New roller-conveyor and drum-type [shot blasting machine](https://shot-blastingmachine.sell.everychina.com/) lines from Chinese OEMs sit in a US$9,500-US$50,000 ex-works band on 1-set MOQ listings dated June 2026 [S3][S5], while Indian-built Diabola units for small and medium iron castings are positioned below that band as a cost-effective cleaning option [S2].
Listed prices exclude delivery, customs duty, installation, abrasive media and the dust collector; the manufacturer's own catalogue page warns that figures are pre-tax, indicative, and vary by country with raw-material and FX swings [S1], so the cleanest baseline for budget work is the FOB unit price, with 30-80% loading for the typical site package.
Listed price bands by machine family (June 2026)
Made-in-China factory listings for the SA2.5-3.0 steel-pipe/round-bar roller-conveyor cleaning machine and the H-beam/steel-plate roller-conveyor automatic unit both publish a US$15,000-US$50,000 price range on 1-set MOQ [S5]. The wheel-blast roller-conveyor anti-corrosion line, also from the same Chinese factory page, drops to US$9,500-US$11,000 per piece on 1-piece MOQ — the lower end reflects the smaller work envelope and lower installed wheel-horsepower [S5].
Indian Diabola-style airless shot blast equipment is listed as a product category by the manufacturer on its product page [S2]. Qingdao Puhua's roller-conveyor and drum family is also positioned for sale through the EveryChina industrial channel in June 2026, with active-member status indicating ongoing RFQ traffic [S3].
Spec-to-cost levers: type, abrasive and cleanliness target
The dominant cost driver is machine family rather than brand: Q32 crawler (履带式), Q37 hook (吊钩式), Q35 turntable (转台式) and Q69 roller-conveyor (辊道式) classes cover progressively larger and heavier workpieces, and the same Chinese reference lists them as the four canonical configurations used in foundry cleaning rooms [S6]. Larger work envelope means heavier shot-charge, larger abrasive-recovery augers, and a bigger dust collector — three line items that scale super-linearly with workpiece weight.
Cleanliness target pulls the next lever. The factory catalogue markets SA2.5-SA3.0 (ISO 8501-1) finishes on its roller-conveyor cleaning machine [S5]. Abrasive choice — steel cut-wire, steel grit, cast shot, or aluminium oxide — then drives media consumption, which on a single-shift foundry line can run 0.5-2.0 kg per tonne of workpiece.
Configuration items that move the ex-works number
Three bolt-on subsystems typically push a "machine" price to a "line" price: (1) the dust collector, sized in m³/h to the wheel-blaster's air volume, with cartridge or bag-house filtration; (2) the abrasive recovery and classification system, including elevator, separator and shot-cleaner; (3) the loading/unloading conveyor or manipulator, since a turntable or hook track is the cheapest infeed and a roller conveyor is the most expensive. The QGT15 drum-type and Q3512/Q3525 turntable ranges published by Kaitai Machinery in June 2026 are example mid-tier packages combining these subsystems [S4].
Control architecture is a fourth, often-underestimated lever. A basic PLC + HMI is bundled; adding recipe management, shot-flow trending, and a Profinet/EtherNet/IP gateway to a plant MES will typically add a low-single-digit percentage to the line price but pays back in abrasive consistency and energy use. Cyclone vs cartridge dust collection is another 5-15% delta on the collector alone, with cartridge favoured where emission limits are tight and floor space is constrained.
Comparison: typical 2026 configurations against four cost/spec criteria
For a procurement engineer, the four decisive criteria are work-envelope, cleanliness target, abrasive handling, and price band. The crawler (Q32) suits 5-50 kg batches at SA2.5, runs the cheapest abrasive loop, and lists in the lowest Indian/Chinese band; the turntable (Q35) adds a rotating table for short cycles on 100-500 kg parts at SA2.5-SA3.0 and is the workhorse for small foundries; the roller-conveyor (Q69) handles plate, H-beam and pipe continuously at SA2.5-SA3.0, which is exactly the band the Chinese OEM publishes for its US$15,000-US$50,000 line [S5]; the hook (Q37) takes the irregular heavy castings that the roller conveyor cannot index cleanly [S6]. The Diabola is a separate Indian small-iron niche, optimised for cost over versatility [S2].
