Manufacturer profile

Siemens AG

Siemens AG is a manufacturer based in Munich, Germany. [S2][S1]

Country
Germany [S1]
City
Munich [S2]
Siemens SIVACON 8PS LData busbar trunking system
Official product image [S83]

Evidence scope

The retained official product route documents: Siemens AG manufactures SIVACON low-voltage switchboards and SIVACON 8PS busbar trunking systems from Germany. This dossier uses that cited route as the editorial scope. [S12]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S20]

Busway

Documented series: Siemens SIVACON 8PS LData busbar trunking system

Siemens AG manufactures SIVACON low-voltage switchboards and SIVACON 8PS busbar trunking systems from Germany. [S12]

Documented specifications for Busway
Materialaluminum [S14]
Service temperature25° C [S15]
Flame / recognitionUL approved [S16]
Supply length1.22m [S17]
  • Siemens SIVACON 8PS LData busbar trunking system [S4]

Selection fit: SIVACON 8PS LData busbar trunking for data-center power distribution, documented alongside BD2 and other 8PS systems as a compact alternative to cable runs. [S13]

Circuit Breaker

Documented series: Siemens 3WA air circuit breakers / low-voltage switchgear

Siemens AG develops industrial automation, electrification and low-voltage power distribution systems. [S18]

  • Siemens 3WA air circuit breakers / low-voltage switchgear [S5]

Selection fit: 3WA air circuit breakers for low-voltage power distribution and switchgear protection. [S19]

Contactor

Documented series: SIRIUS industrial contactors and controls

Siemens manufactures industrial automation, electrification and digitalization systems. [S21]

  • SIRIUS industrial contactors and controls [S6]

Selection fit: SIRIUS portfolio documents contactors with matching motor protection devices. [S6]

Hmi Panel

Documented series: Siemens SIMATIC HMI Unified Panels

Siemens documents SIMATIC HMI Unified Panels as finished industrial operator-interface families. [S7]

Display range and touch operation
The family spans Basic Panels from 4 to 12 inches and Comfort Panels from 7 to 22 inches, with multi-touch operation documented for the range. [S22]
Industrial communication
The official page documents Gigabit Ethernet and separates rugged variants by configuration. [S23]
  • Siemens SIMATIC HMI Unified Panels [S7]

Selection fit: SIMATIC is a Siemens product brand; screen sizes, touch behavior and ruggedization remain family- or variant-scoped. [S24]

Industrial Modem

Documented series: Siemens SCALANCE M industrial modem/router family.

Siemens AG documents SCALANCE M industrial communication offerings. [S8]

  • Siemens SCALANCE M industrial modem/router family. [S8]

Selection fit: Industrial modem-class SCALANCE SKU. [S26]

Industrial Pc

Documented series: Siemens SIMATIC IPC227G industrial Box PC

Siemens AG manufactures SIMATIC industrial PCs, automation and factory-floor computing from Munich, Germany. [S28]

  • Siemens SIMATIC IPC227G industrial Box PC [S9]

Selection fit: Fanless compact Box PC for harsh factory cabinets, with Intel Atom X-series CPU options, 3x Gigabit Ethernet and DIN-rail mounting. [S29]

Industrial Router

Documented series: SCALANCE M industrial router family.

Siemens AG documents SCALANCE M as an industrial router offering. [S10]

  • SCALANCE M industrial router family. [S10]

Selection fit: Industrial router SKU in SCALANCE M family. [S30]

Industrial Switch

Documented series: SCALANCE X-200 managed industrial Ethernet switches.

