Gravity Thickener

A gravity thickener is a large tank, most often circular, in which dilute slurry or sludge settles under gravity while a slow rotating rake mechanism plows the settled solids toward a central underflow outlet, producing a dense underflow for dewatering, disposal, or return to process, and a clarified overflow that the plant reuses or discharges. Feed enters through a feedwell that dilutes and disperses flocculant conditioned solids into the settling zone, the rake keeps the bed moving and prevents rat-holing, and the difference between feed and underflow solids concentration is the machine's entire purpose. Metso's thickener ranges and its published thickening guides are representative industrial references, and this page treats the complete tank, mechanism, drive, and control package as the purchasing object.

This page is written for the engineer specifying a gravity thickener for a municipal wastewater plant, a mine tailings line, or a process slurry densification duty. It works through what the machine does and what is being bought, how settling, flocculation, and the rake bed interact, which thickener designs fit which duties, the parameters that appear on vendor data sheets, and the selection factors and RFQ language that decide whether the thickener meets its underflow density and overflow clarity for a torque and wear budget that stays predictable.

Plant liquid filtration and settling hardware of the class surrounding thickener installations, shown as an industrial filter housing

Photo: Agne27, CC BY-SA 3.0, via Wikimedia Commons

The decision concentrates in five places: the solids' settling character and the flocculant regime that conditions them, the duty, water recovery or underflow density or both, the machine class, conventional, high-rate, or high-density paste, the tank diameter and rake drive torque that deliver the design solids loading, and the underflow pumping and bed control strategy that holds the density steady. Get those right and the feedwell, launders, and instrumentation follow with little freedom.

Chapter 1 / 06

What a Gravity Thickener Is and What Is Being Decided

The machine this page describes is a flat-bottomed or cone-bottomed tank from a few meters to well over a hundred meters in diameter, steel, concrete, or a steel tank on a concrete base, fitted with a bridge or column mounted rake mechanism that turns once every few minutes to a quarter hour. Dilute feed enters a feedwell at the center or periphery, flocculated solids settle into a compression bed, the rake arms plow them to the center cone for withdrawal by an underflow pump, and clarified water overflows peripheral launders into a reuse or discharge header. Bed level, bed mass, and rake torque are measured, and the underflow density they support is the product.

What is being decided when a gravity thickener is purchased is an underflow solids concentration and an overflow clarity guarantee backed by a torque and availability statement. The buyer is purchasing a stated percent solids in the underflow from a stated feed solids and flow, with an overflow that meets a stated suspended solids limit, at a rake drive power and flocculant dose the vendor should be able to predict from settling tests on the actual solids. Everything on the vendor data sheet, diameter, side water depth, rake torque rating, feedwell size, exists to support those guarantees, and the honest vendor sizes from cylinder and bench settling work, not from an analogy to someone else's sludge.

The gravity thickener sits in the liquid solids family with defined neighbors. It is the densification step between a biological process and dewatering: a membrane bioreactor, a sequencing batch reactor, a moving bed biofilm reactor, or a trickling filter produces dilute sludge that the thickener concentrates before a screw press or a filter press dewaters it, and a dissolved air flotation unit can precede or replace it on greasy or fragile sludges. It is not a clarifier, which polishes large flows at low solids for clarity rather than density, though the two machines share settling physics and the same tank vocabulary. Upstream, a bar screen or a rotary drum screen protects the works from rags and grit that would wind onto the rake.

Different buyers buy the same machine for different duties. A municipal wastewater plant thickens waste activated sludge from a fraction of a percent to three or five percent to shrink the dewatering and digestion load, valuing gentle handling of fragile floc and odor control. A mine thickens tailings from the grinding and flotation circuit, valuing water recovery for reuse and an underflow that supports the disposal plan, from pumped dilute tailings to thickened paste. A chemical or minerals plant thickens process precipitates, gypsum, magnesia, red mud, where solids loading and scale control govern. A coal preparation plant thickens fine refuse. The specification language differs, but the settling and compression physics is shared.

