Manufacturer profile

WAGO Corporation

WAGO Corporation is a manufacturer based in Germantown, United States. [S2][S1]

Country
United States [S1]
City
Germantown [S2]
Website
wago.com

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Connection and supply
The meter supports direct connection to 65 A at 3 × 230/400 V and 50 Hz. [S4]
Interfaces and mounting
It provides Modbus, M-Bus, two S0 outputs and a four-module DIN footprint. [S5]
WAGO 879-3000 Energy Meter MID24
Official product image [S6]

Evidence scope

The retained official product route documents: WAGO documents 879-3000 as an exact MID24 energy meter. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S14]

Electricity Meter

Documented series: WAGO 879-3000 Energy Meter MID24

WAGO documents 879-3000 as an exact MID24 energy meter. [S6]

Connection and supply
The meter supports direct connection to 65 A at 3 × 230/400 V and 50 Hz. [S4]
Interfaces and mounting
It provides Modbus, M-Bus, two S0 outputs and a four-module DIN footprint. [S5]
  • WAGO 879-3000 Energy Meter MID24 [S6]

Selection fit: This packet is scoped to the exact catalog number; no Germantown factory claim is made. [S13]

Fieldbus Gateway

Documented series: WAGO 750-375 Fieldbus Coupler PROFINET IO.

WAGO Corporation documents an industrial fieldbus gateway offering. [S15]

  • WAGO 750-375 Fieldbus Coupler PROFINET IO. [S7]

Selection fit: Fieldbus coupler SKU for PROFINET IO modular I/O. [S16]

Industrial Switch

Documented series: 852-111 Industrial ECO Switch.

WAGO Corporation documents an industrial Ethernet switch offering. [S18]

  • 852-111 Industrial ECO Switch. [S8]

Selection fit: Compact five-port 100Base-TX industrial Ethernet switch in the WAGO 852 industrial switch family. [S19]

Protocol Gateway

Documented series: WAGO 750-658 CAN Gateway.

WAGO documents 750-658 as a CAN Gateway protocol gateway offering. [S9]

  • WAGO 750-658 CAN Gateway. [S9]

Selection fit: Protocol gateway procurement for CAN/CANopen integration into WAGO I/O architectures. [S21]

Relay Module

Documented series: WAGO 859-354 relay module

WAGO documents item 859-354 as a finished 6 mm industrial relay module. [S10]

Input and contact
The exact module uses a 24 V AC/DC nominal input and one changeover contact. [S23]
Width and indication
Item 859-354 is 6 mm wide and includes a red status indicator. [S24]
  • WAGO 859-354 relay module [S10]

Selection fit: Confirm input voltage, contact arrangement, load rating, terminal system and accessory requirements by exact WAGO item. [S25]

Remote Io Module

Documented series: WAGO 750-363 EtherNet/IP fieldbus coupler for modular remote I/O.

WAGO supplies modular remote I/O, controllers, and electrical interconnection technology. [S11]

  • WAGO 750-363 EtherNet/IP fieldbus coupler for modular remote I/O. [S11]

Selection fit: Modular IP20 remote I/O head station for EtherNet/IP control networks. [S27]

Signal Repeater

Documented series: WAGO 857-400 JUMPFLEX isolation amplifier / signal conditioner.

WAGO Corporation documents a JUMPFLEX isolation amplifier / signal conditioner. [S12]

Documented specifications for Signal Repeater
StandardDIN EN 61010-1 [S31]
Service temperature850 °C [S32]
  • WAGO 857-400 JUMPFLEX isolation amplifier / signal conditioner. [S12]

Selection fit: Analog signal isolator SKU distinct from WAGO I/O terminal blocks alone. [S29]

Product range and documented series

WAGO documents 879-3000 as an exact MID24 energy meter. [S6]

  • WAGO 879-3000 Energy Meter MID24 [S6]Source note: WAGO 879-3000 Energy Meter MID24
  • WAGO 750-375 Fieldbus Coupler PROFINET IO. [S7]Source note: WAGO 750-375 Fieldbus Coupler PROFINET IO.
  • 852-111 Industrial ECO Switch. [S8]Source note: 852-111 Industrial ECO Switch.
  • WAGO 750-658 CAN Gateway. [S9]Source note: WAGO 750-658 CAN Gateway.
  • WAGO 859-354 relay module [S10]Source note: WAGO 859-354 relay module
  • WAGO 750-363 EtherNet/IP fieldbus coupler for modular remote I/O. [S11]Source note: 750-363 EtherNet/IP fieldbus coupler
  • WAGO 857-400 JUMPFLEX isolation amplifier / signal conditioner. [S12]Source note: WAGO 857-400 JUMPFLEX isolation amplifier / signal conditioner.