Siemens AG documents an industrial Ethernet switch offering. [S31]

Documented specifications for Industrial Switch
Ingress protectionIP65 [S34]
  • SCALANCE X-200 managed industrial Ethernet switches. [S11]

Selection fit: Managed industrial Ethernet switch family for harsh automation environments with VLAN, redundancy, PROFINET, and EtherNet/IP diagnostics. [S32]

Mcc Cabinet

Documented series: Siemens tiastar standard motor control center

Siemens AG manufactures tiastar motor control centers and low-voltage power distribution equipment from Munich, Germany. [S35]

  • Siemens tiastar standard motor control center [S36]

Selection fit: tiastar standard MCCs are modular UL/NEMA motor control center sections for industrial power distribution and centralized motor starter lineups. [S36]

Medium Voltage Vfd

Documented series: Siemens SINAMICS PERFECT HARMONY GH180

Siemens documents GH180 as a finished medium-voltage converter family. [S37]

Cell and transformer design
The family uses series-connected power cells to create medium voltage and integrates a transformer. [S38]
Configured range
The official route states that voltage and output power can be adjusted across a wide range with reduced cabinet width. [S39]
  • Siemens SINAMICS PERFECT HARMONY GH180 [S37]

Selection fit: Cell count, voltage, output, motor, cooling, width and availability require a current configured data set. [S40]

Motion Controller

Documented series: Siemens SINUMERIK 828D CNC motion controller

Siemens AG supplies CNC and motion-control systems for machine tools and industrial automation from Germany. [S12]

  • Siemens SINUMERIK 828D CNC motion controller [S42]

Selection fit: SINUMERIK 828D is a compact CNC motion controller for mid-range machine tools that need precision milling and turning control. [S42]

Motor Protector

Documented series: Siemens SIRIUS 3RV2 motor starter protector

Siemens manufactures industrial automation and SIRIUS low-voltage motor control and protection devices. [S43]

  • Siemens SIRIUS 3RV2 motor starter protector [S44]

Selection fit: IEC motor-starter protector / MPCB for short-circuit, overload and phase-failure protection of motor feeders. [S44]

Multifunction Power Meter

Documented series: Siemens SENTRON 7KM PAC3220 and PAC3220 MID meters

Siemens documents 7KM PAC3220 and PAC3220 MID as finished SENTRON measuring devices. [S45]

Energy and interface
PAC3220 records energy and power data and provides an integrated web interface plus two Ethernet ports. [S46]
Expansion and variant
The family supports expansion modules and includes a calibrated tamper-proof PAC3220 MID variant. [S47]
  • Siemens SENTRON 7KM PAC3220 and PAC3220 MID meters [S45]

Selection fit: The image and facts are family-level and do not imply that every option is shared by every SENTRON meter. [S48]

Plc

Documented series: Siemens SIMATIC S7-1200 G2 modular PLC

Siemens AG manufactures SIMATIC programmable logic controllers and industrial automation systems from Munich, Germany. [S28]

  • Siemens SIMATIC S7-1200 G2 modular PLC [S50]

Selection fit: Compact modular PLC for machine and line control, with onboard I/O, PROFINET and scalable signal-board expansion. [S51]

Remote Io Module

Documented series: Siemens SIMATIC ET 200SP modular distributed I/O system.

Siemens develops industrial automation, electrification, and digitalization technology. [S52]

Documented specifications for Remote Io Module
StandardEN 61508 [S55]
  • Siemens SIMATIC ET 200SP modular distributed I/O system. [S52]

Selection fit: Compact control-cabinet distributed I/O for multi-protocol industrial networks. [S53]

Safety Plc

Documented series: Siemens SIMATIC fail-safe CPU (S7 family safety-related controllers)

Siemens AG manufactures SIMATIC controllers including fail-safe CPU variants for machine and plant safety applications from Munich, Germany. [S28]

  • Siemens SIMATIC fail-safe CPU (S7 family safety-related controllers) [S56]

Selection fit: Fail-safe SIMATIC CPU option for safety-related machine control in the same engineering environment as standard PLC tasks. [S57]

Scada Software

Documented series: SIMATIC WinCC V8 SCADA system

Siemens documents SIMATIC WinCC V8 as a scalable industrial SCADA software system. [S58]

Documented specifications for Scada Software
StandardIEC 62443 [S62]
  • SIMATIC WinCC V8 SCADA system [S59]

Selection fit: WinCC Unified and WinCC Open Architecture remain sibling SCADA families and are outside this exact WinCC V8 membership. [S60]

Servo Drive

Documented series: Siemens SINAMICS S210 servo drive system

Siemens documents SINAMICS S210 as a finished servo-drive system for closed-loop motor control. [S63]