The economics deserve their own paragraph because the thickener is the cheapest water the plant will ever buy. Every cubic meter recovered as overflow is a cubic meter not drawn from the river, not pumped from the bore, and not paid for twice in reagent that leaves with the tailings; on a large concentrator the thickener pays for itself in water alone. Underflow density is the second lever: a few points of extra percent solids shrink the dewatering fleet downstream, cut the polymer dose at the screw press or filter press, and reduce the volume of everything that must be hauled or stacked. Flocculant consumption, rake energy, and drive maintenance set the operating cost, and they are trivial next to the water and density the machine controls.

A short tour of named duties makes the machine concrete. At a municipal plant, waste activated sludge from the biological stage, sometimes blended with primary sludge ahead of an anaerobic digester, thickens in a modest diameter tank at low solids loading, polymer conditioned, raked gently. At a copper concentrator, flotation tailings at twenty to forty five percent of plant water flow report to a high-rate thickener of a hundred meters or more, returning clear water to the grinding and flotation cells, in this encyclopedia's own pages the flotation cell neighbors are described in their own topic. At a paste plant, high-density thickeners with steep cones and high torque rakes deliver sixty to seventy percent solids underflow for surface stacking or backfill. Each duty names the same knobs, settling rate, flocculant, torque, and bed, with numbers that scale while the compression physics barely changes.

Chapter 2 / 06

How Settling, Flocculation, and the Rake Bed Do the Work

The mechanism is hindered settling into compression. Individual particles or flocs settle at a rate set by their size and density against the drag of the surrounding suspension; as the concentration rises downward through the tank, particles interfere, the settling becomes hindered, and below the hood of the settling zone the solids enter compression, where the weight of the bed itself squeezes water out of the layers beneath. The thickener's depth buys compression time, and its area buys settling capacity: the design solids loading, kilograms of dry solids per square meter per hour, comes from settling column tests interpreted at the target underflow concentration.

Flocculation is what makes modern thickening dimensions possible. Coagulants neutralize surface charges so particles approach; flocculants, high molecular weight polyacrylamides in dilute solution, bridge particles into large fast settling flocs. The feedwell is the mixing chamber: feed and flocculant meet, energy is dissipated in a controlled profile so flocs grow without shearing apart, and the conditioned stream is released below the surface into the settling zone. Too little mixing underflocculates, fine solids escape to the overflow; too much breaks the flocs that were just built. Dilution of the feed inside the feedwell, with clarified overflow water, is a standard trick on dense feeds because settling improves when the feed zone is thinner.

The rake has three jobs. It transports settled solids to the cone so the underflow can withdraw them, it breaks channels and reworks the bed so compression water can escape, and its arms carry the torque signature that tells the operator what the bed is doing. In conventional designs two long arms turn from a central cage; in high torque designs the arms are truss reinforced, sometimes with auxiliary arms, and the drive measures torque continuously. Torque rises with bed depth, bed density, and rake binding; the control system alarms at a threshold and, on machines so equipped, lifts the rake hydraulically to ride out a surge or a stiff bed rather than trip or bend.

Bed control is the operating craft. The bed interface, the boundary between clear supernatant and compressed solids, is held by balancing underflow withdrawal against feed: pull too hard and the bed drains and density falls, pull too little and the bed rises toward the launders and solids escape. Bed mass instruments, pressure sensors at the tank floor, and nuclear or ultrasonic bed level probes give the operator the signals, and modern plants close the loop from bed mass or density to the underflow pump speed. Flocculant dose trims the settling rate, and feedwell dilution trims the feed zone viscosity. A thickener without instrumentation still works, but only in the sense that it settles for whoever is patient enough.

Overflow clarity and underflow density pull against each other, and the design acknowledges the trade. High overflow rate, the flow per unit launder area, carries fines out; low overflow rate wastes tank diameter. High underflow density demands deep beds, long retention, and torque capacity; low density underflow pumps easily but pushes water downstream. The selection fixes the geometry, and the operation lives inside it: the operator trades clarity for density daily with the underflow valve, and the spec's guarantees should state both numbers with their test basis so the trade is honest from commissioning.

