A turntable pallet stretch wrapper sized for standard 1100×1200 mm loads lists at roughly USD 2,500-4,500 FOB China for a mechanical unit, USD 5,500-8,500 for a power pre-stretch model, and USD 12,000-18,000+ for robotic or rotary-ring machines, per current Made-in-China category data [S1][S5].
Cost is driven by four spec gates: turntable diameter (1500/1650/1800 mm), master/wrap height, pre-stretch ratio (mechanical 1:1 vs power 200-300%), and whether the unit ships with PLC, weighing, and an automatic film-cut clamp. The Youngsun MH-FG-2000PA datasheet is a useful benchmark: 1500 mm turntable, 2400 mm master height, 0-10 rpm, 1 Ph AC 220/110 V 50/60 Hz, 1500-2000 kg payload, 100 g weighing resolution, LLDPE film width ≤500 mm [S3].
Price Tiers by Machine Class
Three classes dominate B2B sourcing, each tied to throughput and labor model rather than pallet count alone [S1].
Manual / semi-automatic turntable wrappers (entry) sit in the USD 2,500-4,500 FOB band; the operator attaches film, presses start, and cuts the tail. These fit operations under ~50 pallets/shift where labor is cheap and pallet mix is uniform. Robotic and rotary-ring wrappers (premium) run USD 12,000-18,000+ and are specified when pallet variability is high or floor space is constrained. Made-in-China's stretch-wrapping category pages list all three classes from multiple audited Chinese OEMs [S1][S5].
Spec Gates That Move the Quote
Vendors do not price by SKU alone — four parameters change the line item materially [S3].
Turntable diameter: 1500 mm is the standard EUR-pallet fit (1500 kg capacity on Youngsun's reference build); 1650 mm jumps capacity to 2000 kg; 1800 mm is specified for oversized chemical or steel coils. Wrap height / master column: 2400 mm is the default; 2700, 3000, 3200, and 3400 mm options add roughly USD 300-600 each. Pre-stretch ratio: mechanical (1:1) is cheapest, power pre-stretch (200-300%) adds USD 800-1,500 but pays back in 6-12 months on film savings above ~80 pallets/day. Controls & weighing: PLC + HMI + 100 g load-cell weighing (as on the MH-FG-2000PA) typically adds USD 1,200-2,000 over a relay-logic baseline [S3].
Film Cost: The Hidden 60% of TCO
For a working stretch wrapping machine the machine itself is often less than 40% of five-year cost; LLDPE stretch film is the line item that decides the ROI case. [S1]
Hand-grade LLDPE film (17-23 µm) runs USD 1.8-3.2/kg FOB; machine-grade pre-stretch rolls (width ≤500 mm, OD ≤280 mm on the Youngsun reference) run USD 2.5-4.0/kg [S3]. Over 250 working days × 200 pallets/day, the difference between a mechanical 1:1 and a 300% power pre-stretch is on the order of USD 8,000-12,000/year in film alone — substantially more than the stretch in machine price. Specifying LLDPE stretch film grade and pre-stretch ratio together is the single highest-leverage buying decision on this equipment class.
Total Cost Build Beyond the Sticker
FOB price is the start of the cost conversation, not the answer; six line items routinely double the budget for new buyers [S1][S4].
Indian stretch wrapping machine manufacturer Innovative WrapTech, based in Ahmedabad, Gujarat, provides a 1-year warranty against manufacturing defects and 72-hour service support at the customer's door step [S4]. Plan the budget at roughly 1.6-1.8× the headline FOB figure once the machine is producing pallets on your floor.
Use-Case Fit: Who Each Class Is For
Manual turntables still make sense for under 50 pallets/shift, single SKU, no growth plan — and for food retail / produce operations doing stretch wrapping of fresh trays where machine-grade film is overkill [S2].
Automatic turntable wrappers with power pre-stretch are the right answer for 80-300 pallets/shift in FMCG, beverage, and 3PL operations. Robotic wrappers and rotary-ring systems suit >300 pallets/shift, mixed pallet sizes, or cold-chain facilities where the unit must move to the pallet rather than the pallet to the unit. Heavy industrial coil wrapping — for example, prestressed concrete (PC) wire coils — is a separate machine class altogether: 4-corner-conveyor or orbital ring designs built for 2-5 tonne coils, not turntable units [S6]. Comparing a turntable quote against a coil-wrapper quote is an apples-to-oranges mistake; lead times, film consumption, and footprint all differ by an order of magnitude. FMCG and warehousing buyers comparing storage and handling kit will also want to cross-reference warehouse racking and AMR fleet decisions at the same time, because the stretch wrapper sits in the same end-of-line cell.
Standards, Warranty, and Sourcing Reality
There is no single global standard that "certifies" a stretch wrapper the way CE/UL certify a control panel; what matters is the OEM's build compliance and the after-sales chain [S4].
CE marking on the control enclosure and conformance to IEC 60204-1 (electrical equipment of machines) is the baseline expectation for European-bound units. For plants already running Industry 4.0 / OPC-UA lines, ask the OEM explicitly about PLC brand (Siemens S7-1200, Omron CP1, Mitsubishi FX5 are the common choices) and protocol support before quoting — retrofitting a different PLC post-shipment is typically 8-12% of machine price. Warranty is the second hard constraint: 1 year is the de-facto market standard across Chinese and Indian OEMs (Innovative WrapTech publishes 1 year explicitly) [S4]; 2-3 year extensions are negotiable but rarely free. For higher-value purchases, demand the warranty exclusions list in writing — film carriage belts, turntable drive chain, and photo-eye lenses are the three items most warranty-voided by "consumable" clauses.
How to Read a Quote From a Chinese OEM
A clean turntable quote from an audited Made-in-China supplier should specify at least nine data points; if any are missing, treat it as a draft, not a quote [S1][S3][S5].
Insist on: (1) turntable diameter and capacity in kg; (2) master / wrap height; (3) power supply and phase; (4) pre-stretch ratio; (5) PLC brand and HMI screen size; (6) film spec (width, core ID, max OD); (7) pallet height detection method (photo-eye vs mechanical cam); (8) warranty length and exclusions; (9) commissioning cost and who pays the technician's travel. Youngsun's published spec sheet hits all nine, which is why it is a reasonable benchmark for any quote you receive [S3]. For comparison-shopping beyond a single supplier, the [Made-in-China stretch wrapping machine supplier page](/encyclopedia/stretch-wrapping-machine.html) is the fastest way to see the price band across multiple audited Chinese OEMs in one view [S1][S5]. Sourcing teams who also handle line-integration kit will want to check pricing peers such as vibratory feeder costs to keep the end-of-line CapEx consistent per meter of conveyor.
Track three signals over the next 90 days for budget planning: LLDPE resin spot price (drives film cost, the largest TCO line); OEM 2026 warranty terms (whether 2-year coverage becomes the new default in the China-India corridor); and pre-stretch carriage replacement-part pricing (the line item most often missed in the year-3 maintenance budget).
For component-level specifications, see wrapping machine.