Documented specifications for Servo Drive
StandardEN 61508 [S68]
Power range0.1–7 kW [S69]
Power and communications
The family lists 0.1–7 kW and PROFINET IRT plus EtherNet/IP communications. [S64]
Control and safety
Paired SIMOTICS servomotors provide closed control, while listed drive safety functions include STO and SBC. [S65]
  • Siemens SINAMICS S210 servo drive system [S63]

Selection fit: Power, motor pairing, communications, licensed safety functions, supply class and regional availability are variant-dependent. [S66]

Servo Motor

Documented series: Siemens SIMOTICS S-1FK2 and S-1FT2 servomotors

Siemens documents SIMOTICS S-1FK2 and S-1FT2 as industrial servomotor families. [S70]

Power ranges
S-1FK2 covers 0.26–7.1 kW while S-1FT2 covers 0.26–15.7 kW. [S71]
Speed and torque
Both series list speeds up to 6,000 r/min, with rated-torque ranges extending to 34.5 Nm and 58 Nm respectively. [S72]
  • Siemens SIMOTICS S-1FK2 and S-1FT2 servomotors [S70]

Selection fit: Output, torque, cooling, inertia, feedback, connection technology, speed and compatible SINAMICS drive depend on the selected motor. [S73]

Soft Starter

Documented series: Siemens SIRIUS 3RW soft starters

Siemens documents SIRIUS 3RW as a named family of finished motor soft starters. [S75]

Starting functions
The family provides controlled soft start and soft stop for three-phase motors. [S76]
Control and protection
The official page lists adjustable ramps, torque control and integrated motor protection. [S77]
  • Siemens SIRIUS 3RW soft starters [S75]

Selection fit: Current, voltage, bypass, communications, failsafe functions and protection vary among 3RW variants. [S78]

Thermal Relay

Documented series: Siemens SIRIUS 3RU2 thermal overload relay

Siemens manufactures SIRIUS industrial controls including 3RU2 thermal overload relays. [S80]

  • Siemens SIRIUS 3RU2 thermal overload relay [S81]

Selection fit: IEC thermal overload relay for SIRIUS motor starters, inverse-time protection up to 100 A against overload and phase failure. [S82]

Product range and documented series

Siemens AG manufactures SIVACON low-voltage switchboards and SIVACON 8PS busbar trunking systems from Germany. [S12]

  • Siemens SIVACON 8PS LData busbar trunking system [S4]Source note: SIVACON 8PS busbar trunking systems | Siemens Skip to main content This page is displayed using a
  • Siemens 3WA air circuit breakers / low-voltage switchgear [S5]Source note: Siemens 3WA air circuit breakers / low-voltage switchgear
  • SIRIUS industrial contactors and controls [S6]Source note: hing contactor and motor protection/circuit breaker. SIRIUS Control all 3RA2 Load feeders The 3RA2 fuseless load feeders consist of the
  • Siemens SIMATIC HMI Unified Panels [S7]Source note: Siemens SIMATIC HMI Unified Panels
  • Siemens SCALANCE M industrial modem/router family. [S8]Source note: Siemens SCALANCE M industrial modem/router family.
  • Siemens SIMATIC IPC227G industrial Box PC [S9]Source note: SIMATIC IPC227G | Siemens Skip to main content Home SIMATIC Products SIMATIC IPC227G SIMATIC Box PCs SIMA
  • SCALANCE M industrial router family. [S10]Source note: SCALANCE M industrial router family.
  • SCALANCE X-200 managed industrial Ethernet switches. [S11]Source note: SCALANCE X-200 managed industrial Ethernet switches.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Coverage is limited to cited first-party circuit-breaker facts. [S20]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to Siemens SIMATIC HMI Unified Panels; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S25]Company-stated
  • Coverage is limited to cited first-party facts. [S27]Company-stated
  • Coverage is limited to cited first-party facts. [S27]Company-stated
  • Coverage is limited to cited first-party industrial switch facts. [S33]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to Siemens SINAMICS PERFECT HARMONY GH180; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S41]Company-stated

Frequently asked questions

What Busway product is documented for Siemens AG?

The retained product material names Siemens SIVACON 8PS LData busbar trunking system. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S20][S25]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.