Scaling and consolidation are the honest failure modes. Gypsum, magnesium hydroxide, and lime sludges plate onto rakes, launders, and tank walls until the mechanism carries tons of scale; high-density designs add steep cone angles, rake blades that resist buildup, and flush connections to fight it. Fragile biological flocs shear in the feedwell and refuse to re-flocculate, so municipal machines run gentler and accept lower loading. Fine clay tailings consolidate slowly and can gel, needing cone flushing and occasional bed drainage. None of these are defects of the machine, but each one changes the sizing, the materials, or the maintenance plan, which is why the solids characterization precedes the tank selection in every serious specification.

The underflow system completes the hydraulics and often caps the density. What the rake delivers to the cone must leave through a line and a pump sized for the solids: dilute municipal underflow moves on a sludge pump or sewage pump of ordinary duty, while dense tailings underflow demands a progressive cavity or other positive displacement pump, short lines, generous flushing, and a standby unit, because a set underflow line sanding shut is the classic thickener outage. Cone angle, withdrawal point design, and agitated cones in the paste classes all exist to keep the solids moving the last meters, and an RFQ that treats the underflow as an afterthought buys a tank whose density ceiling is set by its piping rather than its torque.

Chapter 3 / 06

Thickener Types, Duty Classes, and Machine Boundaries

Conventional thickeners are the baseline class: a feedwell, a settling zone, a compression zone, and a rake of moderate torque, sized at conservative solids loadings, robust to feed swings, and simple to operate. They still serve small plants, variable solids, and duties where the vendor cannot characterize the material well enough to promise more. Their diameter is their cost driver, so when area is expensive plants move up the classes that buy density with depth, torque, and chemistry instead of diameter.

High-rate thickeners shrink the diameter by doing the flocculation properly. An engineered feedwell that dilutes and mixes flocculant inline lets the tank run at several times the conventional solids loading, because well built flocs settle fast and the settling zone no longer needs to be huge. Most mine tailings and many municipal machines sold today are this class. The trade is sensitivity: high rate designs need steady feed and a working flocculant system, and a plant that will not control chemistry should buy the bigger tank instead.

High-density and paste thickeners push into compression. Deeper tanks with tall mud columns, steeper floor slopes or bottom cones, much higher rake torque ratings, and sometimes rake lift on hydraulics deliver underflows from thickened tailings at sixty percent solids to true paste at higher, material that stacks or flows to backfill without further dewatering. Torque per meter of diameter is the class signature, an order of magnitude above conventional duty, and the drive, the rake structure, and the underflow system, positive displacement or high head centrifugal pumps, are all bought for the density the process demands.

Rectangular and basin forms exist but circular dominates: the rake sweeps every radius with one mechanism, launders are simple, and the concrete or steel shell is the cheapest per area. Tray and multi-deck designs stack settling zones for tight footprints in old plants, accepting mechanical complexity. Clarifier-thickener combinations, an outer clarifying rim with an inner thickening zone, serve plants that need both clarity and density from one structure, common in municipal primary treatment where primary sludge thickens in the same tank that polishes the main flow.

Adjacent machines mark the boundary, and two are close enough to name carefully. The gravity belt thickener and the rotary drum thickener are mechanical thickeners, a filter belt or a rotating screen doing the drainage in minutes without a settling tank; they suit small footprint municipal sludge duties and appear as neighbors here, not as variants of this machine, and this page leaves them outside its scope. Downstream, the screw press, the filter press, and the decanter centrifuge, or on oily fine streams a disc stack centrifuge, dewater what the thickener concentrates, and the dissolved air flotation unit competes upstream on oily or fragile sludges. The vacuum belt filter handles washing duty that a thickener cannot, and where a reuse stream must be polished beyond what the overflow launders deliver, a multimedia filter follows the tank. Within settling equipment itself, the clarifier is the clarity first sibling already named, and this page is the density first machine.