Procurement fit

The procurement scope is restricted to the exact catalog numbers documented. The 879-3000 Energy Meter MID24 is specified to the exact catalog number without manufacturing location claims. The 750-375 is the fieldbus coupler SKU for PROFINET IO modular I/O. The 852-111 is a compact five-port 100Base-TX industrial Ethernet switch. The 750-658 is the CAN gateway for CAN/CANopen integration into WAGO I/O architectures. The 859-354 relay requires confirmation of input voltage, contact arrangement, load rating, terminal system, and accessory requirements by exact WAGO item. The 750-363 serves EtherNet/IP networks, and the 857-400 is a distinct signal isolator SKU.

Technical capabilities

Documented parameters are tied to specific SKUs. The 879-3000 Energy Meter MID24 supports direct connection at 65 A and 3 × 230/400 V and 50 Hz, with Modbus, M-Bus, two S0 outputs, and a four-module DIN footprint. The 852-111 is a five-port 100Base-TX industrial Ethernet switch. The 859-354 relay module has a 24 V AC/DC nominal input, one changeover contact, 6 mm width, and a red status indicator. The 750-375 and 750-363 are modular fieldbus couplers for PROFINET IO and EtherNet/IP. The 750-658 is a CAN gateway, and the 857-400 is a JUMPFLEX isolation amplifier and signal conditioner.

Markets and applications

Documented application context is inferred strictly from the listed product interfaces and form factors. The 879-3000 Energy Meter MID24 with Modbus, M-Bus, and S0 outputs is suited to sub-billing or load monitoring on three-phase 230/400 V systems. The 750-375, 750-363, and 750-658 couple PROFINET IO, EtherNet/IP, and CAN/CANopen segments respectively into modular I/O architectures. The 852-111 provides 100Base-TX connectivity at the machine or cabinet level. The 859-354 handles low-power switching within a 6 mm DIN footprint, and the 857-400 isolates analog signals. Specific end markets, verticals, and reference installations are not publicly documented.

Evidence limitations

Buying fields not addressed by the documented facts include manufacturer-issued certifications, agency approvals, MTBF figures, warranty terms, lead times, and authorized distributor lists. The load rating, terminal system, and accessory requirements for the 859-354 relay are not publicly documented beyond the 24 V AC/DC input and single changeover contact. The 852-111 Industrial ECO Switch lacks documented switching capacity, operating temperature, and ingress rating. The 857-400 isolation amplifier is presented without input and output range, accuracy class, or supply voltage. The 879-3000 lacks documented accuracy class or MID certificate details. Corporate history, employment count, revenue, and reference customers are not publicly documented.

Editorial summary

WAGO Corporation is cataloged in the United States, with the supplier listing the city of Germantown. The documented product categories within this profile are electricity meter, fieldbus gateway, industrial switch, protocol gateway, relay module, remote io module, and signal repeater. Each category is represented by a specific catalog series drawn from the WAGO product numbering system. The manufacturer is presented strictly through the catalog numbers and their published connection, interface, and mounting parameters, with no corporate history, employment figures, or third-party rankings introduced.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Identity and location are retained from the cited official source. Product facts and visual are limited to WAGO 879-3000 Energy Meter MID24; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S14]Company-stated
  • Coverage is limited to cited first-party fieldbus gateway facts. [S17]Company-stated
  • Coverage is limited to cited first-party industrial switch facts. [S20]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to WAGO 750-658 CAN Gateway.; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S22]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to WAGO 859-354 relay module; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S26]Company-stated
  • Coverage is limited to cited first-party remote I/O facts. [S28]Company-stated

Frequently asked questions

What Electricity Meter product is documented for WAGO Corporation?

The retained product material names WAGO 879-3000 Energy Meter MID24. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published connection and supply should a buyer compare?

The cited product material records: The meter supports direct connection to 65 A at 3 × 230/400 V and 50 Hz. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published interfaces and mounting should a buyer compare?

The cited product material records: It provides Modbus, M-Bus, two S0 outputs and a four-module DIN footprint. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S14]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.