For a related decision framework that maps each machine type to its abrasive, spec and total-cost gate, the broader Shot Blasting Machine 2026 Buying Guide walks the same four families against the same criteria. Cross-equipment cost logic — frame size, MOQ, and supplier tier — applies just as cleanly to a stepper motor 2026 price & cost guide, where the dominant cost lever is mechanical envelope plus feedback option rather than abrasive loop.
Total landed cost: ex-works is not the budget
The Eurotherm GR-series shot-blasting booth listing is explicit that the published figure excludes delivery, customs duty, installation and commissioning, and that prices are indicative and move with raw-material and FX rates [S1]. Apply that to the Chinese factory numbers and a 20-foot-container drum or turntable unit shipped CIF to a Gulf or European port will typically land at 1.18-1.35x ex-works; sea-freight differential for an oversize roller-conveyor can push the multiple to 1.3-1.5x.
Installation, ducting, electrical hook-up, foundation grouting, and site acceptance test (SAT) at the buyer's plant typically add another 10-25% on top of the landed figure, with the higher end applying to roller-conveyor lines that need a civil foundation. None of those multipliers appear on the catalogue page, and ignoring them is the most common reason a "US$18,000" machine becomes a US$35,000 project.
Sourcing routes and supplier-tier effect on price
Three sourcing tiers are visible in the June 2026 listings: tier 1, branded European booths (Eurotherm, Wheelabrator-class) on the DirectIndustry catalogue with indicative, non-published pricing [S1]; tier 2, established Chinese OEM lines (Qingdao Puhua, Kaitai) selling both direct and through industrial B2B portals with active-member RFQ traffic [S3][S4]; tier 3, OEM/ODM Chinese factories on Made-in-China with explicit MOQ and FOB price ranges and OEM/ODM customisation flagged [S5]. Indian manufacturers such as the Diabola builder occupy a parallel tier-2/3 path focused on small-medium iron castings [S2].
The supplier-tier effect on price is structural, not cosmetic. A tier-1 European booth at indicative-only pricing typically lands 2.5-4x the tier-3 Chinese ex-works figure for comparable work envelope, with the premium buying local service, CE/ATEX documentation depth, and shorter spares lead times. A tier-3 OEM/ODM route can drop the unit price by 50-70% against tier 1, but shifts documentation, FAT, and warranty burden to the buyer; the right answer depends on how much the buyer's plant team can absorb. A useful analogue is the AC motor 2026 price & cost guide, where supplier tier and MOQ move the headline price by a similar factor band before any spec premium is added.
Limits, constraints and common failure modes in the budget
Three failure modes consistently blow the cost gate on shot-blasting lines. First, under-sized dust collector — the wheel blaster's air volume demands a collector matched in m³/h and static pressure, otherwise shot carry-out destroys the cartridge and the surrounding cell; retrofit is more expensive than right-sizing at RFQ. Second, abrasive contamination — without a working air-wash separator and shot cleaner, fines migrate into the wheel and erode the blades; blade-set replacement on a 7.5-15 kW wheel is the single biggest maintenance line item and should be budgeted at 1,000-3,000 operating hours. Third, electrical integration — Chinese PLC panels are usually fine for standalone operation but may not match the plant's existing DCS/MES protocol, and protocol-converter hardware is a frequent unbudgeted add. [S1]
For buyers weighing the foundry-side decision against a different finishing process, the same total-cost discipline applies to a vacuum packaging machine 2026 buying guide or a 2026 truck-mounted concrete pump price and cost guide, where the ex-works price is similarly only the starting point of a landed, installed, commissioned total. Treat the ex-works number as the input, not the budget.
Trackable signals through Q3 2026: any revision to Made-in-China OEM list prices for the QGT drum and Q35 turntable families [S4][S5], and any update to Eurotherm's indicative pricing on the GR booth line [S1]; both will move first, with freight indices following.
For component-level specifications, see shot blasting machine, sand blasting machine, and linear guide.