Chapter 4 / 06

Key Specification Parameters

The vendor data sheet for a gravity thickener centers on diameter, depth, torque, and loading, and each number carries a sizing consequence. The table below lists the parameters that recur across manufacturers' catalogs, with the typical ranges a buyer will see across the conventional, high-rate, and paste classes. Values for a specific project come from settling tests on the actual solids, and the ranges here are orientation, not a substitute for testwork.

ParameterTypical catalog rangeWhat it decides
Tank diameter3 to 150 mSettling area; solids loading at design feed
Side water depth2 to 8 m conventional; deeper for pasteCompression zone volume; underflow stability
Rake drive torque ratingtens of kN-m to over 1,000 kN-mBed weight the rake can move; density ceiling
Rake speed0.02 to 0.3 rpmBed reworking; floc shear; torque signature
Solids loading, design20 to 400 kg dry solids per m2 per h by classClass and diameter; flocculant dependence
Rise rate, design0.3 to 3 m3 overflow per m2 per hOverflow clarity; fine solids escape
Underflow solids, municipal3 to 6 percent by massDownstream dewatering load; digester feed
Underflow solids, tailings45 to 70 percent by mass by classWater recovery; disposal or paste method

Three of these numbers deserve the buyer's suspicion when they arrive without a basis. Solids loading quoted from another plant's ore is the classic error, clays and precipitates settle nothing alike, and the honest vendor cites the settling test that produced the number. Torque ratings quoted without the rake arm geometry they apply to flatter the drive. Underflow densities quoted at zero flocculant or at unbounded flocculant dose are both useless, the first is pessimism, the second is a polymer bill the plant will pay forever. An RFQ that asks for the basis of each figure separates engineered offers from assembled ones.

Materials and construction follow the duty. Municipal machines run epoxy coated steel or concrete with stainless fittings; mining machines run wear plate floors in abrasive service, sometimes with polyurethane rake blades; gypsum and scale prone duties add smooth sloped surfaces and flush piping. The drive is a slewing bearing and gear or hydraulic power unit, sized with the torque margin the class demands, and rake lift, when specified, is a hydraulic system that must be maintained as plant of its own. Launders, feedwell, and instrumentation, bed level, bed mass, turbidity on overflow, density on underflow, complete the machine, and their quality decides whether the operators can actually run the guarantees they bought.

Chapter 5 / 06

Selection Decision Factors and RFQ Language

Selection starts with the solids, not the catalog. Settling cylinder tests and, for paste duty, rheology on the flocculated underflow give the design loading and the torque picture; municipal sludges are characterized by type and source, waste activated, primary, blended, digested, because handling requirements differ. The duty definition, water recovery target, underflow density target, overflow clarity limit, comes from the flowsheet, and only then does the machine RFQ convert the duty into a tank. A buyer who skips the testwork buys a diameter that belongs to someone else's solids.

The class choice follows the value of diameter and density. Where water is scarce or permits bind, paste classes buy density with torque and depth and repay themselves in pipeline water and dam volume. Where land is cheap and solids are variable, conventional classes forgive what high-rate designs punish. Where footprint is the constraint, mechanical thickeners, the gravity belt and rotary drum neighbors, or the dissolved air flotation unit may win the slot instead, and the honest selection compares across the boundary rather than assuming a tank. Retrofit options, feedwell upgrades, flocculant systems, rake reinforcement, extend existing tanks up a class for less than a new shell.

The table below organizes the decision into the factors that recur across projects, with the questions the buyer should be able to answer before the RFQ goes out. Each row is a place where an incomplete answer turns into an underspecified tank and a density argument later.

