350°C.
For sizing, establish the line size, fluid density, operating flow rate, upstream and downstream pressures, and permissible pressure drop. Then select the valve whose published flow coefficient meets the calculated duty at the installed orientation and internal opening.
Materials for Seawater, Fuel, and Steam

Material selection must account for the valve's marine environment and corrosion-resistance requirements. Marine product families are offered in bronze, stainless steel, steel, ductile iron, Monel, and aluminum.
Bronze and stainless steel are identified as practical corrosion-resistant selections for marine environments. Materials must be selected with attention to strength and corrosion resistance.
Marine valves must withstand exposure to corrosive saltwater. The valve material should therefore be checked against the adjoining pipe, flange, bolting, and seawater exposure, with isolation of incompatible metals where required.
Marine-Specific Failure Modes and Exclusions
Globe valves should not be selected as the default for every shipboard isolation point.
Marine valves must withstand extreme vibration and harsh marine environments.
Connections, Operation, and Maintenance

Connection selection must match the vessel's pipe material and installation practice. IMI Truflo Marine offers marine globe valves in DN 6–100 sizes.
Manual operation is appropriate for infrequent adjustment and basic isolation. Motor operation adds controlled actuation for remote or automated systems, while a control actuator requires a specified air supply, signal protocol, travel time, fail position, and position feedback. Selection data must include the valve's pressure rating and flow coefficient at the intended opening, because actuator sizing should use the maximum required differential pressure rather than the closed-valve differential [S2].
Maintenance access is a design constraint because deep bilges and crowded pipe tunnels must be serviced with onboard resources. Favor a design that permits seat, packing, gland, or stem inspection and replacement without removing the complete valve from the line where space allows [S2][S5].
Approval, Documentation, and Purchasing Shortlist
The procurement file should identify the valve model, DN size, PN or ASME class, allowable temperature, body and trim materials, end connection, flow coefficient, seat leakage criterion, actuation, mounting orientation, medium, and required classification or naval approval. Marine valve guides identify DNV and BV among the classification societies considered during ship selection, while supplier catalogs also identify NAVSEA and military specifications, including specification 803-4384536 for UE globe valves [S3][S5].
Do not infer approval from the words marine or seawater. Require the exact model and size to appear in the approval document or manufacturer's certification package, and reconcile every line in the purchase specification against that package. The candidate models cited in this guide include IMI Truflo Marine at DN 6–100 and PN 50–248 [S8].
Shortlist a globe valve only when the duty requires controlled throttling, repeated operation, or secure isolation with a manageable pressure drop. For a full-bore low-loss isolation valve, compare the result with the criteria in Marine Ball Valve Selection: Body, Bore, Class, and Compliance. For large-bore ship service, also review Select Marine Butterfly Valves by Service and Class.
Before ordering, freeze the 10 design points: fluid, duty flow, inlet and outlet pressure, design temperature, corrosion class, DN, connection, actuation, acceptance standard, and required class approval. Verify all 10 against the manufacturer's certified data sheet and class certificate, then obtain a written discrepancy response for any blank or conditional field.