Decision factorWhat the buyer must stateConsequence if left open
Solids characterizationSolids type, settling test results, rheology for paste dutyLoading and torque guessed; guarantee is void
Feed and dutyFlow and feed percent solids, target underflow percent, overflow limitDiameter and depth wrong; density never reached
Class selectionConventional, high-rate, high-density, paste intentOverbuilt tank or unmet disposal requirement
Flocculant regimePolymer type and dose basis, dilution water schemeOperating cost unbounded; overflow fails
Underflow systemUnderflow pump type, distance, flushing provisionsDensity capped by pumping, not by the tank
Climate and siteWind zone for large tanks, freezing provisions, seismic areaStructure and launder design mismatched
Downstream planDewatering by screw press, filter press, or decanter centrifuge; disposal methodInterface densities and storage volumes undefined

RFQ language for a gravity thickener should name the duty and the basis of guarantee. A workable specification states: solids source and characterization with settling test data; design and maximum feed flow at stated percent solids; required underflow percent solids and overflow suspended solids limit; intended class and any torque margin or rake lift requirement; flocculant system scope and dose basis; drive torque rating with arm geometry; instrumentation scope, bed level, bed mass, torque, density, turbidity; underflow pump interface and flushing; and the acceptance basis, water commissioning followed by a performance window at design feed against the guarantees. Naming the neighbors helps the vendor price interfaces, the sewage pump or sludge pump on municipal underflow, the decanter centrifuge or screw press downstream, and any anaerobic digester receiving thickened sludge, so the connections land in the right bids.

Two commercial clauses separate serious bids from thin ones. The first is the guarantee basis: whether the vendor guarantees performance at the stated flocculant dose and feed character, or only the mechanical availability of the tank, and what test regime settles a shortfall, because a density guarantee without a measurement protocol is a wish. The second is the spares and wear scope: rake blades, drive spares, wear plate, and the underflow pump wears as a priced package with delivery times, since a thickener that waits a season for a drive component is a water recovery plan that stopped. Buyers who ask both questions in the RFQ receive offers that can actually be compared, and the rest of the evaluation, price per square meter, torque per dollar, is arithmetic.

Chapter 6 / 06

Installation, Standards, Failure Modes, and Maintenance

Installation is a civil job with a mechanism job at the end. Large diameter tanks are cast or erected on engineered foundations that must be flat to the tolerance the rake design assumes, because a floor out of level loads one arm and starves the other. The bridge or column, the cage, the arms, and the drive go up as a lift plan, launders and feed piping follow, and the mechanism is checked for sweep clearance before water. Water commissioning proves the drive under buoyed load, the torque instrumentation, and the underflow piping before solids enter, and flocculant systems are flushed and calibrated with the same water. The vendor's field engineer typically stays through first feed and the initial torque and density survey, and an RFQ should price that presence explicitly.

Standards for these machines are practical rather than prescriptive. Tank structural design follows the structural code framework of the jurisdiction for steel and concrete vessels, large diameters add wind and seismic checks, and drives, lifting hydraulics, and guarding follow machinery safety practice. There is no single international thickener standard that governs the machine end to end, so the RFQ must name the applicable structural, electrical, and guarding codes and the vendor's own manufacturing standards for drive rating and rake alignment. Any edition reference in the project documents should be checked against the current issue at purchase time rather than copied from an old specification.

The recurring failure modes are few and mostly slow. Rake binding from a stiff bed or an object in the tank drives torque to the alarm and the lift; if the lift is absent or slow, arms bend and drive repairs follow. Scale accumulation, already named for gypsum and lime duties, quietly adds torque and eventually freezes the mechanism for a cleaning outage. Underflow lines sand up when withdrawal stops or dilutes, so flushing connections and a standby underflow pump, a sludge pump or sewage pump by duty, are standard. Floc carryover to the overflow traces to feedwell damage, underdose, or a rising bed. Drive and bearing faults follow the usual slow machinery statistics, announced by torque signatures long before failure.

Maintenance planning is interval driven around the rake and the underflow. The table below lists the checks with the typical cadence a plant will schedule, assembled from common vendor practice; actual intervals follow the solids, the scale tendency, and the plant's utilization and should be set from the first months of operating data.

ItemTypical actionTypical cadence
Rake drive and torque systemTorque trend review, lubrication, calibrationWeekly review, service quarterly
Rake arms and bladesInspect wear, scale, and clearance; clean as neededMonthly to quarterly
Feedwell and flocculant systemInspect baffles, clean nozzles, calibrate dosingMonthly
Underflow line and pumpFlush, verify density reading, exercise standbyWeekly
Launders and overflowClean, check weir level and turbidity instrumentMonthly
Bed level and bed mass probesCalibrate against manual surveysQuarterly
Tank shell and foundationVisual survey, coating checksAnnual

Long term care keeps the guarantees honest against feed drift. As a mine deepens or a municipality's sludge changes, the settling character shifts, and the loading that was right at commissioning slowly becomes punishing; periodic settling tests, loading reviews, and flocculant optimizations recover the capacity or the clarity that quietly left. Mechanism upgrades, better feedwells and higher torque drives, are offered for legacy tanks and often move a conventional machine up a class. The plant that treats the thickener as the water and density valve of the flowsheet, measured and tuned, is the plant whose downstream dewatering fleet is still correctly sized in year ten.

FAQ

What is the difference between a gravity thickener and a clarifier?

A clarifier is a clarity first machine: it polishes a large low solids flow and produces a clean overflow, accepting a dilute sludge underflow. A gravity thickener is a density first machine: it concentrates a solids rich feed into the densest underflow the material allows while keeping an acceptable overflow. The settling physics is shared and hybrid clarifier-thickener tanks exist, but the sizing drivers differ, clarifiers by rise rate, thickeners by solids loading and torque.

How is gravity thickener size determined?

Area follows the design solids loading from settling tests on the flocculated material, kilograms of dry solids per square meter per hour, at the target underflow concentration. Depth follows compression retention and, in paste classes, the mud column the density demands. Torque follows the bed mass and rake geometry, with class dependent margins. Rise rate checks the overflow clarity. All four checks must pass together; area alone can still leave a tank that clarifies or densifies poorly.

What do high-rate, high-density, and paste thickeners mean?

High-rate thickeners use engineered feedwells and inline flocculation to run several times the conventional solids loading, buying diameter with chemistry. High-density thickeners add depth, steeper floors, and much higher rake torque to push underflows into the thickened tailings range. Paste thickeners are the extreme of the same direction, delivering underflow that behaves as paste for stacking or backfill. The classes are a continuum of torque and density, not separate machines.

Are gravity belt thickeners and rotary drum thickeners the same machine?

No. Those are mechanical thickeners: a gravity belt thickener drains flocculated sludge on a moving filter belt, and a rotary drum thickener screens it inside a rotating drum, both in minutes and a small footprint. This page's machine is a settling tank with a rake, sized by solids loading, that needs no filter media. The mechanical units suit cramped municipal plants; the tank suits large flows and mining duty where consumable belts are unattractive.

What drives rake torque and why does it matter?

Torque follows the bed mass the arms plow, the bed's consistency, and the friction of scale and settled solids on the floor. It matters because torque is the drive's sizing number, the safety system's alarm basis, and the operator's window into the bed: rising torque means a densifying or stiffening bed, and the response, lift, flush, or faster withdrawal, protects the mechanism. Undersized torque caps the underflow density the tank can actually reach regardless of its diameter.

What should a gravity thickener RFQ include?

State the solids source with settling test data, design and maximum feed flow at stated percent solids, required underflow percent solids and overflow suspended solids limit, intended class with torque margin and rake lift requirements, flocculant system scope and dose basis, instrumentation list, underflow pump interface and flushing, structural codes for the site, and the acceptance basis at design feed. Naming downstream equipment, a screw press, filter press, or decanter centrifuge, lets vendors bid the interfaces correctly.

Why does underflow density matter so much downstream?

Every point of underflow solids is water that stays out of the dewatering stage: dilute underflow forces larger screw presses, filter presses, or centrifuges, higher polymer doses, and larger hauling volumes. Density also defines the disposal method, pumped tailings, thickened stacking, or paste backfill each assume a solids range. The thickener is usually the cheapest place in the plant to remove water, so underflow targets set the economics of everything after it.

Sources

  1. Metso high-rate thickeners
  2. Metso beginners guide to thickeners
  3. Metso thickening and clarifying
Ask SpecForge AI